NUC 8I7HVK BIOS 70 #1119
-
|
Since the BIOS was updated, I can no longer boot. I always run into Err 0xE RT.GV wake-failure. Windows still runs fine..... |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
Update: I am now running Sequoia 15.7.1 on NUC8i7HVK with BIOS 70 No way to boot with the EFI I used before the BIOS update. Here is what I did: I built the installer from GoodBests latest KextUpdate Branch and installed it to a fresh Sequoia Installer. Unfortunately this did not work neither. I then used OCAT to sync the EFI generated by the Installer to the latest version of OC and all kexts. I had to fix one issue in the plist. OCAT did not like the empyt output setting in UEFI. I put Auto there et voila. I am not sure that I have Boot Security enabled that way, but at least I could boot and even update to Sequoia 15.7.1 that way. |
Beta Was this translation helpful? Give feedback.
Update: I am now running Sequoia 15.7.1 on NUC8i7HVK with BIOS 70
No way to boot with the EFI I used before the BIOS update. Here is what I did:
I built the installer from GoodBests latest KextUpdate Branch and installed it to a fresh Sequoia Installer. Unfortunately this did not work neither. I then used OCAT to sync the EFI generated by the Installer to the latest version of OC and all kexts. I had to fix one issue in the plist. OCAT did not like the empyt output setting in UEFI. I put Auto there et voila.
I am not sure that I have Boot Security enabled that way, but at least I could boot and even update to Sequoia 15.7.1 that way.