terraform.tfvars.example

#################################
# ha-sap-terraform-deployments project configuration file
# Find all the available variables and definitions in the variables.tf file
#################################

# Region where to deploy the configuration
az_region = "westeurope"

# Use an already existing resource group
#resource_group_name = "my-resource-group"

# Use an already existing virtual network
#vnet_name = "my-vnet"

# Use an already existing subnet in this virtual network
#subnet_name = "my-subnet"

# vnet address range in CIDR notation
# Only used if the vnet is created by terraform or the user doesn't have read permissions in this
# resource. To use the current vnet address range set the value to an empty string
# To define custom ranges
#vnet_address_range = "10.74.0.0/16"
#subnet_address_range = "10.74.1.0/24"
# Or to use already existing address ranges
#vnet_address_range = ""
#subnet_address_range = ""

#################################
# General configuration variables
#################################

# Deployment name. This variable is used to complement the name of multiple infrastructure resources adding the string as suffix
# If it is not used, the terraform workspace string is used
# The name must be unique among different deployments
# deployment_name = "mydeployment"

# Admin user for the created machines
admin_user = "cloudadmin"

# If BYOS images are used in the deployment, SCC registration code is required. Set `reg_code` and `reg_email` variables below
# By default, all the images are PAYG, so these next parameters are not needed
#reg_code = "<<REG_CODE>>"
#reg_email = "<<your email>>"

# To add additional modules from SCC. None of them is needed by default
#reg_additional_modules = {
#    "sle-module-adv-systems-management/12/x86_64" = ""
#    "sle-module-containers/12/x86_64" = ""
#    "sle-ha-geo/12.4/x86_64" = "<<REG_CODE>>"
#}

# Default os_image. This value is not used if the specific values are set (e.g.: hana_os_image)
# Run the next command to get the possible options and use the 4th column value (version can be changed by `latest`)
# az vm image list --output table --publisher SUSE --all
# BYOS example with sles4sap 15 sp2 (this value is a pattern, it will select the latest version that matches this name)
#os_image = "SUSE:sles-sap-15-sp2-byos:gen2:latest"

# The project requires a pair of SSH keys (public and private) to provision the machines
# The private key is only used to create the SSH connection, it is not uploaded to the machines
# Besides the provisioning, the SSH connection for this keys will be authorized in the created machines
# These keys are provided using the next two variables in 2 different ways
# Path to already existing keys
public_key  = "/home/myuser/.ssh/id_rsa.pub"
private_key = "/home/myuser/.ssh/id_rsa"

# Or provide the content of SSH keys
#public_key  = "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCt06V...."
#private_key = <<EOF
#-----BEGIN OPENSSH PRIVATE KEY-----
#b3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAABFwAAAAdzc2gtcn
#...
#P9eYliTYFxhv/0E7AAAAEnhhcmJ1bHVAbGludXgtYWZqOQ==
#-----END OPENSSH PRIVATE KEY-----
#EOF

# Authorize additional keys optionally (in this case, the private key is not required)
# Path to local files or keys content
#authorized_keys = ["/home/myuser/.ssh/id_rsa_second_key.pub", "/home/myuser/.ssh/id_rsa_third_key.pub", "ssh-rsa AAAAB3NzaC1yc2EAAAA...."]

# An additional pair of SSH keys is needed to provide the HA cluster the capability to SSH among the machines
# This keys are uploaded to the machines!
# If `pre_deployment = true` is used, this keys are autogenerated
cluster_ssh_pub = "salt://sshkeys/cluster.id_rsa.pub"
cluster_ssh_key = "salt://sshkeys/cluster.id_rsa"

##########################
# Other deployment options
##########################

# Repository url used to install HA/SAP deployment packages"
# The latest RPM packages can be found at:
# https://download.opensuse.org/repositories/network:/ha-clustering:/Factory/{YOUR OS VERSION}
# Contains the salt formulas rpm packages.
# To auto detect the SLE version
#ha_sap_deployment_repo = "https://download.opensuse.org/repositories/network:ha-clustering:sap-deployments:devel/"
# Otherwise use a specific SLE version:
#ha_sap_deployment_repo = "https://download.opensuse.org/repositories/network:ha-clustering:sap-deployments:devel/SLE_15/"
#ha_sap_deployment_repo = ""

# Provisioning log level (error by default)
#provisioning_log_level = "info"

# Print colored output of the provisioning execution (true by default)
#provisioning_output_colored = false

# Enable pre deployment steps (disabled by default)
#pre_deployment = true

# To disable the provisioning process
#provisioner = ""

# Run provisioner execution in background
#background = true

# QA variables

# Define if the deployment is used for testing purpose
# Disable all extra packages that do not come from the image
# Except salt-minion (for the moment) and salt formulas
# true or false (default)
#qa_mode = false

