Not showing battery level nRF52810 #33
Description
Last login: Thu Dec 4 14:17:49 on ttys001
omar@Mac-mini-OMAR ~ %
cd /Users/omar/Downloads/heystack-nrf5x-master/nrf52810/armgcc
source venv/bin/activate
make clean
make HAS_BATTERY=1 stflash-nrf52810_xxaa-patched
ADV_KEYS_FILE=36KFLD_keyfile
GNU_INSTALL_ROOT=/Users/omar/Downloads/heystack-nrf5x-master/nrf-sdk/gcc-arm-none-eabi-6-2017-q2-update/bin/
openocd -f openocd.cfg -c "init; halt; nrf5 mass_erase; reset; exit"
openocd -f openocd.cfg -c "init; halt; program _build/nrf52810_xxaa_s112_patched.bin verify; reset; exit"
zsh: command not found: #
zsh: unknown file attribute: ^
zsh: command not found: #
rm -rf _build
zsh: command not found: #
mkdir _build
cd _build && mkdir nrf52810_xxaa
Compiling file: es_battery_voltage_saadc.c
Compiling file: nrfx_saadc.c
Assembling file: gcc_startup_nrf52810.S
Compiling file: nrf_log_backend_rtt.c
Compiling file: nrf_log_backend_serial.c
Compiling file: nrf_log_backend_uart.c
Compiling file: nrf_log_default_backends.c
Compiling file: nrf_log_frontend.c
Compiling file: nrf_log_str_formatter.c
Compiling file: app_button.c
Compiling file: app_error.c
Compiling file: app_error_handler_gcc.c
Compiling file: app_error_weak.c
Compiling file: app_scheduler.c
Compiling file: app_timer.c
Compiling file: app_util_platform.c
Compiling file: hardfault_implementation.c
Compiling file: nrf_assert.c
Compiling file: nrf_atfifo.c
Compiling file: nrf_atflags.c
Compiling file: nrf_atomic.c
Compiling file: nrf_balloc.c
Compiling file: nrf_fprintf.c
Compiling file: nrf_fprintf_format.c
Compiling file: nrf_memobj.c
Compiling file: nrf_pwr_mgmt.c
Compiling file: nrf_ringbuf.c
Compiling file: nrf_section_iter.c
Compiling file: nrf_strerror.c
Compiling file: system_nrf52810.c
Compiling file: boards.c
Compiling file: nrf_drv_clock.c
Compiling file: nrfx_atomic.c
Compiling file: nrfx_clock.c
Compiling file: nrfx_gpiote.c
Compiling file: nrfx_prs.c
Compiling file: main.c
In file included from ../../main.c:54:0:
../../main.h:43:9: note: #pragma message: RTC_FREQUENCY: (32768 / (31 + 1))
#pragma message("RTC_FREQUENCY: " _STRINGIFY(COMPUTED_RTC_FREQUENCY))
^~~~~~~
../../main.h:44:9: note: #pragma message: MAX_TIMER_INTERVAL_SECONDS: (0xFFFFFF / (32768 / (31 + 1)))
#pragma message("MAX_TIMER_INTERVAL_SECONDS: " _STRINGIFY(COMPUTED_MAX_TIMER_INTERVAL))
^~~~~~~
Compiling file: ble_stack.c
Compiling file: SEGGER_RTT.c
Compiling file: SEGGER_RTT_Syscalls_GCC.c
Compiling file: SEGGER_RTT_printf.c
Compiling file: ble_advdata.c
Compiling file: ble_conn_params.c
Compiling file: ble_conn_state.c
Compiling file: ble_srv_common.c
Compiling file: nrf_ble_gatt.c
Compiling file: nrf_ble_qwr.c
Compiling file: utf.c
Compiling file: ble_lbs.c
Compiling file: nrf_sdh.c
Compiling file: nrf_sdh_ble.c
Compiling file: nrf_sdh_soc.c
Linking target: _build/nrf52810_xxaa.out
text data bss dec hex filename
11916 160 776 12852 3234 _build/nrf52810_xxaa.out
Preparing: _build/nrf52810_xxaa.hex
Preparing: _build/nrf52810_xxaa.bin
DONE nrf52810_xxaa
merging application and softdevice... : nrf52810_xxaa
mergehex -m _build/nrf52810_xxaa.hex ../../nrf-sdk/nRF5_SDK_15.3.0_59ac345/components/softdevice/s112/hex/s112_nrf52_6.1.1_softdevice.hex -o _build/nrf52810_xxaa_s112.hex
Parsing input files.
Merging file "nrf52810_xxaa.hex" into output.
