| layout | title |
|---|---|
documentation |
NEO Coolcam Roller Shutter - ZWave |
{% include base.html %}
This describes the Z-Wave device NEO Coolcam Roller Shutter, manufactured by Shenzhen Neo Electronics Co., Ltd with the thing type UID of shenzhen_neors_00_000.
The device is in the category of Blinds, defining Roller shutters, window blinds, etc..
The NEO Coolcam Roller Shutter supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
- Brand Name: Coolcam
- Model Number: ZWAVE Curtain Switch
- ZWAVE Plus frequency: 868.4MHZ
- Current output: 10A
- Power consumption: 1.2W
- operation mode: touch-sensitive
- power: 80-250V AC,50-60Hz
- hub: need hub to operate,such as Fibaro,Vera ect
- size: 86*86*34mm
- Set Zwave controller intro inclusion mode
- power on the device
- touch the middle button 3 times within 1s
- the device will be entered into inclusion mode automatically
(All Led lights will be bliked with 1s interval until inclusion successfull)
- Set Z-WaveControll into exclusion mode
- Pwer on the device
- Touch the middle button 3 times within 1s
- the device will be entered into exclusion mode
The following table summarises the channels available for the NEO Coolcam Roller Shutter -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
| Blinds Control | blinds_control | blinds_control | Blinds | Rollershutter |
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Provides start / stop control of blinds.
The blinds_control channel is of type blinds_control and supports the Rollershutter item and is in the Blinds category.
The following table provides a summary of the 5 configuration parameters available in the NEO Coolcam Roller Shutter. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Up/Down Button Swap Enable | Up/Down Button Swap Enable |
| 2 | Motor Rotation Direction Swap Enable | Motor Rotation Direction Swap Enable |
| 3 | Backlight Enable | Backlight Enable |
| 4 | Curtain Moving Indicate Enable | Curtain Moving Indicate Enable |
| 5 | Button Switch | Button Switch |
Up/Down Button Swap Enable
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Disabled |
| 1 | Enabled |
The manufacturer defined default value is 1 (Enabled).
This parameter has the configuration ID config_1_1 and is of type INTEGER.
Motor Rotation Direction Swap Enable
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Disabled |
| 1 | Enabled |
The manufacturer defined default value is 0 (Disabled).
This parameter has the configuration ID config_2_1 and is of type INTEGER.
Backlight Enable
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | LED Disabled |
| 1 | LED ON when Switch is ON |
The manufacturer defined default value is 1 (LED ON when Switch is ON).
This parameter has the configuration ID config_3_1 and is of type INTEGER.
Curtain Moving Indicate Enable
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | LED Disabled |
| 1 | LED Enabled |
The manufacturer defined default value is 1 (LED Enabled).
This parameter has the configuration ID config_4_1 and is of type INTEGER.
Button Switch
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Button Switch Disabled |
| 1 | Button Switch Enabled |
The manufacturer defined default value is 1 (Button Switch Enabled).
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The NEO Coolcam Roller Shutter supports 1 association group.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 5 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V3 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.