Open
Description
[console-pexpect]#hexdump -C /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-0054/eeprom
hexdump -C /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-00[ 1135.462750269,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1135.462755657,6] IPMI: dropping non severe PEL event
[ 1135.462757151,3] XSCOM: Write failed, ret = -29
54/eepr[ 1135.466254208,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
o[ 1135.470762157,3] MFSI 0:0: Access error on port 6, stat=000100000000
m
[ 1135.479024639,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1135.482847023,3] I2C: Failed to disable the sensor cache
[ 1135.482937987,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1135.482942490,6] IPMI: dropping non severe PEL event
[ 1135.482943740,3] XSCOM: Write failed, ret = -29
[ 1135.486352234,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1135.487400528,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1136.012841309,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1136.013898783,3] I2C: Failed to read the MODE_REG
[ 1136.013951468,3] I2C: Failed to program the MODE_REG
[ 1136.015221990,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1136.015226255,6] IPMI: dropping non severe PEL event
[ 1136.015227448,3] XSCOM: Write failed, ret = -29
[ 1136.028131919,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1136.029356191,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1136.030405544,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1136.031455999,3] I2C: Failed to read the MODE_REG
[ 1136.053189519,3] I2C: Failed to program the MODE_REG
[ 1136.054279455,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1136.054283759,6] IPMI: dropping non severe PEL event
[ 1136.054284955,3] XSCOM: Write failed, ret = -29
[ 1136.066151068,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1136.067281313,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1136.084236627,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1136.085479593,3] I2C: Failed to read the MODE_REG
[ 1136.086544271,3] I2C: Failed to program the MODE_REG
[ 1136.087622899,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1136.087627161,6] IPMI: dropping non severe PEL event
[ 1136.087628338,3] XSCOM: Write failed, ret = -29
[ 1136.097996239,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1136.124931151,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1136.127174672,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1136.127244629,3] I2C: Failed to read the MODE_REG
[ 1136.128269317,3] I2C: Failed to program the MODE_REG
[ 1136.138108406,3] SLW: timer stuck, falling back to OPAL pollers. You will likely have slower I2C and may have experienced increased jitter.
[ 1136.138110534,7] SLW: Stuck with odd generation !
[ 1136.156251127,3] XSCOM: read error gcid=0x0 pcb_addr=0x5001c stat=0x7
[ 1136.156255311,6] IPMI: dropping non severe PEL event
[ 1136.156256545,3] XSCOM: Read failed, ret = -29
hexdump: /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-0054/eeprom: Connection timed out
[console-pexpect]#echo $?
echo $?
0
# LAST COMMAND EXIT CODE 0 ('0\r\n')
[console-pexpect]#hexdump -C /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-0054/eeprom
hexdump -C /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-0054/eeprom
[ 1138.149465503,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1138.149470868,6] IPMI: dropping non severe PEL event
[ 1138.149472351,3] XSCOM: Write failed, ret = -29
[ 1138.153741193,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1138.158166095,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1138.159228855,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1138.165905839,3] I2C: Failed to read the MODE_REG
[ 1138.170161631,3] I2C: Failed to program the MODE_REG
[ 1138.171425632,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1138.171429911,6] IPMI: dropping non severe PEL event
[ 1138.171431119,3] XSCOM: Write failed, ret = -29
[ 1138.173526759,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1138.174643323,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1138.180032870,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1138.186984257,3] I2C: Failed to read the MODE_REG
[ 1138.187039376,3] I2C: Failed to program the MODE_REG
[ 1138.191133955,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1138.191138229,6] IPMI: dropping non severe PEL event
[ 1138.191139455,3] XSCOM: Write failed, ret = -29
[ 1138.194432887,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1138.195483661,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1138.207844623,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1138.212526847,3] I2C: Failed to read the MODE_REG
[ 1138.214637599,3] I2C: Failed to program the MODE_REG
[ 1138.215916229,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1138.215920520,6] IPMI: dropping non severe PEL event
[ 1138.215921742,3] XSCOM: Write failed, ret = -29
[ 1138.228018927,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1138.232247792,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1138.233519537,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1138.234574421,3] I2C: Failed to read the MODE_REG
[ 1138.235667778,3] I2C: Failed to program the MODE_REG
[ 1138.240324191,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1138.240328449,6] IPMI: dropping non severe PEL event
[ 1138.240329642,3] XSCOM: Write failed, ret = -29
[ 1138.248378236,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1138.252553084,3] MFSI 0:0: Access error on port 6, stat=000100000000
[ 1138.253810646,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[ 1138.254853776,3] I2C: Failed to read the MODE_REG
[ 1138.255883563,3] I2C: Failed to program the MODE_REG
hexdump: /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-0054/eeprom: Connection timed out
[console-pexpect]#echo $?
