MiniDexed Shield: A(nother) MiniDexed Pcb #721
Replies: 6 comments 12 replies
-
|
Oh this is very cool :) |
Beta Was this translation helpful? Give feedback.
-
|
thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Looks great. Thanks for sharing. |
Beta Was this translation helpful? Give feedback.
-
|
Very cool! Is the master volume control digital or analog. Could you please explain it in detail? |
Beta Was this translation helpful? Give feedback.
-
|
Its simply a dual 100k audio taper pot on the output. Ill try to put up a jpg schematic soon. |
Beta Was this translation helpful? Give feedback.
-
|
I found the schematic already, but I could find the value of the pot. Anyway, a jpg schematic would be helpful für anybody... |
Beta Was this translation helpful? Give feedback.
-
|
In general, the value is not super critical, 100k - 1m will work. Be sure to use Audio taper tho'. Schematic, build guide etc are all on my to "do list" |
Beta Was this translation helpful? Give feedback.
-
|
Btw, if any one is interested in PCBs, full kits, or completed devices, just ask. ( I may eventually put them on my reverb/etsy shops and the Discord Linear night market channel,(... another thing on my list.)) I do have a few boards from the prototype batch that have a few minor errors (nothing major) that I would be happy to give out for free (+ shipping, of course... or you can pick them up in lovely Fribourg, Switzerland! ) You can contact me via email : charbot at gmail |
Beta Was this translation helpful? Give feedback.
-
|
Any possibility to add standard DIN connectors for MIDI as an add-on board? |
Beta Was this translation helpful? Give feedback.
-
|
There is no room to directly solder DIN jacks, but you could make a daughter board or use panel mount jacks and wire them from the 3.5 jack pads. Send me a email and we can discuss the details. I added my contact to the previous post. |
Beta Was this translation helpful? Give feedback.
-
|
That build/board looks amazing :) I have found in my own pcbs that it is possible to overlap MIDI TRS and DIN footprints on the board as an option, but looking at your board that might make it slightly longer, and maybe a little wider... Here's an example for my RPi 400 MiniDexed board: https://diyelectromusic.com/2023/12/18/rpi-400-midi-and-audio-pcb-design/ I can't claim credit mind - I pinched the idea from the Adafruit MIDI Feather Wing! Kevin |
Beta Was this translation helpful? Give feedback.
-
|
Hey thanks! I have to admit tho', Im really starting to appreciate (even love) trs midi (only type A, of course!) and have embraced it for a few other projects. It is perfect for diminutive pocket-sized synths like this and is great for travel / small desktop setups. DIN-TRS adapter are pretty common nowadays and personally, I welcome the thinner( and usually shorter) cables. |
Beta Was this translation helpful? Give feedback.
-
|
(looks like im replying to a post that has disappeared!?) I have several pcbs still available and can provide completed units, Kits with almost all parts and bare pcbs... contact me directly if you are interested. my email is above. Ive been meaning to post them on etsy or something, but Im kinda lazy. What are the issues with the files on github? Ill have to double check, all the files should be there. the only issue with the older commit was there were a few overlaps in the border edge cuts and this prevent kicad from generating a .step file. Everything should be good otherwise for generating the gerbers. it is what I used for the pcbs. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, sorry yes.. I saw later that you'd posted to contact via email, so did that instead :) I'd be very keen on either purchasing PCB or a kit if you've any available. The latest merge on github appeared to have an empty PCB file when I last looked. I did go back to some previous commits but as you say, the border edge cuts flagged as an issue and I wasn't confident enough to proceed |
Beta Was this translation helpful? Give feedback.
-
|
i dont see your email, double check the address... charbot at gmail |
Beta Was this translation helpful? Give feedback.
-
|
Seems that's what I used, assuming dot com. Strange! |
Beta Was this translation helpful? Give feedback.
-
|
I've emailed again this morning to the address as above, thanks. |
Beta Was this translation helpful? Give feedback.
-
|
Hi, -- BOM -- -- adapt minidexed.ini file --
Use the extra tall 20x2 socket for the Raspberry Pi connection.
The DAC does not use a socket, but is soldered directly to the board with pin headers. Take care of the height when inserting the Pi.
There are 3 jumper pads for configuring how the audio out is routed. Those pads may be bridged with a 0 ohm resistor, or just a blob of solder. -- Comment from the designer -- In my config, I let all the pads in their default position.
For the volume/encoder board , it needs to sit lower, so use normal long pins without the black spacer. To assemble it, first solder in the female sockets, then put the volume board directly ontop the sockets and then put individual pins through the holes into the socket. Solder from the top side then cut the pins down on the topside.
|
Beta Was this translation helpful? Give feedback.
-
Id like to share my new version of a miniDexed PCB:
I wanted to make something that is compact and full-featured, while still keeping it as simple/ inexpensive as possible and friendly for DIY beginners. (While I initially wanted to make my "ideal" minidexed, just for me!) I am the repair tech at a synth museum and I often get requests to do "DIY Synth building workshops." Usually, I turn them down because Ive never really found a circuit that is both simple enough for beginners to build in one sitting and that is also a nice, worthwhile, and playable instrument. (Personally I find most of these simple square wave/ drone/ optical theremin/ noise maker-type synth projects rather dreadful.) MiniDexed has long been a contender, but I needed a solution that puts it all together in a tidy, permanent package and avoids fussy dupont jumpers and some kind of costly/impractical (at least for for class settings) 3d printed enclosure the keep everything together. Also, it needs to keep the part count to a minimum and use (mostly*) through hole components. The "shield" format seemed ideal (yes, i know that for pi, they are technically called "hats", but to me they are all "shields"... anyway...)
Voila:
It uses all easy to source, off-the-shelf parts : a 1602 LCD, a cheap and cheerful (yet impressively good ) PCM5102A DAC module, an encoder, and of course, a raspberry pi. It features 2x 1/4" output jacks and a stereo 3.5mm jack for the Audio Out, TRS (type A) Midi IN and OUT. User configurable solder pads allow for a few different audio routing options: mono summing on the 1/4" jacks, bypassing the 1/4" jacks when a 3.5mm cable is is connected, and Direct out or Master Volume control
It can be built minimally with just the main board (+ Screen, Dac and encoder), or with an optional "Control" expander board that raises the encoder to make it easier for panel mounting, and/or or adding a Master Volume control. 3 different types of GPIO expander boards accomodate different types of GPIO buttons - either 5x pcb tactile switches or 4x (socketed) Kalih Choc or Cherry MX key switches.
(Im still fleshing it out, but eventually) more info ( kicad files, build guide, minidexed.ini config, etc) can be found on my github:
https://github.com/miotislucifugis/MiniDexed-Shield
Beta Was this translation helpful? Give feedback.
All reactions