| layout | title |
|---|---|
documentation |
39357 (ZW3004) - ZWave |
{% include base.html %}
This describes the Z-Wave device 39357 (ZW3004), manufactured by Honeywell with the thing type UID of honeywell_39357_00_000.
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
The 39357 (ZW3004) supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
Stay connected to your home with a Honeywell In-Wall Smart Dimmer. Compatible with all Z‑Wave certified gateways, the smart dimmer gives you wireless control of your hardwired, dimmable lights from any mobile device, computer or Z-Wave enabled remote. Installation is easy – simply replace a standard in-wall switch with the smart dimmer. Whether you’re at home or away, access the dimmer to turn your lights on and off, or to adjust the brightness levels of the room.
The smart dimmer incorporates reliable, dynamic illumination to your home, giving you a fully lit workspace or letting you settle down for the evening with effective, stylish accent lighting. Not only does the smart dimmer help cut energy costs, but it boosts the safety of your home by keeping rooms looking bright and lived‑in. The toggle-style switch comes in white and features a blue LED indicator light to locate the dimmer in a dark room. Give your space the perfect amount of light with a Honeywell In-Wall Smart Dimmer. This product is ALEXA COMPATIBLE however it REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately).
Features
- ALEXA COMPATIBLE (HUB REQUIRED) - Requires an Alexa supported hub for voice control with Amazon Echo Products (Alexa device and hub are sold separately).Cannot connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)
- REQUIRES A Z-WAVE CERTIFIED HUB - Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Smart Security, Harmony Home Hub Extender, Vera, and Fibaro
- WIRELESSLY CONTROL & SCHEDULE LIGHTS AND OTHER DEVICES– Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Switch can
- FULL RANGE DIMMING – Give your space the perfect amount of light with the ability to customize the brightness levels from 0 to 100%. Works ONLY with dimmable bulbs and lamps
- IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – replace your existing in-wall switch in as little as 15 minutes. Wall plate is NOT included
Press the toggle up and release.
Press the toggle down and release.
The following table summarises the channels available for the 39357 (ZW3004) -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Scene Number | scene_number | scene_number | Number |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
Triggers when a scene button is pressed.
The scene_number channel is of type scene_number and supports the Number item.
The following table provides a summary of the 7 configuration parameters available in the 39357 (ZW3004). Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 4 | Invert Switch | |
| 7 | Z-Wave: Number of Steps or Levels | Number of steps when set by controller |
| 8 | Z-Wave: Timing of Steps or Levels | Timing when set by controller |
| 9 | Manual: Number of Steps or Levels | Number of steps when using the switch |
| 10 | Manual: Timing of Steps | Timing of steps when using the switch |
| 11 | All-On/All-Off: Number of Steps or Levels | Number of steps when receiving all-on or all-off command |
| 12 | All-On/All-Off: Timing of Steps or Levels | Timing of steps when receiving all-on or all-off command |
| Switch All Mode | Set the mode for the switch when receiving SWITCH ALL commands |
Values in the range 0 to 1 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_4_1 and is of type INTEGER.
Number of steps when set by controller Both the number of steps (or levels) that the dimmer will change and the timing of the steps can be modified to suit personal preferences. The timing of the steps can be adjusted in 10 millisecond intervals. Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_7_2 and is of type INTEGER.
Timing when set by controller Both the number of steps (or levels) that the dimmer will change and the timing of the steps can be modified to suit personal preferences. The timing of the steps can be adjusted in 10 millisecond intervals. Values in the range 1 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_8_2 and is of type INTEGER.
Number of steps when using the switch
Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_9_2 and is of type INTEGER.
Timing of steps when using the switch
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_10_2 and is of type INTEGER.
Number of steps when receiving all-on or all-off command
Values in the range 1 to 99 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_11_2 and is of type INTEGER.
Timing of steps when receiving all-on or all-off command
Values in the range 1 to 255 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_12_2 and is of type INTEGER.
Set the mode for the switch when receiving SWITCH ALL commands.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Exclude from All On and All Off groups |
| 1 | Include in All On group |
| 2 | Include in All Off group |
| 255 | Include in All On and All Off groups |
This parameter has the configuration ID switchall_mode and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The 39357 (ZW3004) supports 3 association groups.
Z-Wave Plus Lifeline, Multilevel Switch Report
Association group 1 supports 5 nodes.
Association group 2 supports 5 nodes.
Supports Basic Set and is controlled by double pressing the On or Off button
Association group 3 supports 5 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_SCENE_ACTIVATION_V1 | |
| COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1 | |
| COMMAND_CLASS_CRC_16_ENCAP_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.