echo $?
0
# LAST COMMAND EXIT CODE 0 ('0\r\n')
--- hexdump -C /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-0054/eeprom
+++ hexdump -C /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-0054/eeprom
@@ -1,41 +1,45 @@
-[ 1138.149465503,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
-[ 1138.149470868,6] IPMI: dropping non severe PEL event
-[ 1138.149472351,3] XSCOM: Write failed, ret = -29
-[ 1138.153741193,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
-[ 1138.158166095,3] MFSI 0:0: Access error on port 6, stat=000100000000
-[ 1138.159228855,3] CENTAUR 80000005: MFSI write error -6 writing CMD
-[ 1138.165905839,3] I2C: Failed to read the MODE_REG
-[ 1138.170161631,3] I2C: Failed to program the MODE_REG
-[ 1138.171425632,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
-[ 1138.171429911,6] IPMI: dropping non severe PEL event
-[ 1138.171431119,3] XSCOM: Write failed, ret = -29
-[ 1138.173526759,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
-[ 1138.174643323,3] MFSI 0:0: Access error on port 6, stat=000100000000
-[ 1138.180032870,3] CENTAUR 80000005: MFSI write error -6 writing CMD
-[ 1138.186984257,3] I2C: Failed to read the MODE_REG
-[ 1138.187039376,3] I2C: Failed to program the MODE_REG
-[ 1138.191133955,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
-[ 1138.191138229,6] IPMI: dropping non severe PEL event
-[ 1138.191139455,3] XSCOM: Write failed, ret = -29
-[ 1138.194432887,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
-[ 1138.195483661,3] MFSI 0:0: Access error on port 6, stat=000100000000
-[ 1138.207844623,3] CENTAUR 80000005: MFSI write error -6 writing CMD
-[ 1138.212526847,3] I2C: Failed to read the MODE_REG
-[ 1138.214637599,3] I2C: Failed to program the MODE_REG
-[ 1138.215916229,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
-[ 1138.215920520,6] IPMI: dropping non severe PEL event
-[ 1138.215921742,3] XSCOM: Write failed, ret = -29
-[ 1138.228018927,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
-[ 1138.232247792,3] MFSI 0:0: Access error on port 6, stat=000100000000
-[ 1138.233519537,3] CENTAUR 80000005: MFSI write error -6 writing CMD
-[ 1138.234574421,3] I2C: Failed to read the MODE_REG
-[ 1138.235667778,3] I2C: Failed to program the MODE_REG
-[ 1138.240324191,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
-[ 1138.240328449,6] IPMI: dropping non severe PEL event
-[ 1138.240329642,3] XSCOM: Write failed, ret = -29
-[ 1138.248378236,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
-[ 1138.252553084,3] MFSI 0:0: Access error on port 6, stat=000100000000
-[ 1138.253810646,3] CENTAUR 80000005: MFSI write error -6 writing CMD
-[ 1138.254853776,3] I2C: Failed to read the MODE_REG
-[ 1138.255883563,3] I2C: Failed to program the MODE_REG
+[ 1135.462755657,6] IPMI: dropping non severe PEL event
+[ 1135.462757151,3] XSCOM: Write failed, ret = -29
+54/eepr[ 1135.466254208,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
+o[ 1135.470762157,3] MFSI 0:0: Access error on port 6, stat=000100000000
+m
+[ 1135.479024639,3] CENTAUR 80000005: MFSI write error -6 writing CMD
+[ 1135.482847023,3] I2C: Failed to disable the sensor cache
+[ 1135.482937987,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
