diff --git a/openapi/generated_openapi/zz_generated.openapi.go b/openapi/generated_openapi/zz_generated.openapi.go index 8a1fcfdf513..3281c2944b9 100644 --- a/openapi/generated_openapi/zz_generated.openapi.go +++ b/openapi/generated_openapi/zz_generated.openapi.go @@ -50280,7 +50280,7 @@ func schema_openshift_api_operator_v1_IPv4GatewayConfig(ref common.ReferenceCall Properties: map[string]spec.Schema{ "internalMasqueradeSubnet": { SchemaProps: spec.SchemaProps{ - Description: "internalMasqueradeSubnet contains the masquerade addresses in IPV4 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 169.254.169.0/29 The value must be in proper IPV4 CIDR format", + Description: "internalMasqueradeSubnet contains the masquerade addresses in IPV4 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format", Type: []string{"string"}, Format: "", }, @@ -50299,14 +50299,14 @@ func schema_openshift_api_operator_v1_IPv4OVNKubernetesConfig(ref common.Referen Properties: map[string]spec.Schema{ "internalTransitSwitchSubnet": { SchemaProps: spec.SchemaProps{ - Description: "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", + Description: "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", Type: []string{"string"}, Format: "", }, }, "internalJoinSubnet": { SchemaProps: spec.SchemaProps{ - Description: "internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", + Description: "internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", Type: []string{"string"}, Format: "", }, @@ -50326,7 +50326,7 @@ func schema_openshift_api_operator_v1_IPv6GatewayConfig(ref common.ReferenceCall Properties: map[string]spec.Schema{ "internalMasqueradeSubnet": { SchemaProps: spec.SchemaProps{ - Description: "internalMasqueradeSubnet contains the masquerade addresses in IPV6 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is fd69::/125 Note that IPV6 dual addresses are not permitted", + Description: "internalMasqueradeSubnet contains the masquerade addresses in IPV6 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted", Type: []string{"string"}, Format: "", }, @@ -50345,14 +50345,14 @@ func schema_openshift_api_operator_v1_IPv6OVNKubernetesConfig(ref common.Referen Properties: map[string]spec.Schema{ "internalTransitSwitchSubnet": { SchemaProps: spec.SchemaProps{ - Description: "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster The current default subnet is fd97::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", + Description: "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster The current default subnet is fd97::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", Type: []string{"string"}, Format: "", }, }, "internalJoinSubnet": { SchemaProps: spec.SchemaProps{ - Description: "internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", + Description: "internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", Type: []string{"string"}, Format: "", }, @@ -54844,14 +54844,14 @@ func schema_openshift_api_operator_v1_OVNKubernetesConfig(ref common.ReferenceCa }, "v4InternalSubnet": { SchemaProps: spec.SchemaProps{ - Description: "v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. Default is 100.64.0.0/16", + Description: "v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. Default is 100.64.0.0/16", Type: []string{"string"}, Format: "", }, }, "v6InternalSubnet": { SchemaProps: spec.SchemaProps{ - Description: "v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. Default is fd98::/64", + Description: "v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. Default is fd98::/64", Type: []string{"string"}, Format: "", }, diff --git a/openapi/openapi.json b/openapi/openapi.json index a0843b68a47..5b1b9dbfee8 100644 --- a/openapi/openapi.json +++ b/openapi/openapi.json @@ -29268,7 +29268,7 @@ "type": "object", "properties": { "internalMasqueradeSubnet": { - "description": "internalMasqueradeSubnet contains the masquerade addresses in IPV4 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 169.254.169.0/29 The value must be in proper IPV4 CIDR format", + "description": "internalMasqueradeSubnet contains the masquerade addresses in IPV4 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format", "type": "string" } } @@ -29277,11 +29277,11 @@ "type": "object", "properties": { "internalJoinSubnet": { - "description": "internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", + "description": "internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", "type": "string" }, "internalTransitSwitchSubnet": { - "description": "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", + "description": "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", "type": "string" } } @@ -29291,7 +29291,7 @@ "type": "object", "properties": { "internalMasqueradeSubnet": { - "description": "internalMasqueradeSubnet contains the masquerade addresses in IPV6 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is fd69::/125 Note that IPV6 dual addresses are not permitted", + "description": "internalMasqueradeSubnet contains the masquerade addresses in IPV6 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted", "type": "string" } } @@ -29300,11 +29300,11 @@ "type": "object", "properties": { "internalJoinSubnet": { - "description": "internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", + "description": "internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", "type": "string" }, "internalTransitSwitchSubnet": { - "description": "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster The current default subnet is fd97::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", + "description": "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster