| layout | title |
|---|---|
documentation |
ZWA001 - ZWave |
{% include base.html %}
This describes the Z-Wave device ZWA001, manufactured by Aeotec Limited with the thing type UID of aeotec_zwa001_00_000.
The device is in the category of Light Bulb, defining Devices that illuminate something, such as bulbs, etc..
The ZWA001 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Standard form factor and appearance of the light bulb with 800 lm output Tunable white: dimmable from 5% to 100%, tunable from 2700K to 6500K. Possible to be included in groups, scenes, or schedules Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc.
Reset the device :
- Please use this procedure only when the network primary controller is missing or otherwise inoperable.
- Led bulb re-power 6 times (between 0.5-2 seconds each time); If the 6th power on, the led bulb flashes twice, which means that the resetting is successful.
Add for inclusion:
- Set the Z-Wave network main controller into adding mode.
- Power cycle once for led bulb(OFF->ON).The led bulb will flash twice and send node info frame.
- Wait a moment, the led bulb should be added to the controller.Then the led bulb will flash once when it has been included into the network.
Remove for exclusion:
- Set the Z-Wave network main controller into removing mode.
- Led bulb re-power 3 times (between 0.5-2 seconds each time).
- Wait a moment, the led bulb should be removed from the controller.Then the led bulb will flash once, dim to 5% first, and then increased to 100% after 5 seconds.
The following table summarises the channels available for the ZWA001 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Scene Number | scene_number | scene_number | Number | |
| Color Control | color_color | color_color | ColorLight | Color |
| Color Temperature | color_temperature | color_temperature | ColorLight | Dimmer |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Triggers when a scene button is pressed.
The scene_number channel is of type scene_number and supports the Number item.
The color channel allows to control the color of a light. It is also possible to dim values and switch the light on and off.
The color_color channel is of type color_color and supports the Color item and is in the ColorLight category.
The color temperature channel allows to set the color temperature of a light from 0 (cold) to 100 (warm).
The color_temperature channel is of type color_temperature and supports the Dimmer item and is in the ColorLight category.
The following table provides a summary of the 3 configuration parameters available in the ZWA001. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 80 | Send notifications | Send notifications to associated devices when state is changed |
| 81 | Color temperature in warm white component | Set color temperature, available values: 2700 - 4999 |
| 82 | Color temperature in cold white component | Set color temperature, available values: 5000 - 6500 |
Send notifications to associated devices when state is changed Enable to send notifications to associated devices(Group 1) when the state of LED Bulb is changed. 0 = Nothing. 1= Basic CC report. The following option values may be configured, in addition to values in the range 0 to 1 -:
| Value | Description |
|---|---|
| 0 | Disable |
| 1 | Send Basic CC report |
The manufacturer defined default value is 1 (Send Basic CC report).
This parameter has the configuration ID config_80_1 and is of type INTEGER.
Set color temperature, available values: 2700 - 4999 Adjusting the color temperature in warm white color component. available value: 0x0A8C-1387Warm White(0x0A8C(2700k) ~ 0x1387 (4999k)) Values in the range 2700 to 4999 may be set.
The manufacturer defined default value is 2700.
This parameter has the configuration ID config_81_2 and is of type INTEGER.
Set color temperature, available values: 5000 - 6500 Adjusting the color temperature in cold white color component. available value:0x1388-0x1964 Cold White (0x1388 (5000k) ~ 0x1964 (6500k)) Values in the range 5000 to 6500 may be set.
The manufacturer defined default value is 6500.
This parameter has the configuration ID config_82_2 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The ZWA001 supports 1 association group.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 1 node.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SCENE_ACTIVATION_V1 | |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1 | |
| COMMAND_CLASS_SWITCH_COLOR_V2 | |
| COMMAND_CLASS_TRANSPORT_SERVICE_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_SUPERVISION_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_SECURITY_V1 | |
| COMMAND_CLASS_SECURITY_2_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.