+[ 1135.482942490,6] IPMI: dropping non severe PEL event
+[ 1135.482943740,3] XSCOM: Write failed, ret = -29
+[ 1135.486352234,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
+[ 1135.487400528,3] MFSI 0:0: Access error on port 6, stat=000100000000
+[ 1136.012841309,3] CENTAUR 80000005: MFSI write error -6 writing CMD
+[ 1136.013898783,3] I2C: Failed to read the MODE_REG
+[ 1136.013951468,3] I2C: Failed to program the MODE_REG
+[ 1136.015221990,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
+[ 1136.015226255,6] IPMI: dropping non severe PEL event
+[ 1136.015227448,3] XSCOM: Write failed, ret = -29
+[ 1136.028131919,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
+[ 1136.029356191,3] MFSI 0:0: Access error on port 6, stat=000100000000
+[ 1136.030405544,3] CENTAUR 80000005: MFSI write error -6 writing CMD
+[ 1136.031455999,3] I2C: Failed to read the MODE_REG
+[ 1136.053189519,3] I2C: Failed to program the MODE_REG
+[ 1136.054279455,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
+[ 1136.054283759,6] IPMI: dropping non severe PEL event
+[ 1136.054284955,3] XSCOM: Write failed, ret = -29
+[ 1136.066151068,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
+[ 1136.067281313,3] MFSI 0:0: Access error on port 6, stat=000100000000
+[ 1136.084236627,3] CENTAUR 80000005: MFSI write error -6 writing CMD
+[ 1136.085479593,3] I2C: Failed to read the MODE_REG
+[ 1136.086544271,3] I2C: Failed to program the MODE_REG
+[ 1136.087622899,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
+[ 1136.087627161,6] IPMI: dropping non severe PEL event
+[ 1136.087628338,3] XSCOM: Write failed, ret = -29
+[ 1136.097996239,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
+[ 1136.124931151,3] MFSI 0:0: Access error on port 6, stat=000100000000
+[ 1136.127174672,3] CENTAUR 80000005: MFSI write error -6 writing CMD
+[ 1136.127244629,3] I2C: Failed to read the MODE_REG
+[ 1136.128269317,3] I2C: Failed to program the MODE_REG
+[ 1136.138108406,3] SLW: timer stuck, falling back to OPAL pollers. You will likely have slower I2C and may have experienced increased jitter.
+[ 1136.138110534,7] SLW: Stuck with odd generation !
+[ 1136.156251127,3] XSCOM: read error gcid=0x0 pcb_addr=0x5001c stat=0x7
+[ 1136.156255311,6] IPMI: dropping non severe PEL event
+[ 1136.156256545,3] XSCOM: Read failed, ret = -29
hexdump: /sys/devices/platform/3e0a000000000.memory-buffer:i2cm@a0000:i2c-bus@1/i2c-7/7-0054/eeprom: Connection timed out
FAIL (11.045s)
runTest (testcases.I2C.BasicSkirootI2C) ... OpTestSystem START STATE: 4 (target 4)
OpTestSystem TRANSITIONED TO: 4
[console-pexpect]#^L^L^[[H^M[console-pexpect]#^[[JPS1=[console-pexpect]\#
^[[H^M[console-pexpect]#^[[JPS1=[console-pexpect]\#
Shell prompt changed
[console-pexpect]#i2cdetect -l
i2cdetect -l
i2c-3 i2c cen_80000001_e0p1 I2C adapter
i2c-1 i2c cen_80000000_e0p1 I2C adapter
i2c-11 i2c AST i2c bit bus I2C adapter
i2c-8 i2c p8_00000000_e0p0 I2C adapter
i2c-6 i2c cen_80000005_e0p0 I2C adapter
i2c-4 i2c cen_80000004_e0p0 I2C adapter
i2c-2 i2c cen_80000001_e0p0 I2C adapter
i2c-0 i2c cen_80000000_e0p0 I2C adapter
i2c-9 i2c p8_00000000_e0p1 I2C adapter
i2c-10 i2c p8_00000000_e1p2 I2C adapter
i2c-7 i2c cen_80000005_e0p1 I2C adapter
i2c-5 i2c cen_80000004_e0p1 I2C adapter
[console-pexpect]#echo $?
echo $?
