Upload to printer SD card

[probonopd]

We could try to upload to printer SD card, although it is reported to be very slow.

[probonopd]

• http://marlinfw.org/docs/gcode/M020.html M20 - List SD Card
• http://marlinfw.org/docs/gcode/M021.html M21 - Init SD card
• http://marlinfw.org/docs/gcode/M022.html M22 - Release SD card
• http://marlinfw.org/docs/gcode/M023.html M23 - Select SD file
• http://marlinfw.org/docs/gcode/M028.html M28 - Start SD write
• http://marlinfw.org/docs/gcode/M029.html M29 - Stop SD write
• http://marlinfw.org/docs/gcode/M024.html M24 - Start or Resume SD print

[probonopd]

Most interestingly, we could use

• http://marlinfw.org/docs/gcode/M928.html M928 - Start SD Logging

Use this command to start logging all console and host input to an SD file while still operating the machine.

The way I understand it, we could print at normal speed and after a complete print would find the printed GCODE on the printer's SD card, from where it could be re-printed at any time.

Might also come in handy for debugging purposes.

Try this by adding to a GCODE file as the first line:

M22 ; Release SD card
M21 ; Init SD card
M928 log.gcode ; Start logging to SD card

(replace log.txt with the name of the GCODE file being uploaded),
and as the last line:

M29 ; Stop logging to SD card

We should probably save the file as ERROR-name-of-the.gcode and rename it to name-of-the.gcode only after the print has succeeded. This way we won't accidentally print half-complete GCODE.

[GMagician]

It seems promising...

[probonopd]

Trying it manually as we speak.

[GMagician]

Perhaps I think printer still print sent code

[probonopd]

I don't see the GCODE being saved, do you?

M22 ; Release SD card
M21 ; Init SD card
M23 log.gcode ; Select SD file
M928 log.gcode ; Start logging to SD card
; TEST
M29 ; Stop logging to SD card

telnet says:

>M21 
<echo:SD card ok#wait more#
<ok#ok#
>M928 log.gcode 
<echo:Now fresh file: log.gcode #wait more#
<open failed, File: log.gcode .#wait more#
<ok#ok#
>M29 
<ok#ok#
>M117 Complete

Perhaps we need M23.

[GMagician]

I can't test...long print... but

<open failed, File: log.gcode .#wait more#

is not a good sign..

Loocking into marlin code M928 opens a file and set some flags, nothing more should be needed

[probonopd]

With it, getting

>M21 
<echo:SD card ok#wait more#
<ok#ok#
>M23 log.gcode 
<echo:Now fresh file: log.gcode#wait more#
<open failed, File: log.gcode.#wait more#
<ok#ok#
>M928 log.gcode 
<echo:Now fresh file: log.gcode #wait more#
<open failed, File: log.gcode .#wait more#
<ok#ok#
>M29 
<ok#ok#
>M117 Complete
<ok#ok#

[probonopd]

I am stuck here. Running stock Marlin bugfix-1.1.x firmware from https://github.com/probonopd/marlin-for-ender-2.

[GMagician]

open in marlin calls:

if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))

and fail to this will send such error message.
I'm looking at marlin 2.0 source.

I don't like both O_CREAT and O_APPEND but I need to wait 4h before checking something

[probonopd]

Tried with 2 SD cards, and also with LOG.GCO as the filename.

[probonopd]

Prusa i3 MK2S says:

>M22 
<ok#ok#
>M21 
<echo:SD card ok#wait more#
<ok#ok#
>M23 LOG.GCO 
<ok#ok#
>M928 LOG.GCO 
<ok#ok#
>M29 
<ok#ok#
>M117 Complete
<ok#ok#
>M105

but I don't see the file on the printer's SD card either.