| layout | title |
|---|---|
documentation |
YRD210 - ZWave |
{% include base.html %}
This describes the Z-Wave device YRD210, manufactured by ASSA ABLOY with the thing type UID of yale_yrd210_00_000.
The device is in the category of Lock, defining Devices whose primary pupose is locking something.
The YRD210 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.
The Yale Real Living™ Stand-alone Touchscreen Deadbolt Lock combines a robust lockset with a contemporary electronic aesthetic.
Users benefit from an interactive touchscreen that makes day-to-day access effortless, as well as offering voice-guided programming for simple updates to user information in the event of staffing changes or security breaches. Yale Real Living™ is engineered for quick and ea
- Enter Master Code #
- Enter 7 #
If lock is not on the network,
-
Keypad model will flash BLUE;
-
press ‘1#’ to join the network ;
-
lock will beep three times to indicate lock has joined the network successfully.
-
Touch model voice response will say” Network Mode”;
-
lock screen will display ‘1’;
-
select ‘1#’ to join the network .
-
Voice response will say “Joining the wireless network” and then “Completed” when lock has successfully joined the network.
- Enter Master Code #
- Enter 7 #
If lock is on the network,
-
Keypad model will flash RED;
-
press ‘3#’ to leave the network ;
-
lock will beep three times to indicate lock has left the network successfully.
-
Touch model voice response will say” Network Mode”;
-
lock screen will display ‘3’;
-
select ‘3#’ to leave the network .
-
Voice response will say “Exit the wireless network” and then “Completed” when lock has successfully left the network.
The following table summarises the channels available for the YRD210 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Door Lock | lock_door | lock_door | Door | Switch |
| Alarm | alarm_general | alarm_general | Alarm | Switch |
| Alarm Raw | alarm_raw | alarm_raw | String | |
| Battery Level | battery-level | system.battery_level | Battery | Number |
Lock and unlock the door.
The lock_door channel is of type lock_door and supports the Switch item and is in the Door category.
The following state translation is provided for this channel to the Switch item type -:
| Value | Label |
|---|---|
| ON | Locked |
| OFF | Unlocked |
Indicates if an alarm is triggered.
The alarm_general channel is of type alarm_general and supports the Switch item and is in the Alarm category. This is a read only channel so will only be updated following state changes from the device.
The following state translation is provided for this channel to the Switch item type -:
| Value | Label |
|---|---|
| OFF | OK |
| ON | Alarm |
You can use this channel to monitor alarm notifications in rules and process events such as "keypad unlocked" and "user code added". Will require JSONPath processing
Provides alarm parameters as json string.
The alarm_raw channel is of type alarm_raw and supports the String item. This is a read only channel so will only be updated following state changes from the device.
This channel sets, and provides the alarm state as a JSON string. It is designed for use in rules.
Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
The system.battery-level channel is of type system.battery-level and supports the Number item and is in the Battery category.
This channel provides the battery level as a percentage and also reflects the low battery warning state. If the battery state is in low battery warning state, this will read 0%.
The following table provides a summary of the 7 configuration parameters available in the YRD210. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Audio Mode | |
| 2 | Auto relock | |
| 3 | Relock time | Seconds; automatically re-lock after specified time |
| 4 | Wrong Code Entry Limit | The number of invalid code entries before TAMPER Alarm. |
| 5 | Language | |
| 7 | Shutdown Time | Time unit will be inoperable after too many wrong codes |
| 8 | Operating Mode | Operating Mode |
| Lock Timeout | Sets the time after which the door will auto lock |
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | Silent |
| 2 | Low |
| 3 | High |
The manufacturer defined default value is 3 (High).
This parameter has the configuration ID config_1_1 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Off |
| 255 | On |
The manufacturer defined default value is 255 (On).
This parameter has the configuration ID config_2_1 and is of type INTEGER.
Seconds; automatically re-lock after specified time Seconds; after successful code entry and unit unlocks, it will automatically re-lock after specified time Values in the range 5 to 255 may be set.
The manufacturer defined default value is 30.
This parameter has the configuration ID config_3_1 and is of type INTEGER.
The number of invalid code entries before TAMPER Alarm. The number of invalid code entries lock will accept before sending TAMPER Alarm.
When number of wrong code entries is exceeded, lock will disable keypad for the time specified by Shutdown Time parameter. Values in the range 1 to 7 may be set.
The manufacturer defined default value is 5.
This parameter has the configuration ID config_4_1 and is of type INTEGER.
The following option values may be configured -:
| Value | Description |
|---|---|
| 1 | English |
| 2 | Spanish |
| 3 | French |
The manufacturer defined default value is 1 (English).
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Time unit will be inoperable after too many wrong codes Number of seconds unit will be inoperable after number of wrong code entries is exceeded. Values in the range 1 to 255 may be set.
The manufacturer defined default value is 30.
This parameter has the configuration ID config_7_1 and is of type INTEGER.
Operating Mode Normal Mode
Vacation Mode - all user codes disabled
Privacy Mode - all user codes disabled and RF Lock/Unlock disabled The following option values may be configured -:
| Value | Description |
|---|---|
| 0 | Normal |
| 1 | Vacation |
| 2 | Privacy |
The manufacturer defined default value is 0 (Normal).
This parameter has the configuration ID config_8_1 and is of type INTEGER.
Sets the time after which the door will auto lock.
This parameter has the configuration ID doorlock_timeout and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The YRD210 supports 1 association group.
Association group 1 supports 4 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_DOOR_LOCK_V1 | |
| COMMAND_CLASS_USER_CODE_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_ALARM_V1 | Linked to BASIC |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_PROTECTION_V1 | |
| COMMAND_CLASS_LOCK_V1 | |
| COMMAND_CLASS_BATTERY_V1 | |
| COMMAND_CLASS_ASSOCIATION_V1 | |
| COMMAND_CLASS_VERSION_V1 | |
| COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.