[luxtronik_heatpump] new Parameter descriptions found

[dasSofa]

I found new Parameter descriptions by tinkering with my
Alpha Innotec WZSV 62K3M Version V3.89.5

Channel 232: Heissgas (Celsius)
Channel 232: Liquefaction_Temperature (Celsius)
Channel 237: Freq_VD_Soll (Frequency)
Channel 238: Freq_VD_Max (Frequency)
Channel 239: VBO Sollwert (Kelvin)
Channel 240: VBO aktuell (Kelvin)
Channel 241: HUP (Percent)
Channel 242: HUP Sollwert (Kelvin)
Channel 243: HUP aktuell (Kelvin)
Channel 252 : T-HG max (Celsius)
Channel 258: RBE_Version
Channel 259 : Ausgang 9 (Bool) Output 9 on the Mainboard - used for cooling active Signal for Room thermostat switching between heating and cooling. If you have the Expansion board installed, this Signal comes then from Channel 140 descriped as FP3out.
Channel 260: Freigabe Kühlung (Seconds) enable Cooling

[stefan-hoehn]

I think you rather should make that a request to be added to the binding that supports it or does it need to be added to the docs somewhere. If so, please provide a Pull Request for the respective doc page.

[dasSofa]

There is a channels List in the OpenHab docs thats why i posted it here and also in the binding itself.
It`s also my first time using github and i dont know how to make a pull request. If i find time, i will read into it how to do but propably not in the next few month because i am busy.