This python program receives sms from a gsm modem using at command and sends it to a server via post request.
These external python library was used in this program
- pyserial (https://pypi.python.org/pypi/pyserial)
- requests (https://pypi.python.org/pypi/requests/)
- configparser (https://pypi.python.org/pypi/configparser)
- termcolor (https://pypi.python.org/pypi/termcolor)
pip install -r requirements.txt -t ./
To use this first you need to edit config.ini. Place the right port , and baudrate. If you need to send message to a server in server section set send: true and put the address of the server.
[Device]
Port: /dev/ttyUSB0
Baud_Rate: 115200
[Server]
Send: true
Address: http://localhost/receive.php
If you dont know what is your port use dmesg | grep tty command to find the port address of your USB serial device.
Then make the program executable using sudo chmod +x receive.py.
To execute the program use sudo ./receive.py