OpenCCU 3.85.7.20251129

[jens-maus]

This is release 3.85.7.20251129 of OpenCCU which is a maintenance release with the following bugfixes and feature changes:

_{Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag}

Note

🇩🇪 – Bitte beachten, das die Umstellung von "RaspberryMatic" zu "OpenCCU" nicht via automatischem Update funktioniert. D.h. bei einem bereits existierenden RaspberryMatic muss die Umstellung auf OpenCCU via einmaligem manuellem Hochladen der Updatedatei unter Einstellungen → Systemsteuerung → Zentralen-Wartung → Datei auswählen... erfolgen. Mehr Infos dazu im Migration von RaspberryMatic Abschnitt der Dokumentation.

🇺🇸 – Please note that the migration from “RaspberryMatic” to “OpenCCU” cannot be performed via the automatic update mechanism. This means that for an existing RaspberryMatic installation, the switch to OpenCCU must be done manually once by uploading the update file under Settings → Control Panel → CCU maintenance → Choose file.... You can find more infos in the Migration from RaspberryMatic section of the documentation.

🚧 Changes:

_{For all changes, see the full commit log.}

CCU/HomeMatic service changes:

• 58c15a072 - update OCCU to 3.85.7-1 (update OCCU to 3.85.7-1 and adapted our WebUI patches accordingly. #3347) integrating full compatibility to the CCU3 3.85.7 firmware which comes with the following changes:
  • HmIP-eTVR-F – Fixed an error when changing the color of the system button.
  • HmIP-WSM – Fixed an error in the control weekly program.
  • HmIP-FALMOT – Fixed an issue that could cause the status LED to blink yellow even though no service message was shown in the WebUI.
  • ELV-SH-KRCO has been renamed to ELV-SH-KRC.
• 02bfe86b0 - update Mediola NEOserver to 2.19.0 (update Mediola NEOserver to 2.19.0 #3350)

WebUI changes:

• 0582e015f - fix potential curl redirect issue in downloadFirmware.tcl. (fix potential curl redirect issue in downloadFirmware.tcl. #3286)

Operating system changes:

• e22f77fda - bump tailscale to latest 1.90.9 (fixes Tailscale - known security vulnerability in 1.88.3 #3362) (bump tailscale to latest 1.90.9 (fixes #3362) #3363)
• 472087f14 - bump upstream kernel to 6.12.59 (bump upstream kernel to 6.12.59 #3359)
• b38c25dd4 - update rpi-eeprom version to latest pieeprom-2025-11-21.bin (update rpi-eeprom version to latest pieeprom-2025-11-21.bin #3352)
• 901104492 - update QEmu Guest Agent to latest 10.1.2 (update QEmu Guest Agent to latest 10.1.2 #3351)
• da0492631 - update buildroot to 2025.08.2 (update buildroot to 2025.08.2 #3349)
• ed5c6212f - update java azul to latest 11.84.17-ca-jre11.0.29 (update java azul to latest 11.84.17-ca-jre11.0.29 #3312)
• 76c45565a - enable Pressure Stall Information (PSI) (enable Pressure Stall Information (PSI) #3310)
• 9ea7e2394 - disable UAS on RPI for JMicron JMS583Gen 2 to PCIe Gen3x2 Bridge (disable UAS on RPI for JMicron JMS583Gen 2 to PCIe Gen3x2 Bridge #3301)
• cf12a0816 - fix home-assistant config.yaml for openccu release (fix home-assistant config.yaml for openccu release #3283)

👪 Contributors (alphabetically):

• @jens-maus

📝 Support:

For support on installation and help please visit the following web pages:

OpenCCU - Documentation 🇺🇸
OpenCCU - Discussions 🇺🇸
OpenCCU - Dokumentation 🇩🇪
OpenCCU - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

• RaspberryPi5 Model B – (installation):
  _{📦 OpenCCU-3.85.7.20251129-rpi5.zip
  SHA256: 8823eeec07d8e6443cb31ceb1d861590bd11e3aeed5a878e00f0b78ae714809a}

• RaspberryPi4 Model B, RaspberryPi Compute Module 4, RaspberryPi 400 – (installation):
  _{📦 OpenCCU-3.85.7.20251129-rpi4.zip
  SHA256: 73a8c9cd8a7483e41ed2da34cb6809f54bd045ca5bba20195e096113a86a2dd4}

• CCU3, ELV-Charly, RaspberryPi3 Model B+, RaspberryPi3 Model B, RaspberryPi3 Model A+, RaspberryPi Compute Module 3, RaspberryPi Compute Module 3 lite, RaspberryPi Zero 2 W – (installation):
  _{📦 OpenCCU-3.85.7.20251129-rpi3.zip
  SHA256: 85f7646d6760b5df9f0f6a6ec2b08608fb28751ea07f80aa3f81783b4fff76b7
  📦 OpenCCU-3.85.7.20251129-ccu3.tgz (only for initial CCU3 Firmware -> OpenCCU Upgrade)
  SHA256: b7f13247d601d2e11ff0a84b1ce08b7d4a2b61d7944bb4a2058a461cc13a1355}