The current default subnet is fd97::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", "type": "string" } } @@ -32003,11 +32003,11 @@ "type": "string" }, "v4InternalSubnet": { - "description": "v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. Default is 100.64.0.0/16", + "description": "v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. Default is 100.64.0.0/16", "type": "string" }, "v6InternalSubnet": { - "description": "v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. Default is fd98::/64", + "description": "v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. Default is fd98::/64", "type": "string" } } diff --git a/operator/v1/types_network.go b/operator/v1/types_network.go index 713939ddbb9..c146cdb613c 100644 --- a/operator/v1/types_network.go +++ b/operator/v1/types_network.go @@ -431,16 +431,14 @@ type OVNKubernetesConfig struct { // v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the // default one is being already used by something else. It must not overlap with // any other subnet being used by OpenShift or by the node network. The size of the - // subnet must be larger than the number of nodes. The value cannot be changed - // after installation. + // subnet must be larger than the number of nodes. // Default is 100.64.0.0/16 // +optional V4InternalSubnet string `json:"v4InternalSubnet,omitempty"` // v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the // default one is being already used by something else. It must not overlap with // any other subnet being used by OpenShift or by the node network. The size of the - // subnet must be larger than the number of nodes. The value cannot be changed - // after installation. + // subnet must be larger than the number of nodes. // Default is fd98::/64 // +optional V6InternalSubnet string `json:"v6InternalSubnet,omitempty"` @@ -478,7 +476,6 @@ type IPv4OVNKubernetesConfig struct { // architecture that connects the cluster routers on each node together to enable // east west traffic. The subnet chosen should not overlap with other networks // specified for OVN-Kubernetes as well as other networks used on the host. - // The value cannot be changed after installation. // When ommitted, this means no opinion and the platform is left to choose a reasonable // default which is subject to change over time. // The current default subnet is 100.88.0.0/16 @@ -493,8 +490,7 @@ type IPv4OVNKubernetesConfig struct { // internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the // default one is being already used by something else. It must not overlap with // any other subnet being used by OpenShift or by the node network. The size of the - // subnet must be larger than the number of nodes. The value cannot be changed - // after installation. + // subnet must be larger than the number of nodes. // The current default value is 100.64.0.0/16 // The subnet must be large enough to accomadate one IP per node in your cluster // The value must be in proper IPV4 CIDR format @@ -512,7 +508,6 @@ type IPv6OVNKubernetesConfig struct { // architecture that connects the cluster routers on each node together to enable // east west traffic. The subnet chosen should not overlap with other networks // specified for OVN-Kubernetes as well as other networks used on the host. - // The value cannot be changed after installation. // When ommitted, this means no opinion and the platform is left to choose a reasonable // default which is subject to change over time. // The subnet must be large enough to accomadate one IP per node in your cluster @@ -527,8 +522,7 @@ type IPv6OVNKubernetesConfig struct { // internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the // default one is being already used by something else. It must not overlap with // any other subnet being used by OpenShift or by the node network. The size of the - // subnet must be larger than the number of nodes. The value cannot be changed - // after installation. + // subnet must be larger than the number of nodes. // The subnet must be large enough to accomadate one IP per node in your cluster // The current default value is fd98::/64 // The value must be in proper IPV6 CIDR format @@ -646,7 +640,7 @@ type IPv4GatewayConfig struct { // OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must // be large enough to accommodate 6 IPs (maximum prefix length /29). // When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - // The current default subnet is 169.254.169.0/29 + // The current default subnet is 169.254.0.0/17 // The value must be in proper IPV4 CIDR format // +kubebuilder:validation:MaxLength=18 // +kubebuilder:validation:XValidation:rule="isCIDR(self) && cidr(self).ip().family() == 4",message="Subnet must be in valid IPV4 CIDR format" @@ -665,7 +659,7 @@ type IPv6GatewayConfig struct { // OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must // be large enough to accommodate 6 IPs (maximum prefix length /125). // When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - // The current default subnet is fd69::/125 + // The current default subnet is fd69::/112 // Note that IPV6 dual addresses are not permitted // +kubebuilder:validation:XValidation:rule="isCIDR(self) && cidr(self).ip().family() == 6",message="Subnet must be in valid IPV6 CIDR format" // +kubebuilder:validation:XValidation:rule="isCIDR(self) && cidr(self).prefixLength() <= 125",message="subnet must be in the range /0 to /125 inclusive" diff --git a/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-CustomNoUpgrade.crd.yaml b/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-CustomNoUpgrade.crd.yaml