Skip to content

README.md

Latest commit

 

History

History
108 lines (88 loc) · 2.57 KB

README.md

File metadata and controls

108 lines (88 loc) · 2.57 KB

gNMI-3: union_replace

Summary

Perform a series of tests that validate the union_replace specification.

In depth tests for use of union_replace should reside within the features being tested.

Testbed type

  • Single DUT testbed

Procedure

Test environment setup

  • Get the DUT configuriation in CLI format and store as baseline_cfg.

gNMI-3.6 - union_replace accepted with warning

Interface configurations containing a mismatch with hardware (for example, due to a missing or incompatible transceiver module) must be accepted by a device. The interface with a configuration which doesn't match the hardware is expected to be in a down operational state as the result of such a configuration commit.

Steps

  • Generate a configuration baseline_cfg + D.1 where D1. contains a port-speed in OC which does not match the DUT hardware.
  • Push the configuration to the DUT Verify the gnmi.Set is accepted
  • Get configuration D.2
  • Verify D.1 == D.2. That is, verify only the interface speed is changed between baseline_cfg and D.3. The remaining CLI and all OC must be unchanged.

gnmi3.6.1 verify configuration with OC with warning is accepted Generate a configuration D.2 with a port-speed mismatch in the OC which should be accepted and applied by the DUT.

gnmi3.6.2 verify configuration with CLI with warning is accepted

Generate a configuration D.2 with a port-speed mismatch in the CLI which should be accepted and applied by the DUT.

Canonical OC

{
  "components": {
    "component": [
      {
        "config": {
          "name": "Port0/1"
        },
        "name": "eth0",
        "port": {
          "breakout-mode": {
            "groups": {
              "group": [
                {
                  "config": {
                    "breakout-speed": "SPEED_100GB",
                    "index": 1,
                    "num-breakouts": 4,
                    "num-physical-channels": 1
                  },
                  "index": 1
                }
              ]
            }
          }
        }
      }
    ]
  },
  "interfaces": {
    "interface": [
      {
        "config": {
          "description": "Customer A",
          "mtu": 1500,
          "name": "eth0/0"
        },
        "ethernet": {
          "config": {
            "port-speed": "SPEED_100GB"
          }
        },
        "name": "eth0/0"
      }
    ]
  }
}

OpenConfig Path and RPC Coverage

paths:
  /interfaces/interface/ethernet/config/port-speed:
  /interfaces/interface/ethernet/state/port-speed:

rpcs:
  gnmi:
    gNMI.Set:
    gNMI.Get:
    gNMI.Subscribe: