cable signal

[AlfredoDore]

I bought this cable to connect my GBS-C Mr. Ao to the TV via component, since I'm using VGA, but it's not giving me a signal.
Any tips? (I had the same problem the first time I used VGA too, but I don't know much about cables)

[risingPhil]

I'm not affiliated with the project, but let's do some troubleshooting.

I think such a cable is a bit of an exotic setup, so perhaps we should try focusing on VGA first. If using a normal VGA cable would work, then I'd like to think your cable probably would too.

For further troubleshooting, can you connect a regular VGA cable first?

Anyway, I'm not familiar with this Mr. Ao model. Perhaps you could attach some pictures and any info you have about it?

One thing I know, is that the GBS Control model I own, has a physical switch to switch between HDMI and VGA output. Perhaps yours does as well?

[ramapcsx2]

And look in the settings for something like YPbPr output or YUV output or such. It has to be manually enabled to output that, and not real VGA.

[AlfredoDore]

I'm not affiliated with the project, but let's do some troubleshooting.

I think such a cable is a bit of an exotic setup, so perhaps we should try focusing on VGA first. If using a normal VGA cable would work, then I'd like to think your cable probably would too.

For further troubleshooting, can you connect a regular VGA cable first?

Anyway, I'm not familiar with this Mr. Ao model. Perhaps you could attach some pictures and any info you have about it?

One thing I know, is that the GBS Control model I own, has a physical switch to switch between HDMI and VGA output. Perhaps yours does as well?

I now see that it's RGB but SOG or GOS, the sync signal is on the green screen, so from what I've read, it's my TV that isn't RGB.

[AlfredoDore]

And look in the settings for something like YPbPr output or YUV output or such. It has to be manually enabled to output that, and not real VGA.

I followed the procedure, the problem is that my TV isn't RGB. I'll save it for when I buy a Mister FPGA and connect it to the GBS-C.

[risingPhil]

Can you try to verify that VGA works with another tv / computer monitor with an actual VGA port?

At least then we can rule out a problem/misconfiguration on the GBS Control.

[AlfredoDore]

Can you try to verify that VGA works with another tv / computer monitor with an actual VGA port?

At least then we can rule out a problem/misconfiguration on the GBS Control.

The VGA is working correctly. I use VGA on my TV, which has component and VGA inputs, in addition to composite, RF, and S-Video inputs.