Skip to content

Latest commit

 

History

History
113 lines (75 loc) · 3.3 KB

iwd600s_0_0.md

File metadata and controls

113 lines (75 loc) · 3.3 KB
layout title
documentation
IWD600S - ZWave

{% include base.html %}

IWD600S Dimmer switch 600w incandescent

This describes the Z-Wave device IWD600S, manufactured by Monster Cable with the thing type UID of monster_iwd600s_00_000.

The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

IWD600S product image

The IWD600S supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.

Overview

Scene-Capable Preset Digital / Z-Wave 900MHz Incandescent Return to Neutral Dimmer. 

Rebranded Leviton RZI06-1L

Inclusion Information

  1. Install IWD600S
  2. Place controller in inclusion mode
  3. Press light on/off paddle on IWD600S

Exclusion Information

  1. Place controller in exclusion mode
  2. Press light on/off paddle on IWD600S

Channels

The following table summarises the channels available for the IWD600S -:

Channel Name Channel ID Channel Type Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number scene_number Number

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel is of type scene_number and supports the Number item.

Device Configuration

The device has no configuration parameters defined.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The IWD600S supports 1 association group.

Group 1: Controller Updates

Association group 1 supports 1 node.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1
COMMAND_CLASS_BASIC_V1
COMMAND_CLASS_SWITCH_MULTILEVEL_V1 Linked to BASIC
COMMAND_CLASS_SWITCH_ALL_V1
COMMAND_CLASS_SCENE_ACTIVATION_V1
COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1
COMMAND_CLASS_NODE_NAMING_V1
COMMAND_CLASS_HAIL_V1
COMMAND_CLASS_ASSOCIATION_V1
COMMAND_CLASS_VERSION_V1

Documentation Links


Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.