# Execute HANA Hardware Configuration Check Tool to bench filesystems
# qa_mode must be set to true for executing hwcct
# true or false (default)
#hwcct = false

##########################
# Bastion (jumpbox) machine variables
##########################

# Enable bastion usage. If this option is enabled, it will create a unique public ip address that is attached to the bastion machine.
# The rest of the machines won't have a public ip address and the SSH connection must be done through the bastion
#bastion_enabled = true

# Bastion SSH keys. If they are not set the public_key and private_key are used
#bastion_public_key  = "/home/myuser/.ssh/id_rsa_bastion.pub"
#bastion_private_key = "/home/myuser/.ssh/id_rsa_bastion"

# Bastion machine os image. If it is not provided, the os_image variable data is used
# BYOS example
# bastion_os_image = "SUSE:sles-sap-15-sp2-byos:gen2:latest"

#########################
# HANA machines variables
# This example shows the demo option values.Find more options in the README file
#########################

# HANA configuration ()
# VM size to use for the cluster nodes
#hana_vm_size = "Standard_E4s_v3"

# Number of nodes in the cluster
#hana_count = "2"

# Instance number for the HANA database. 00 by default.
#hana_instance_number = "00"

# Network options
#hana_enable_accelerated_networking = false

# Disk configuration
#hana_data_disks_configuration = {
#  disks_type       = "Premium_LRS,Premium_LRS,Premium_LRS,Premium_LRS,Premium_LRS,Premium_LRS"
#  disks_size       = "512,512,512,512,64,1024"
#  caching          = "ReadOnly,ReadOnly,ReadOnly,ReadOnly,ReadOnly,None"
#  writeaccelerator = "false,false,false,false,false,false"
#  luns             = "0,1,2#3#4#5"
#  names            = "datalog#shared#usrsap#backup"
#  lv_sizes         = "70,100#100#100#100"
#  paths            = "/hana/data,/hana/log#/hana/shared#/usr/sap#/hana/backup"
#}

# SLES4SAP image information
# If custom uris are enabled public information will be omitted
# Custom sles4sap image
#sles4sap_uri = "/path/to/your/image"

# Public OS images
# BYOS example
# hana_os_image = "SUSE:sles-sap-15-sp2-byos:gen2:latest"

# The next variables define how the HANA installation software is obtained.
# The installation software must be located in a Azure storage account

# Azure storage account name
storage_account_name = "YOUR_STORAGE_ACCOUNT_NAME"
# Azure storage account secret key (key1 or key2)
storage_account_key = "YOUR_STORAGE_ACCOUNT_KEY"

# 'hana_inst_master' is a Azure Storage account share where HANA installation files (extracted or not) are stored
# `hana_inst_master` must be used always! It is used as the reference path to the other variables

# Local folder where HANA installation master will be mounted
#hana_inst_folder = "/sapmedia/HANA"

# To configure the usage there are multiple options:
# 1. Use an already extracted HANA Platform folder structure.
# The last numbered folder is the HANA Platform folder with the extracted files with
# something like `HDB:HANA:2.0:LINUX_X86_64:SAP HANA PLATFORM EDITION 2.0::XXXXXX` in the LABEL.ASC file
hana_inst_master = "//YOUR_STORAGE_ACCOUNT_NAME.file.core.windows.net/sapdata/sap_inst_media/51053381"

# 2. Combine the `hana_inst_master` with `hana_platform_folder` variable.
#hana_inst_master = "//YOUR_STORAGE_ACCOUNT_NAME.file.core.windows.net/sapdata/sap_inst_media"
# Specify the path to already extracted HANA platform installation media, relative to hana_inst_master mounting point.
# This will have preference over hana archive installation media
#hana_platform_folder = "51053381"

# 3. Specify the path to the HANA installation archive file in either of SAR, RAR, ZIP, EXE formats, relative to the 'hana_inst_master' mounting point
# For multipart RAR archives, provide the first part EXE file name.
#hana_archive_file = "51053381_part1.exe"

# 4. If using HANA SAR archive, provide the compatible version of sapcar executable to extract the SAR archive
# HANA installation archives be extracted to path specified at hana_extract_dir (optional, by default /sapmedia/HANA)
#hana_archive_file = "IMDB_SERVER.SAR"
#hana_sapcar_exe = "SAPCAR"

# For option 3 and 4, HANA installation archives are extracted to the path specified
# at hana_extract_dir (optional, by default /sapmedia_extract/HANA). This folder cannot be the same as `hana_inst_folder`!
#hana_extract_dir = "/sapmedia_extract/HANA"

