| layout | title |
|---|---|
documentation |
LDM32 - ZWave |
{% include base.html %}
This describes the Z-Wave device LDM32, manufactured by Novar Electrical Devices and Systems (EDS) with the thing type UID of novar_ldm32uc_00_000.
The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
The LDM32 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
2 GANG 300W DIMMER MODULE
RF Range up to 75m (open field)
Can control up to 5 devices
Can control either a group or a scene
Pre programmed with HOLIDAY MODE function
Mains powered
STANDARD CARTON QUANTITY: 1
Suitable for use with the following load types and maximum load ratings only.
<td>
2G 300W Dimmer
</td>
<td>
25-300W per channel
</td>
<td>
25-300W per channel
</td>
<td>
25-300W per channel
</td>
<td>
35-300W per channel
</td>
| Load Type |
| GLS |
| Tungsten filament |
| Tungsten halogen |
| 12V ELV Tungsten halogen with wirewound or electronic transformers |
Not suitable with any other load type. Do not use different types of lamps on the same load current.
BS EN 60669-2-1
BS EN 61000-6-1 / 3
ETSI EN 301489-1 / 2
ETSI EN 300220-1/ 2
Mounting Boxes: Flush 35mm
Operating Frequency 868.4 MHz
Select the appropriate 2 Gang Dimmer Fascia for your Dimmer Module
Full Data Sheet is available from here: View Full Data Sheet
To include device into another system press any operation button
To exclude device from a system quickly press Dis/Exc button twice in 1s
The following table summarises the channels available for the LDM32 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Dimmer 1 | switch_dimmer1 | switch_dimmer | DimmableLight | Dimmer |
| Dimmer 2 | switch_dimmer2 | switch_dimmer | DimmableLight | Dimmer |
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer1 channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer2 channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
The device has no configuration parameters defined.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | Linked to BASIC |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_APPLICATION_STATUS_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_MULTI_CHANNEL_V2 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_NODE_NAMING_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_INDICATOR_V1 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V2 | |
| COMMAND_CLASS_MULTI_CMD_V1 |
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_MULTI_CHANNEL_V2 | |
| COMMAND_CLASS_NODE_NAMING_V1 |
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_ALL_V1 | |
| COMMAND_CLASS_MULTI_CHANNEL_V2 | |
| COMMAND_CLASS_NODE_NAMING_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.