| layout | title |
|---|---|
documentation |
SHLM10000 - ZWave |
{% include base.html %}
This describes the Z-Wave device SHLM10000, manufactured by *ABUS Security-Center GmbH & Co. KG * with the thing type UID of abus_shlm10000_00_000.
The device is in the category of Light Bulb, defining Devices that illuminate something, such as bulbs, etc..
The SHLM10000 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
The ABUS Z-Wave LED lamp can be an optical helper in many situations in your connected home. E.g. in case of danger, the escape routes can be perfectly illuminated by scene control. And if you are not at home, you can credibly simulate your presence by configuring scenarios. When it comes to comfort, you make no compromises compared to a 60W light bulb, with significantly lower power consumption. The LED lamp produces white light (2700k and 6500k), is dimmable and fits into any conventional E27 socket. You can change the light color.
Screw the LED bulbinto a standard E27 socket. Click the + (Add) button in your Z-Wave App and follow the further instructions.
Turn the light switch on.
Switch the Power supply of the LED bulb ON and OFF 6 times in a row (interval of 0.5 to 2 seconds)
When switched on for the 7th time, the LED bulb flashes twice indicating successful reset to factory settings.
The following table summarises the channels available for the SHLM10000 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Color Control | color_color | color_color | ColorLight | Color |
| Color Temperature | color_temperature | color_temperature | ColorLight | Dimmer |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
The color channel allows to control the color of a light. It is also possible to dim values and switch the light on and off.
The color_color channel is of type color_color and supports the Color item and is in the ColorLight category.
The color temperature channel allows to set the color temperature of a light from 0 (cold) to 100 (warm).
The color_temperature channel is of type color_temperature and supports the Dimmer item and is in the ColorLight category.
The following table provides a summary of the 1 configuration parameters available in the SHLM10000. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Temperature of NTC | This parameter can only be read and not set. |
| Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |
This parameter can only be read and not set.
Values in the range 0 to 255 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_1_1 and is of type INTEGER.
This is a read only parameter.
Set the mode for the switch when receiving SWITCH ALL commands.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |
This parameter has the configuration ID switchall_mode and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The SHLM10000 supports 1 association group.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 1 node.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_SWITCH_COLOR_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V2 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.