# The following SAP HANA Client variables are needed only when you are using a HANA database SAR archive for HANA installation.
# HANA Client is used by monitoring & cost-optimized scenario and it is already included in HANA platform media unless a HANA database SAR archive is used
# You can provide HANA Client in one of the two options below:
# 1. Path to already extracted hana client folder, relative to hana_inst_master mounting point
#hana_client_folder = "SAP_HANA_CLIENT"
# 2. Or specify the path to the hana client SAR archive file, relative to the 'hana_inst_master'. To extract the SAR archive, you need to also provide compatible version of sapcar executable in variable hana_sapcar_exe
# It will be extracted to hana_client_extract_dir path (optional, by default /sapmedia_extract/HANA_CLIENT)
#hana_client_archive_file = "IMDB_CLIENT20_003_144-80002090.SAR"
#hana_client_extract_dir = "/sapmedia_extract/HANA_CLIENT"

# Enable system replication and HA cluster
#hana_ha_enabled = true

# Disable minimal memory checks for HANA. Useful to deploy development clusters.
# Low memory usage can cause a failed deployment. Be aware that this option does
# not work with any memory size and will most likely fail with less than 16 GiB
#hana_ignore_min_mem_check = false

# Each host IP address (sequential order). If it's not set the addresses will be auto generated from the provided vnet address range
#hana_ips = ["10.74.1.11", "10.74.1.12"]

# IP address used to configure the hana cluster floating IP. It must belong to the same subnet than the hana machines
#hana_cluster_vip = "10.74.1.13"

# Enable Active/Active HANA setup (read-only access in the secondary instance)
#hana_active_active = true

# HANA cluster secondary vip. This IP address is attached to the read-only secondary instance. Only needed if hana_active_active is set to true
#hana_cluster_vip_secondary = "10.74.1.14"

# HANA instance configuration
# Find some references about the variables in:
# https://help.sap.com
# HANA instance system identifier. It's composed of 3 characters string
#hana_sid = "prd"
# HANA instance number. It's composed of 2 integers string
#hana_instance_number = "00"
# HANA instance master password. It must follow the SAP Password policies
#hana_master_password = "YourPassword1234"
# HANA primary site name. Only used if HANA's system replication feature is enabled (hana_ha_enabled to true)
#hana_primary_site = "Site1"
# HANA secondary site name. Only used if HANA's system replication feature is enabled (hana_ha_enabled to true)
#hana_secondary_site = "Site2"

# Cost optimized scenario
#scenario_type = "cost-optimized"

#######################
# SBD related variables
#######################

# In order to enable SBD, an ISCSI server is needed as right now is the only option
# All the clusters will use the same mechanism

# Custom iscsi server image
#iscsi_srv_uri = "/path/to/your/iscsi/image"

# Public image usage for iSCSI. BYOS example
#iscsi_os_image = "SUSE:sles-sap-15-sp2-byos:gen2:latest"

# IP address of the iSCSI server. If it's not set the address will be auto generated from the provided vnet address range
#iscsi_srv_ip = "10.74.1.14"
# Number of LUN (logical units) to serve with the iscsi server. Each LUN can be used as a unique sbd disk
#iscsi_lun_count = 3
# Disk size in GB used to create the LUNs and partitions to be served by the ISCSI service
#iscsi_disk_size = 10

##############################
# Monitoring related variables
##############################

# Custom monitoring server image
#monitoring_uri = "/path/to/your/monitoring/image"

# Public image usage for the monitoring server. BYOS example
#monitoring_os_image = "SUSE:sles-sap-15-sp2-byos:gen2:latest"

# Enable the host to be monitored by exporters
#monitoring_enabled = true

# IP address of the machine where Prometheus and Grafana are running. If it's not set the address will be auto generated from the provided vnet address range
#monitoring_srv_ip = "10.74.1.13"

########################
# DRBD related variables
########################

# Custom drbd nodes image
#drbd_image_uri = "/path/to/your/monitoring/image"

# Public image usage for the DRBD machines. BYOS example
#drbd_os_image = "SUSE:sles-sap-15-sp2-byos:gen2:latest"

# Enable drbd cluster
#drbd_enabled = true

# Each drbd cluster host IP address (sequential order). If it's not set the addresses will be auto generated from the provided vnet address range
#drbd_ips = ["10.74.1.21", "10.74.1.22"]
#drbd_cluster_vip = "10.74.1.23"


# NFS share mounting point and export. Warning: Since cloud images are using cloud-init, /mnt folder cannot be used as standard mounting point folder
# It will create the NFS export in /mnt_permanent/sapdata/{netweaver_sid} to be connected as {drbd_cluster_vip}:/{netwaever_sid} (e.g.: )192.168.1.20:/HA1
#drbd_nfs_mounting_point = "/mnt_permanent/sapdata"