Merging file "s112_nrf52_6.1.1_softdevice.hex" into output.
Storing merged file.
python -c "from intelhex import IntelHex; ih = IntelHex(); ih.loadhex('_build/nrf52810_xxaa_s112.hex'); ih.tobinfile('_build/nrf52810_xxaa_s112.bin')"
Patching nrf52810_xxaa
cp _build/nrf52810_xxaa_s112.bin _build/nrf52810_xxaa_s112_patched.bin
xxd -p -c 100000 36KFLD_keyfile | xxd -r -p | dd of=_build/nrf52810_xxaa_s112_patched.bin skip=1 bs=1 seek=112760 conv=notrunc
28+0 records in
28+0 records out
28 bytes transferred in 0.000070 secs (400000 bytes/sec)
#xxd -p -c 100000 _build/nrf52810_xxaa_s112_patched.bin | grep -q 2d6e20454e444f464b455953454e444f464b455953454e444f464b455953210a || (echo "The key was not patched correctly!"; exit 1)
'/Users/omar/Downloads/heystack-nrf5x-master/nrf-sdk/gcc-arm-none-eabi-6-2017-q2-update/bin/arm-none-eabi-objcopy' -I binary -O elf32-littlearm -B arm _build/nrf52810_xxaa_s112_patched.bin _build/nrf52810_xxaa_s112_patched.elf
flashing application and softdevice...
openocd -f openocd.cfg -c "init; halt; nrf5 mass_erase; program _build/nrf52810_xxaa_s112_patched.bin verify; reset; exit";
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
nRF52 device has a CTRL-AP dedicated to recover the device from AP lock.
A high level adapter (like a ST-Link) you are currently using cannot access
the CTRL-AP so 'nrf52_recover' command will not work.
Do not enable UICR APPROTECT.
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VID:PID 0483:3748
Info : Target voltage: 3.243973
Info : [nrf52.cpu] Cortex-M4 r0p1 processor detected
Info : [nrf52.cpu] target has 6 breakpoints, 4 watchpoints
Info : starting gdb server for nrf52.cpu on 3333
Info : Listening on port 3333 for gdb connections
[nrf52.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x61000000 pc: 0x00011682 msp: 0x20005fc0
Info : nRF52810-QFAA(build code: D1) 192kB Flash, 24kB RAM
Info : Mass erase completed.
[nrf52.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
** Programming Started **
Warn : Adding extra erase range, 0x0001bf2c .. 0x0001bfff
** Programming Finished **
** Verify Started **
** Verified OK **
zsh: command not found: #
zsh: command not found: #
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
nRF52 device has a CTRL-AP dedicated to recover the device from AP lock.
A high level adapter (like a ST-Link) you are currently using cannot access
the CTRL-AP so 'nrf52_recover' command will not work.
Do not enable UICR APPROTECT.
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VID:PID 0483:3748
Info : Target voltage: 3.240795
Info : [nrf52.cpu] Cortex-M4 r0p1 processor detected
Info : [nrf52.cpu] target has 6 breakpoints, 4 watchpoints
Info : starting gdb server for nrf52.cpu on 3333
Info : Listening on port 3333 for gdb connections
[nrf52.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x61000000 pc: 0x00011682 msp: 0x20005fc0
Info : nRF52810-QFAA(build code: D1) 192kB Flash, 24kB RAM
Info : Mass erase completed.
zsh: command not found: #
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
nRF52 device has a CTRL-AP dedicated to recover the device from AP lock.
A high level adapter (like a ST-Link) you are currently using cannot access
the CTRL-AP so 'nrf52_recover' command will not work.
Do not enable UICR APPROTECT.
Info : clock speed 1000 kHz
Info : STLINK V2J37S7 (API v2) VID:PID 0483:3748
Info : Target voltage: 3.240795
Info : [nrf52.cpu] Cortex-M4 r0p1 processor detected
Info : [nrf52.cpu] target has 6 breakpoints, 4 watchpoints
Info : starting gdb server for nrf52.cpu on 3333
Info : Listening on port 3333 for gdb connections
[nrf52.cpu] halted due to debug-request, current mode: Handler HardFault
xPSR: 0x01000003 pc: 0xfffffffe msp: 0xffffffd8
[nrf52.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
** Programming Started **
Info : nRF52810-QFAA(build code: D1) 192kB Flash, 24kB RAM
Warn : Adding extra erase range, 0x0001bf2c .. 0x0001bfff
** Programming Finished **
** Verify Started **
** Verified OK **
(venv) omar@Mac-mini-OMAR armgcc %