0
# LAST COMMAND EXIT CODE 0 ('0\r\n')
[console-pexpect]#i2cdetect -l | awk '{print $1}'
i2cdetect -l | awk '{print $1}'
i2c-3
i2c-1
i2c-11
i2c-8
i2c-6
i2c-4
i2c-2
i2c-0
i2c-9
i2c-10
i2c-7
i2c-5
[console-pexpect]#echo $?
echo $?
0
# LAST COMMAND EXIT CODE 0 ('0\r\n')
Querying the i2c bus 3 for devices attached to it
[console-pexpect]#i2cdetect -y 3
i2cdetect -y 3
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: [ 1143.175019112,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.175023967,6] IPMI: dropping non severe PEL event
[ 1143.175025311,3] XSCOM: Write failed, ret = -29
[ 1143.192724993,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.193805420,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.194878649,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.198979905,3] I2C: Failed to disable the sensor cache
[ 1143.200058127,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.200062479,6] IPMI: dropping non severe PEL event
[ 1143.200063743,3] XSCOM: Write failed, ret = -29
[ 1143.212527211,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.213567398,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.214642057,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.215664980,3] I2C: Failed to read the MODE_REG
[ 1143.220048072,3] I2C: Failed to program the MODE_REG
[ 1143.221270255,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.221274542,6] IPMI: dropping non severe PEL event
[ 1143.221275735,3] XSCOM: Write failed, ret = -29
[ 1143.233478601,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.235561170,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.239938366,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.241175957,3] I2C: Failed to read the MODE_REG
[ 1143.257432501,3] I2C: Failed to program the MODE_REG
[ 1143.258489548,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.258493796,6] IPMI: dropping non severe PEL event
[ 1143.258494991,3] XSCOM: Write failed, ret = -29
[ 1143.260827820,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.261899567,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.272667887,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.272770872,3] I2C: Failed to read the MODE_REG
[ 1143.273992241,3] I2C: Failed to program the MODE_REG
[ 1143.275165132,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.275169426,6] IPMI: dropping non severe PEL event
[ 1143.275170639,3] XSCOM: Write failed, ret = -29
[ 1143.281451665,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.282523375,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.289533549,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.293850117,3] I2C: Failed to read the MODE_REG
[ 1143.295112514,3] I2C: Failed to program the MODE_REG
-- [ 1143.296278959,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.296284127,6] IPMI: dropping non severe PEL event
[ 1143.296285590,3] XSCOM: Write failed, ret = -29
[ 1143.307507235,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.324706335,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.325766236,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.330308783,3] I2C: Failed to read the MODE_REG
[ 1143.331371663,3] I2C: Failed to program the MODE_REG
[ 1143.332511659,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.332515976,6] IPMI: dropping non severe PEL event
[ 1143.332517192,3] XSCOM: Write failed, ret = -29
[ 1143.338729733,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.338791119,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.346008701,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.351450582,3] I2C: Failed to read the MODE_REG
[ 1143.351504137,3] I2C: Failed to program the MODE_REG
[ 1143.352598753,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.352603009,6] IPMI: dropping non severe PEL event
[ 1143.352604216,3] XSCOM: Write failed, ret = -29
[ 1143.366640693,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.371083499,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.372139311,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.373250817,3] I2C: Failed to read the MODE_REG
[ 1143.374290141,3] I2C: Failed to program the MODE_REG
[ 1143.378929231,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.378933524,6] IPMI: dropping non severe PEL event
[ 1143.378934727,3] XSCOM: Write failed, ret = -29
[ 1143.391843384,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.402187259,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.403446178,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.404500838,3] I2C: Failed to read the MODE_REG
[ 1143.408882047,3] I2C: Failed to program the MODE_REG
[ 1143.409989178,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.409993423,6] IPMI: dropping non severe PEL event
[ 1143.409994623,3] XSCOM: Write failed, ret = -29
[ 1143.427447354,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.428677433,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.430674353,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.437453473,3] I2C: Failed to read the MODE_REG
[ 1143.441875727,3] I2C: Failed to program the MODE_REG
-- [ 1143.442021379,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.442025919,6] IPMI: dropping non severe PEL event
[ 1143.442027183,3] XSCOM: Write failed, ret = -29
[ 1143.445393104,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.446426362,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.450539929,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.451608618,3] I2C: Failed to read the MODE_REG
[ 1143.458498334,3] I2C: Failed to program the MODE_REG
[ 1143.462925062,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[ 1143.462929393,6] IPMI: dropping non severe PEL event
[ 1143.462930591,3] XSCOM: Write failed, ret = -29
[ 1143.478288459,3] MFSI 0:0: XSCOM error -29 writing OPB CMD
[ 1143.479347271,3] MFSI 0:0: Access error on port 2, stat=000100000000
[ 1143.484224840,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[ 1143.486304863,3] CENTAUR: Offlined 80000001 due to > 10 consecutive XSCOM errors. No more XSCOMs to this centaur.