#############################
# Netweaver related variables
#############################

#netweaver_enabled = true

# Netweaver APP server count (PAS and AAS)
# Set to 0 to install the PAS instance in the same instance as the ASCS. This means only 1 machine is installed in the deployment (2 if HA capabilities are enabled)
# Set to 1 to only enable 1 PAS instance in an additional machine`
# Set to 2 or higher to deploy additional AAS instances in new machines
#netweaver_app_server_count = 2

# Custom drbd nodes image
#netweaver_image_uri = "/path/to/your/monitoring/image"

# Public image usage for the Netweaver machines. BYOS example
#netweaver_os_image = "SUSE:sles-sap-15-sp2-byos:gen2:latest"

# If the addresses are not set they will be auto generated from the provided vnet address range
#netweaver_ips = ["10.74.1.30", "10.74.1.31", "10.74.1.32", "10.74.1.33"]
#netweaver_virtual_ips = ["10.74.1.35", "10.74.1.36", "10.74.1.37", "10.74.1.38"]

# Netweaver installation configuration
# Netweaver system identifier. It's composed of 3 characters string
#netweaver_sid = "ha1"
# Netweaver ASCS instance number. It's composed of 2 integers string
#netweaver_ascs_instance_number = "00"
# Netweaver ERS instance number. It's composed of 2 integers string
#netweaver_ers_instance_number = "10"
# Netweaver PAS instance number. If additional AAS machines are deployed, they get the next number starting from the PAS instance number. It's composed of 2 integers string
#netweaver_pas_instance_number = "01"
# NetWeaver or S/4HANA master password.
# It must follow the SAP Password policies such as having 8 - 14 characters for NetWeaver or 10 - 14 characters for S/4HANA.
# It cannot start with special characters and must contain a combination of upper and lower case characters and numbers (Invalid characters are backslash and double quote).
#netweaver_master_password = "SuSE1234"

# Enabling this option will create a ASCS/ERS HA available cluster
#netweaver_ha_enabled = true

# VM sizes
#netweaver_xscs_vm_size = Standard_D2s_v3
#netweaver_app_vm_size = Standard_D2s_v3

# Set the Netweaver product id. The 'HA' sufix means that the installation uses an ASCS/ERS cluster
# Below are the supported SAP Netweaver product ids if using SWPM version 1.0:
# - NW750.HDB.ABAP
# - NW750.HDB.ABAPHA
# - S4HANA1709.CORE.HDB.ABAP
# - S4HANA1709.CORE.HDB.ABAPHA
# Below are the supported SAP Netweaver product ids if using SWPM version 2.0:
# - S4HANA1809.CORE.HDB.ABAP
# - S4HANA1809.CORE.HDB.ABAPHA
# - S4HANA1909.CORE.HDB.ABAP
# - S4HANA1909.CORE.HDB.ABAPHA

# Example:
#netweaver_product_id = "NW750.HDB.ABAPHA"

# NFS share to store the Netweaver shared files. Only used if drbd_enabled is not set. For single machine deployments (ASCS and PAS in the same machine) set an empty string
#netweaver_nfs_share = "url-to-your-netweaver-sapmnt-nfs-share"

# Path where netweaver sapmnt data is stored.
#netweaver_sapmnt_path = "/sapmnt"

# Preparing the Netweaver download basket. Check `doc/sap_software.md` for more information

# Azure storage account where all the Netweaver software is available. The next paths are relative to this folder.
#netweaver_storage_account_key = "YOUR_STORAGE_ACCOUNT_KEY"
#netweaver_storage_account_name = "YOUR_STORAGE_ACCOUNT_NAME"
#netweaver_storage_account = "//YOUR_STORAGE_ACCOUNT_NAME.file.core.windows.net/path/to/your/nw/installation/master"

# Netweaver installation required folders
# SAP SWPM installation folder, relative to the netweaver_storage_account mounting point
#netweaver_swpm_folder     =  "your_swpm"
# Or specify the path to the sapcar executable & SWPM installer sar archive, relative to the netweaver_storage_account mounting point
# The sar archive will be extracted to path specified at netweaver_extract_dir under SWPM directory (optional, by default /sapmedia_extract/NW/SWPM)
#netweaver_sapcar_exe = "your_sapcar_exe_file_path"
#netweaver_swpm_sar = "your_swpm_sar_file_path"
# Folder where needed SAR executables (sapexe, sapdbexe) are stored, relative to the netweaver_storage_account mounting point
#netweaver_sapexe_folder   =  "download_basket"
# Additional media archives or folders (added in start_dir.cd), relative to the netweaver_storage_account mounting point
#netweaver_additional_dvds = ["dvd1", "dvd2"]