Registrar cannot register declaration for 24 hours when submitted by Assistant Registrar from computer

[ThierryMyshepherd]

When an Assistant Registrar submits a declaration for approval using a computer, the Registrar can see the declaration in the approval queue immediately, but the "Register" button remains disabled for approximately 24 hours after submission.
If the same process is performed using a mobile device, the Registrar can register the declaration immediately without delay.

Environment:

• Somalia Production (v1.6.2)
• Not yet tested on v1.7 or v1.8

Steps to Reproduce:

1. Log in as Assistant Registrar on a computer.
2. Review a declaration and submit it for approval to the Registrar.
3. Log in as Registrar immediately after submission.
4. Open the declaration in the approval queue.
5. Observe that the "Register" button is disabled.
6. Wait 24 hours → Button becomes active.

Expected Behavior:
The Registrar should be able to register the declaration immediately after receiving it, regardless of whether it was submitted from a computer or mobile device.

Actual Behavior:
When submitted from a computer, the Registrar must wait ~24 hours before the "Register" button becomes active.

Frequency:
Reported in multiple offices, especially in Dinsor where large volumes of registrations occur.

Impact:

• Delays in registration processing.
• Potential backlog and bottlenecks in high-volume registration areas.

[euanmillar]

Closing as there is no evidence to support that this is anything but user error