[ 1143.491979306,3] I2C: Failed to read the MODE_REG
[ 1143.499950303,3] I2C: Failed to program the MODE_REG
[ 1144.002006327,3] I2C: Failed to read the MODE_REG
[ 1144.002061892,3] I2C: Failed to program the MODE_REG
[ 1144.003263251,3] I2C: Failed to read the MODE_REG
[ 1144.004329348,3] I2C: Failed to program the MODE_REG
[ 1144.005367554,3] I2C: Failed to read the MODE_REG
[ 1144.014708383,3] I2C: Failed to program the MODE_REG
-- [ 1144.015789895,3] I2C: Failed to read the MODE_REG
[ 1144.042845531,3] I2C: Failed to program the MODE_REG
[ 1144.042903805,3] I2C: Failed to read the MODE_REG
[ 1144.044136548,3] I2C: Failed to program the MODE_REG
[ 1144.045158821,3] I2C: Failed to read the MODE_REG
[ 1144.046209458,3] I2C: Failed to program the MODE_REG
[ 1144.055471119,3] I2C: Failed to read the MODE_REG
[ 1144.056606351,3] I2C: Failed to program the MODE_REG
[ 1144.056663565,3] I2C: Failed to read the MODE_REG
[ 1144.088808006,3] I2C: Failed to program the MODE_REG
-- [ 1144.090141839,3] I2C: Failed to read the MODE_REG
[ 1144.091181575,3] I2C: Failed to program the MODE_REG
[ 1144.092257478,3] I2C: Failed to read the MODE_REG
[ 1144.094557420,3] I2C: Failed to program the MODE_REG
[ 1144.094616487,3] I2C: Failed to read the MODE_REG
[ 1144.096682231,3] I2C: Failed to program the MODE_REG
[ 1144.097731542,3] I2C: Failed to read the MODE_REG
[ 1144.102730163,3] I2C: Failed to program the MODE_REG
[ 1144.108851919,3] I2C: Failed to read the MODE_REG
[ 1144.110091689,3] I2C: Failed to program the MODE_REG
-- [ 1144.111172538,3] I2C: Failed to read the MODE_REG
[ 1144.112268358,3] I2C: Failed to program the MODE_REG
[ 1144.112325304,3] I2C: Failed to read the MODE_REG
[ 1144.113338319,3] I2C: Failed to program the MODE_REG
[ 1144.120619919,3] I2C: Failed to read the MODE_REG
[ 1144.124888199,3] I2C: Failed to program the MODE_REG
[ 1144.125940606,3] I2C: Failed to read the MODE_REG
[ 1144.125997193,3] I2C: Failed to program the MODE_REG
[ 1144.128101985,3] I2C: Failed to read the MODE_REG
[ 1144.132346276,3] I2C: Failed to program the MODE_REG
-- [ 1144.133650399,3] I2C: Failed to read the MODE_REG
[ 1144.140751935,3] I2C: Failed to program the MODE_REG
[ 1144.154902778,3] I2C: Failed to read the MODE_REG
[ 1144.154956787,3] I2C: Failed to program the MODE_REG
[ 1144.159807840,3] I2C: Failed to read the MODE_REG
[ 1144.164124033,3] I2C: Failed to program the MODE_REG
[ 1144.170306895,3] I2C: Failed to read the MODE_REG
[ 1144.171541352,3] I2C: Failed to program the MODE_REG
[ 1144.172589549,3] I2C: Failed to read the MODE_REG
[ 1144.173602239,3] I2C: Failed to program the MODE_REG