index 8d40d869abf..ec5f98eb296 100644 --- a/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-CustomNoUpgrade.crd.yaml +++ b/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-CustomNoUpgrade.crd.yaml @@ -317,7 +317,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is 169.254.169.0/29 + The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format maxLength: 18 type: string @@ -346,7 +346,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is fd69::/125 + The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted type: string x-kubernetes-validations: @@ -467,8 +467,7 @@ spec: internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format @@ -488,7 +487,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 @@ -515,8 +513,7 @@ spec: internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format @@ -535,7 +532,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster @@ -627,8 +623,7 @@ spec: v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is 100.64.0.0/16 type: string v6InternalSubnet: @@ -636,8 +631,7 @@ spec: v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is fd98::/64 type: string type: object diff --git a/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-Default.crd.yaml b/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-Default.crd.yaml index e900bb11955..d457ff3ff1e 100644 --- a/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-Default.crd.yaml +++ b/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-Default.crd.yaml @@ -317,7 +317,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is 169.254.169.0/29 + The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format maxLength: 18 type: string @@ -346,7 +346,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is fd69::/125 + The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted type: string x-kubernetes-validations: @@ -467,8 +467,7 @@ spec: internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format @@ -488,7 +487,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 @@ -515,8 +513,7 @@ spec: internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format @@ -535,7 +532,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster @@ -611,8 +607,7 @@ spec: v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is 100.64.0.0/16 type: string v6InternalSubnet: @@ -620,8 +615,7 @@ spec: v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is fd98::/64 type: string type: object diff --git a/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-DevPreviewNoUpgrade.crd.yaml b/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-DevPreviewNoUpgrade.crd.yaml index 89b8f8b58d3..60ec7d7a301 100644 --- a/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-DevPreviewNoUpgrade.crd.yaml +++ b/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-DevPreviewNoUpgrade.crd.yaml @@ -317,7 +317,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is 169.254.169.0/29 + The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format maxLength: 18 type: string @@ -346,7 +346,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is fd69::/125 + The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted type: string x-kubernetes-validations: @@ -467,8 +467,7 @@ spec: internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format @@ -488,7 +487,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 @@ -515,8 +513,7 @@ spec: internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format @@ -535,7 +532,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster @@ -627,8 +623,7 @@ spec: v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is 100.64.0.0/16 type: string v6InternalSubnet: @@ -636,8 +631,7 @@ spec: v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is fd98::/64 type: string type: object diff --git a/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-TechPreviewNoUpgrade.crd.yaml b/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-TechPreviewNoUpgrade.crd.yaml index 5c5c0d708ad..9853e76886f 100644 --- a/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-TechPreviewNoUpgrade.crd.yaml +++ b/operator/v1/zz_generated.crd-manifests/0000_70_network_01_networks-TechPreviewNoUpgrade.crd.yaml @@ -317,7 +317,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is 169.254.169.0/29 + The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format maxLength: 18 type: string @@ -346,7 +346,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is fd69::/125 + The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted type: string x-kubernetes-validations: @@ -467,8 +467,7 @@ spec: internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format @@ -488,7 +487,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 @@ -515,8 +513,7 @@ spec: internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format @@ -535,7 +532,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster @@ -627,8 +623,7 @@ spec: v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is 100.64.0.0/16 type: string v6InternalSubnet: @@ -636,8 +631,7 @@ spec: v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is fd98::/64 type: string type: object diff --git a/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/AAA_ungated.yaml b/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/AAA_ungated.yaml index 76ba6e58ccf..3291edc498f 100644 --- a/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/AAA_ungated.yaml +++ b/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/AAA_ungated.yaml @@ -284,7 +284,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is 169.254.169.0/29 + The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format maxLength: 18 type: string @@ -313,7 +313,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is fd69::/125 + The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted type: string x-kubernetes-validations: @@ -434,8 +434,7 @@ spec: internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format @@ -455,7 +454,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 @@ -482,8 +480,7 @@ spec: internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format @@ -502,7 +499,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster @@ -578,8 +574,7 @@ spec: v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is 100.64.0.0/16 type: string v6InternalSubnet: @@ -587,8 +582,7 @@ spec: v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is fd98::/64 type: string type: object diff --git a/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/AdditionalRoutingCapabilities.yaml b/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/AdditionalRoutingCapabilities.yaml index 4515a9da1bb..5f8c860bd90 100644 --- a/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/AdditionalRoutingCapabilities.yaml +++ b/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/AdditionalRoutingCapabilities.yaml @@ -317,7 +317,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is 169.254.169.0/29 + The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format maxLength: 18 type: string @@ -346,7 +346,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is fd69::/125 + The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted type: string x-kubernetes-validations: @@ -467,8 +467,7 @@ spec: internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format @@ -488,7 +487,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 @@ -515,8 +513,7 @@ spec: internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format @@ -535,7 +532,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster @@ -611,8 +607,7 @@ spec: v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is 100.64.0.0/16 type: string v6InternalSubnet: @@ -620,8 +615,7 @@ spec: v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is fd98::/64 type: string type: object diff --git a/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/NetworkLiveMigration.yaml b/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/NetworkLiveMigration.yaml index 120808e8695..0f758c2a069 100644 --- a/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/NetworkLiveMigration.yaml +++ b/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/NetworkLiveMigration.yaml @@ -284,7 +284,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is 169.254.169.0/29 + The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format maxLength: 18 type: string @@ -313,7 +313,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is fd69::/125 + The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted type: string x-kubernetes-validations: @@ -434,8 +434,7 @@ spec: internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format @@ -455,7 +454,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 @@ -482,8 +480,7 @@ spec: internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format @@ -502,7 +499,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster @@ -578,8 +574,7 @@ spec: v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is 100.64.0.0/16 type: string v6InternalSubnet: @@ -587,8 +582,7 @@ spec: v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is fd98::/64 type: string type: object diff --git a/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/RouteAdvertisements.yaml b/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/RouteAdvertisements.yaml index bfbde0360a5..1b90fda48b0 100644 --- a/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/RouteAdvertisements.yaml +++ b/operator/v1/zz_generated.featuregated-crd-manifests/networks.operator.openshift.io/RouteAdvertisements.yaml @@ -284,7 +284,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is 169.254.169.0/29 + The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format maxLength: 18 type: string @@ -313,7 +313,7 @@ spec: OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. - The current default subnet is fd69::/125 + The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted type: string x-kubernetes-validations: @@ -434,8 +434,7 @@ spec: internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format @@ -455,7 +454,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 @@ -482,8 +480,7 @@ spec: internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format @@ -502,7 +499,6 @@ spec: architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. - The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster @@ -594,8 +590,7 @@ spec: v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is 100.64.0.0/16 type: string v6InternalSubnet: @@ -603,8 +598,7 @@ spec: v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the - subnet must be larger than the number of nodes. The value cannot be changed - after installation. + subnet must be larger than the number of nodes. Default is fd98::/64 type: string type: object diff --git a/operator/v1/zz_generated.swagger_doc_generated.go b/operator/v1/zz_generated.swagger_doc_generated.go index a0fa4fe4756..2b1289694cd 100644 --- a/operator/v1/zz_generated.swagger_doc_generated.go +++ b/operator/v1/zz_generated.swagger_doc_generated.go @@ -1712,7 +1712,7 @@ func (IPsecFullModeConfig) SwaggerDoc() map[string]string { var map_IPv4GatewayConfig = map[string]string{ "": "IPV4GatewayConfig holds the configuration paramaters for IPV4 connections in the GatewayConfig for OVN-Kubernetes", - "internalMasqueradeSubnet": "internalMasqueradeSubnet contains the masquerade addresses in IPV4 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 169.254.169.0/29 The value must be in proper IPV4 CIDR format", + "internalMasqueradeSubnet": "internalMasqueradeSubnet contains the masquerade addresses in IPV4 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /29). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 169.254.0.0/17 The value must be in proper IPV4 CIDR format", } func (IPv4GatewayConfig) SwaggerDoc() map[string]string { @@ -1720,8 +1720,8 @@ func (IPv4GatewayConfig) SwaggerDoc() map[string]string { } var map_IPv4OVNKubernetesConfig = map[string]string{ - "internalTransitSwitchSubnet": "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", - "internalJoinSubnet": "internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", + "internalTransitSwitchSubnet": "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is 100.88.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", + "internalJoinSubnet": "internalJoinSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The current default value is 100.64.0.0/16 The subnet must be large enough to accomadate one IP per node in your cluster The value must be in proper IPV4 CIDR format", } func (IPv4OVNKubernetesConfig) SwaggerDoc() map[string]string { @@ -1730,7 +1730,7 @@ func (IPv4OVNKubernetesConfig) SwaggerDoc() map[string]string { var map_IPv6GatewayConfig = map[string]string{ "": "IPV6GatewayConfig holds the configuration paramaters for IPV6 connections in the GatewayConfig for OVN-Kubernetes", - "internalMasqueradeSubnet": "internalMasqueradeSubnet contains the masquerade addresses in IPV6 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is fd69::/125 Note that IPV6 dual addresses are not permitted", + "internalMasqueradeSubnet": "internalMasqueradeSubnet contains the masquerade addresses in IPV6 CIDR format used internally by ovn-kubernetes to enable host to service traffic. Each host in the cluster is configured with these addresses, as well as the shared gateway bridge interface. The values can be changed after installation. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. Additionally the subnet must be large enough to accommodate 6 IPs (maximum prefix length /125). When omitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The current default subnet is fd69::/112 Note that IPV6 dual addresses are not permitted", } func (IPv6GatewayConfig) SwaggerDoc() map[string]string { @@ -1738,8 +1738,8 @@ func (IPv6GatewayConfig) SwaggerDoc() map[string]string { } var map_IPv6OVNKubernetesConfig = map[string]string{ - "internalTransitSwitchSubnet": "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. The value cannot be changed after installation. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster The current default subnet is fd97::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", - "internalJoinSubnet": "internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", + "internalTransitSwitchSubnet": "internalTransitSwitchSubnet is a v4 subnet in IPV4 CIDR format used internally by OVN-Kubernetes for the distributed transit switch in the OVN Interconnect architecture that connects the cluster routers on each node together to enable east west traffic. The subnet chosen should not overlap with other networks specified for OVN-Kubernetes as well as other networks used on the host. When ommitted, this means no opinion and the platform is left to choose a reasonable default which is subject to change over time. The subnet must be large enough to accomadate one IP per node in your cluster The current default subnet is fd97::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", + "internalJoinSubnet": "internalJoinSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The subnet must be large enough to accomadate one IP per node in your cluster The current default value is fd98::/64 The value must be in proper IPV6 CIDR format Note that IPV6 dual addresses are not permitted", } func (IPv6OVNKubernetesConfig) SwaggerDoc() map[string]string { @@ -1840,8 +1840,8 @@ var map_OVNKubernetesConfig = map[string]string{ "ipsecConfig": "ipsecConfig enables and configures IPsec for pods on the pod network within the cluster.", "policyAuditConfig": "policyAuditConfig is the configuration for network policy audit events. If unset, reported defaults are used.", "gatewayConfig": "gatewayConfig holds the configuration for node gateway options.", - "v4InternalSubnet": "v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. Default is 100.64.0.0/16", - "v6InternalSubnet": "v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. The value cannot be changed after installation. Default is fd98::/64", + "v4InternalSubnet": "v4InternalSubnet is a v4 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. Default is 100.64.0.0/16", + "v6InternalSubnet": "v6InternalSubnet is a v6 subnet used internally by ovn-kubernetes in case the default one is being already used by something else. It must not overlap with any other subnet being used by OpenShift or by the node network. The size of the subnet must be larger than the number of nodes. Default is fd98::/64", "egressIPConfig": "egressIPConfig holds the configuration for EgressIP options.", "ipv4": "ipv4 allows users to configure IP settings for IPv4 connections. When ommitted, this means no opinions and the default configuration is used. Check individual fields within ipv4 for details of default values.", "ipv6": "ipv6 allows users to configure IP settings for IPv6 connections. When ommitted, this means no opinions and the default configuration is used. Check individual fields within ipv4 for details of default values.",