• RaspberryPi2 Model B – (installation):
  _{📦 OpenCCU-3.85.7.20251129-rpi2.zip
  SHA256: 9418d530893fe3a52b53a4db0ad3f08590e808288da39d74849b8189d1dfd098}

• RaspberryPi Zero W, RaspberryPi Zero, RaspberryPi Compute Module 1, RaspberryPi1 (A+/B+) – (installation):
  _{📦 OpenCCU-3.85.7.20251129-rpi0.zip
  SHA256: 05c547a3f499f5dac16aec8e18c84288d47cd39118b991bdbb118dce616b7d3c}

• TinkerBoard S, TinkerBoard – (installation):
  _{📦 OpenCCU-3.85.7.20251129-tinkerboard.zip
  SHA256: 3850278c5e19e90f48590be65ae06e15fb1160ce26eba24bc1ec414e6b02a211}

• ODROID-N2/N2+/C4/C2 – (installation):
  _{📦 OpenCCU-3.85.7.20251129-odroid-n2.zip
  SHA256: 675f8ce41e25c04b91b9b78547ddb76520f685ccf2f8b74affa3ed4dbc8afcb0
  📦 OpenCCU-3.85.7.20251129-odroid-c4.zip
  SHA256: 72257911a2a005610d85a7805f5393fd6c863667ccfc3c842b940343343da2da
  📦 OpenCCU-3.85.7.20251129-odroid-c2.zip
  SHA256: a8c107f27cc7260bdd70c16e486c8648cac2a50b4531987fb0c20e86ceb98146}

• Generic-x86_64 – (installation):
  _{📦 OpenCCU-3.85.7.20251129-generic-x86_64.zip
  SHA256: 8761bc69be0664d87d9df266d9e0201dce7f9fb0a47a654962a8eb83f40f1bfa}

• Open Virtual Appliance (OVA) – (ProxmoxVE, VirtualBox, ESXi, Synology, QNAP, Workstation Player, QEmu, UNRAID, HyperV):
  _{📦 OpenCCU-3.85.7.20251129-ova.zip
  SHA256: 83d16e7afdd91f9d5078a3e0ace4381d58932f46f792d90ff1246fc75e1918f8
  📦 OpenCCU-3.85.7.20251129.ova (only for initial OVA installation)
  SHA256: 431991e6951bc4c0364a4597a67752a6f535131e3660124fbbfc6c8301f58ebd}

• Docker / Open Container Initiative (OCI) – virtual appliance (installation):
  _{📦 OpenCCU-3.85.7.20251129-oci_amd64.tgz (amd64/x86_64)
  SHA256: 8af60b7b37d71b038bd63cbf6f508fb72ad4a26bc67eb588452d4363410f7311
  📦 OpenCCU-3.85.7.20251129-oci_arm64.tgz (arm64/aarch64)
  SHA256: 5d64f90a646779c00b10d7f37f83188d75d096d2636089daf1ab8efd7a9ce93f
  📦 OpenCCU-3.85.7.20251129-oci_arm.tgz (arm/armhf)
  SHA256: 36c3f82c23b4650d6e7ccead26ff013c1d91a308a4085e35e627784031c5c104}

• LXC Container – virtual appliance (installation):
  _{📦 OpenCCU-3.85.7.20251129-lxc_amd64.tar.xz (amd64/x86_64)
  SHA256: 63340b0ab9ae2fffa5495f100aba71aa6ce68ab9a9e8229282daa96591938d4d
  📦 OpenCCU-3.85.7.20251129-lxc_arm64.tar.xz (arm64/aarch64)
  SHA256: 8462530d73c22b3e1048e683ea00d84c1bf5bc1cdff64e67613d15393de61ac6
  📦 OpenCCU-3.85.7.20251129-lxc_arm.tar.xz (arm/armhf)
  SHA256: 2cb41343eee044dfd2bed703628710b50142e8534eb633a80b8de734b3068299}

• Generic-aarch64 Appliance – (ProxmoxVE):
  _{📦 OpenCCU-3.85.7.20251129-generic-aarch64.zip
  SHA256: c6f69b69ce9cd3727590388de6ef69f481015b28bd123219dd151c0dab6e344b}

• Kubernetes / K8s – virtual appliance:
  _{see install documentation}

• Home Assistant Add-on – virtual appliance:
  _{see install documentation}

---

This discussion was created from the release OpenCCU 3.85.7.20251129.