Boardoza
Change the repository type filter
All
Repositories list
42 repositories
- I2C and SPI interface breakout board for ADXL345 accelerometer
- Compact vibration motor breakout board with integrated motor supporting 3.3V/5V operation for haptic feedback applications.
- High-efficiency buck-boost converter evaluation board using TI TPS63020, supporting 1.8V–5.5V input and multiple selectable output voltages up to 5V.
- Dual-output low-dropout voltage regulator breakout board based on TI TPS70302, providing 3.3V fixed and selectable 1.2V/1.8V outputs for efficient split-supply power systems.
- Dual-channel optically isolated level shifter board using Sharp PC817C for safe voltage conversion between 3.3V–12V systems.
- Four-channel optically isolated level shifter board using Sharp PC817C for safe voltage conversion between 3.3V–12V systems.
- A 3.3V RS-485 transceiver breakout board with automatic flow control, designed for long-distance and noise-resistant serial communication.
- A 5V RS-485 transceiver breakout board using the HTC Korea MAX485 chip for reliable long-distance communication.
- High-precision 3.3V low-dropout voltage regulator breakout board using onsemi NCP3334A, providing efficient and stable power up to 500 mA.
- High-precision 5V low-dropout voltage regulator breakout board using onsemi NCP3334A, ideal for powering microcontrollers and embedded electronics up to 500 mA.
- Low-power 433 MHz OOK RF receiver module designed for wireless DIY projects.
- A breakout board built around the FT810 graphics engine for maker-friendly display, touch, and audio HMI projects.
- FT800-driven TFT display controller breakout board supporting graphics, audio, and touch interfaces via SPI for creating advanced embedded HMIs.
- Low-power Bluetooth 5.2 module with UART interface based on Raytac MDBT50Q (nRF52833 SoC).
- LoRa wireless communication module with built-in Cortex-M4 MCU, multi-band support, and UART interface.
- Compact SPI-based microSD breakout board for 3.3V and 5V systems.
- Compact single-cell Li-Ion/Li-Po battery charger module based on Microchip MCP73831 with USB Type-C input and adjustable charge current.
- High-power H-bridge motor driver breakout board based on STMicroelectronics VNH5019A-E with integrated encoder interface and thermal heatsink design.
- Voice IC development board with I²C interface and 16 capacitive touch channels for voice-assisted applications.
- A compact ESP8266-based Wi-Fi module supporting 802.11n (2.4 GHz), UART communication, Station/AP modes, and dual virtual Wi-Fi interfaces for IoT and embedded applications.
- A multi-mode GNSS receiver breakout board based on the GP-02 SoC supporting BDS, GPS, and GLONASS.
- BNO055 Absolute Orientation Sensor with 9-Axis Sensor Fusion for Real-Time Motion Tracking Breakout Board.
- A Wi-Fi and Bluetooth development board based on the ESP32-S3-WROOM-1-N4R2 module.
- MQ4 Methane (CNG) Gas Sensor Board Module
- TPiS1385 IR Thermopile Sensor for Contactless Temperature Measurement Breakout Board.
- 5V voltage regulator board for AMS1117
- 3.3V LDO voltage regulator with 1A output and built-in protection.
- A digital temperature sensor breakout board using the NXP LM75ADP with I²C interface.
- A dual-mode Wi-Fi and Bluetooth 5.2 wireless breakout board based on the Quectel FC41D chip.