Password is required during a baremetal installation.

[yumin-l]

I'm walking through the installation guide: https://docs.openedgeplatform.intel.com/dev/edge-microvisor-toolkit/get-started/deployment/emt-bare-metal.html.
I flashed the iso into a usb driver and boot from it on a coyotepass m50cyp server.
And here is what i see after the boot.

The system asked me to provide the current password but i have no idea what it is. There is no other options for me to choose.
Could you give me some guide to resolve this? How can i proceed the installation?

[cookesan]

That prompt is not the expected first screen for the documented ISO install flow.

The bare-metal guide says that after booting the ISO you should be prompted to choose Terminal Installer or Graphical Installer, then later create a new username and password during the installer flow. The ISO boot config also points at an initrd that runs runliveinstaller; it is not documented as requiring a pre-existing login password before the installer starts.

I would check these two things first:

• In the boot menu, choose the normal Edge Microvisor Toolkit entry, or try Edge Microvisor Toolkit (No Serial Console) if the server/BMC serial console is interfering with the UI.
• Make sure the server really booted the USB ISO, not an existing installed OS or the RAW image path. The guide treats RAW images differently and says custom RAW images need user credentials added before building.

If both boot entries land at the same "current password" prompt, a screenshot or exact prompt text would be useful. From the current docs/source, there is no default installer password to provide; the installer should reach the installer selection screen and then the user-creation step.