Automatic switch-off of the pump switch after the program ends

[metamorph81]

Hi guys,
is it possible to configure the pump switch to automatically turn off when the program is finished? Unfortunately, I couldn't find anything about this.
Thanks, Olaf

[petergridge]

Hi Olaf,

The pump should turn off automatically 5 seconds after the valve/switch has turned off, this allows time for another zone to start without cycling the pump. The pump will also turn off during an eco/wait period. The pump monitors the zones switches that have the pump assigned and turns on/off as required.

Pete

[metamorph81]

Hi Pete,Thanks for your quick answer.I will check this later again, because it doesn’t work yesterday after the installation and configuration of the integration.All the bestOlaf Send by EifonOlaf VorbergDorfstraße 16a 39326 Samswegen OT Bleichemobil: + 49 176 52348889On 15. Apr 2025, at 11:33, Peter ***@***.***> wrote: Hi Olaf, The pump should turn off automatically 5 seconds after the valve/switch has turned off, this allows time for another zone to start without cycling the pump. The pump will also turn off during an eco/wait period. The pump monitors the zones switches that have the pump assigned and turns on/off as required. Pete —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>