-- [ 1144.174691857,3] I2C: Failed to read the MODE_REG
[ 1144.174743475,3] I2C: Failed to program the MODE_REG
[ 1144.182129172,3] I2C: Failed to read the MODE_REG
[ 1144.186343500,3] I2C: Failed to program the MODE_REG
[ 1144.187448322,3] I2C: Failed to read the MODE_REG
[ 1144.189678320,3] I2C: Failed to program the MODE_REG
[ 1144.194547983,3] I2C: Failed to read the MODE_REG
[ 1144.194602353,3] I2C: Failed to program the MODE_REG
[ 1144.216288497,3] I2C: Failed to read the MODE_REG
[ 1144.217542842,3] I2C: Failed to program the MODE_REG
-- [ 1144.218621199,3] I2C: Failed to read the MODE_REG
[ 1144.219753951,3] I2C: Failed to program the MODE_REG
[ 1144.220789133,3] I2C: Failed to read the MODE_REG
[ 1144.220840613,3] I2C: Failed to program the MODE_REG
[ 1144.224995791,3] I2C: Failed to read the MODE_REG
[ 1144.226033575,3] I2C: Failed to program the MODE_REG
[ 1144.233069425,3] I2C: Failed to read the MODE_REG
[ 1144.247070828,3] I2C: Failed to program the MODE_REG
[ 1144.248320611,3] I2C: Failed to read the MODE_REG
[ 1144.249433572,3] I2C: Failed to program the MODE_REG
-- [ 1144.250476113,3] I2C: Failed to read the MODE_REG
[ 1144.250558509,3] I2C: Failed to program the MODE_REG
[ 1144.251714847,3] I2C: Failed to read the MODE_REG
[ 1144.256192394,3] I2C: Failed to program the MODE_REG
[ 1144.263393259,3] I2C: Failed to read the MODE_REG
[ 1144.264448522,3] I2C: Failed to program the MODE_REG
[ 1144.268837540,3] I2C: Failed to read the MODE_REG
[ 1144.268892204,3] I2C: Failed to program the MODE_REG
[ 1144.270978849,3] I2C: Failed to read the MODE_REG
[ 1144.272213575,3] I2C: Failed to program the MODE_REG
-- [ 1144.276359186,3] I2C: Failed to read the MODE_REG
[ 1144.277473623,3] I2C: Failed to program the MODE_REG
[ 1144.283881244,3] I2C: Failed to read the MODE_REG
[ 1144.284925215,3] I2C: Failed to program the MODE_REG
[ 1144.284984737,3] I2C: Failed to read the MODE_REG
[ 1144.286007013,3] I2C: Failed to program the MODE_REG
[ 1144.287050527,3] I2C: Failed to read the MODE_REG
[ 1144.308716271,3] I2C: Failed to program the MODE_REG
[ 1144.309937788,3] I2C: Failed to read the MODE_REG
[ 1144.311025750,3] I2C: Failed to program the MODE_REG
--[ 1144.311123533,3] I2C: Failed to read the MODE_REG
[ 1144.312211887,3] I2C: Failed to program the MODE_REG
[ 1144.313283957,3] I2C: Failed to read the MODE_REG
[ 1144.317431240,3] I2C: Failed to program the MODE_REG
[ 1144.318484056,3] I2C: Failed to read the MODE_REG
[ 1144.325360021,3] I2C: Failed to program the MODE_REG
[ 1144.325419055,3] I2C: Failed to read the MODE_REG
[ 1144.330751034,3] I2C: Failed to program the MODE_REG
[ 1144.332784434,3] I2C: Failed to read the MODE_REG