Raspberry Pi OS + Recalbox installation fails

[lmutt]

I tried to install "Raspberry Pi OS Lite (32-bit)" + "RECALBOX" with latest PINN (from https://sourceforge.net/projects/pinn/files/latest/download), but in the end of installation appears a dialog with the message "OS(es) Installed with error. See debug log for details." and an "OK" button. Clicking in this OK button, the hardware reboots and boots in "Raspberry Pi OS Lite (32-bit)" successfully. Rebooting again from this OS, in the PINN menu, Recalbox does not appears as an option (the menu flashes so fast that there is no time to read). With shift pressed, in "recovery mode" I was able to confirm that the Recalbox was not listed as installed. After this, inserting the SD card in my PC, I've checked that the partition called "RECALBOX" is empty.

What could be the problem? I've tried the same setup with NOOBS and both OS works.

Please see the debug file collected from /tmp/debug, attached.
debug.txt

PS: This is my first trial on PINN after discovering that NOOBS does not support HDMI CEC or Joystick input (there were some issues with CEC and Joystick with PINN, but this is a minor issue that I will try to resolve later). My hardware is an Raspberry Pi 1B, with an 16 GB SD card.

[procount]

Recalbox is a new version that has just been released for NOOBS by it's maintainers. I've not even tried it myself yet.
Thanks for including debug.txt. it indicates the setup script failed, which causes PINN to delete the installation.
It's odd that it works in NOOBS though.
It probably needs some changes to it's meta files.
I'll investigate the issue.
Thanks for reporting it. Sorry you found this on your first use of PINN.

[annaclets]

Recalbox's partition image is web based. It may have simply failed to download.

The solution is simply just try again.

[lmutt]

Recalbox's partition image is web based. It may have simply failed to download.

The solution is simply just try again.

I've tried 2 times.

[procount]

There are some issues with their metadata, like the OS name for PI0 and PI1 has a '/' in it, which doesn't play well
I had offered to review their files, but I haven't had time to yet.
It will require some changes, so please be patient for a while.

[lmutt]

There are some issues with their metadata, like the OS name for PI0 and PI1 has a '/' in it, which doesn't play well
I had offered to review their files, but I haven't had time to yet.
It will require some changes, so please be patient for a while.

Thank you very much. I will wait.

[lmutt]

Wouldn't it be simpler to adapt PINN to be more robust with OS metadata than trying to convince an OS to correct its metadata? I also remember that it works in NOOBS (that I abandoned because it requires keyboard/mouse to select the OS).

[procount]

I will update PINN anyway. It's only the pi0/1 version that doesn't work. The pi2 pi3 and pi4 should all download ok.
But none of the extra PINN features will work with recalbox atm, like download or backup

[tommyrydel]

@procount I have the exact same issue mentioned. "OS(es) Installed with error. See debug log for details." and the Recalbox was not installed and empty when I open it on my PC.
I'm running Raspberry Pi 3B+ and a 32 GB SD card.

I'm new to this world so maybe I'm doing something wrong, but exactly the same issue.

[procount]

Recalbox is not correct at the moment. I will work with the maintainers to fix this. Please be patient in the meantime.

[procount]

Retropie

No idea. It worked last time I tried it. I will put it in the queue (which is unusually very long at the moment....)

[ernesto-barroso]

the same here: i've just tried it and get the same error: «OS(es) Installed with error».

i'm also running a RaspBerry Pi 3 and it also worked with NOOBS (a dual installation, LibreELEC + Recalbox).

is there any other way to make it work?

anyway, i would like to thank you your work in PINN: i can use my gamepad in the boot menu!

[procount]

the same here:

You mean Recalbox? - same answer as above, or LibreELEC?

[ernesto-barroso]

recalbox, sorry. i mean i've tried to install libre elec + recalbox with PINN and recalbox failed to install (it does work with NOOBS to me).

[hyperbrute]

Hi,
Same error «OS(es) Installed with error» for me with raspberryos+libreelec+recalbox with PINN on RaspBerry Pi 3 on 64GB SD card.
If it could help:
debut.txt (juste the error):

Executing: "/usr/sbin/mkfs.ext4 -L OVERLAY /dev/mmcblk0p8" 
part "/dev/mmcblk0p6" "6B1B-258B" "RECALBOX" 
part "/dev/mmcblk0p7" "" "" 
part "/dev/mmcblk0p8" "bff55274-ddec-4a1f-87b1-3f6add84f846" "OVERLAY" 
Executing: sh ("/settings/os/Recalbox_-_Pi3/1/partition_setup.sh", "part1=/dev/mmcblk0p6", "id1=LABEL=RECALBOX", "part2=/dev/mmcblk0p7", "id2=UUID=", "part3=/dev/mmcblk0p8", "id3=LABEL=OVERLAY") 
Env: ("partuuid1=PARTUUID=e8954468-06", "partuuid2=PARTUUID=e8954468-07", "id1=LABEL=RECALBOX", "partuuid3=PARTUUID=e8954468-08", "id2=UUID=", "id3=LABEL=OVERLAY", "PATH=/bin:/usr/bin:/sbin:/usr/sbin", "part1=/dev/mmcblk0p6", "part2=/dev/mmcblk0p7", "part3=/dev/mmcblk0p8") 
0 
mount: wrong fs type, bad option, bad superblock on /dev/mmcblk0p7,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.

recovery.cmdline:
runinstaller quiet ramdisk_size=32768 root=/dev/ram0 init=/init vt.cur_default=1 elevator=deadline no_group no_default_source select="allnetwork" disablesdimages alt_image_source=http://pinn.mjh.nz/os_list.json?raspberrypiosfull32-bit=14375&libreelec_rpi2=14375&recalbox-pi3=14375&datapartition=14375 loglevel=2 sdhci.debug_quirks2=4

and i look at os_list.json:
https://pinn.mjh.nz/os_list.json?raspberrypiosfull32-bit=14375&libreelec_rpi2=14375&recalbox-pi3=14375&datapartition=14375

and after partitions.json:
https://pinn.mjh.nz/partitions.json?p=recalbox-pi3&s=14375

The partition SHARE doesn't seem to be in a good fileformat (07 is NTFS no ?!?):

            "empty_fs": true,
            "filesystem_type": "unformatted",
            "label": "SHARE",
            "partition_size_nominal": 10267,
            "partition_type": "07",
            "want_maximised": true

Thank you !

[procount]

I have created an alternative set of meta files to allow PINN to install Recalbox.
Please use the versions called "recalbox-rpiX".
Also use the v3.5.4 of PINN which additionally supports the exfat file system required for recalbox 7 backups.