Open
Description
name: Cannot boot md_raid1 from behind PCiE switch
about: md raid1 / partition not bootable when behind ASMedia ASM1182e
Describe the bug
I tried booting md raid1 / on X1005. Dual Patriot P300,
Only / raided, F32 boot partitions not raided (synced via rsync post-initramfs hook). Booting off of SD-card boot sector (mmcblk0p1, wasn't able to boot from either SSD's boot partitions).
To reproduce
layout:
mmcblk0 179:0 0 14.5G 0 disk
└─mmcblk0p1 179:1 0 512M 0 part /boot/firmware
nvme0n1 259:0 0 238.5G 0 disk
├─nvme0n1p1 259:1 0 1G 0 part /boot/firmware2
└─nvme0n1p2 259:2 0 200G 0 part
└─md0 9:0 0 199.9G 0 raid1 /
nvme1n1 259:3 0 238.5G 0 disk
├─nvme1n1p1 259:4 0 1G 0 part /boot/firmware3
└─nvme1n1p2 259:5 0 200G 0 part
└─md0 9:0 0 199.9G 0 raid1 /
rpi-eeprom-config:
[all]
BOOT_UART=1
POWER_OFF_ON_HALT=1
BOOT_ORDER=0xf2614
PCIE_PROBE=1
/etc/mdadm/mdadm.conf
ARRAY /dev/md/0 level=raid1 num-devices=2 metadata=1.2 name=Pi5:0 UUID=647a88d1:61ab498d:7833249d:a3fd4142
blkid /dev/md0:
/dev/md0: UUID="06dadfec-f596-45f6-aa18-8d70049f5916" BLOCK_SIZE="4096" TYPE="ext4"
/boot/firmware/config.txt
...
[all]
dtparam=nvme
usb_max_current_enable=1
/boot/firmware/cmdline.txt
console=serial0,115200 console=tty1 root=UUID=06dadfec-f596-45f6-aa18-8d70049f5916 rootfstype=ext4 fsck.repair=yes rootdelay=5 rootwait
(same result with root=/dev/md0)`
/etc/initramfs-tools/modules md_mod,raid1,ext4
/etc/initramfs-tools/initramfs.conf MODULES=most
Expected behaviour
Bootloader loads / and starts up the OS.
Actual behaviour
File system is mounted read only, kernel panics.
System
- Which model of Raspberry Pi?
Raspberry Pi 5 Model B Rev 1.0 - Which OS and version (
cat /etc/rpi-issue)?Raspberry Pi reference 2024-11-19 - Which firmware version (
vcgencmd version)?2025/02/12 10:51:52 Copyright (c) 2012 Broadcom version f788aab6 (release) (embedded) - Which kernel version (
uname -a)?Linux Pi5 6.6.74+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.74-1+rpt1 (2025-01-27) aarch64 GNU/Linux
Logs
0.37 RPi: BOOTSYS release VERSION:f788aab6 DATE: 2025/02/12 TIME: 10:51:52
0.41 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1739357512 serial c6598744 boardrev d04170 stc 941480
0.51 AON_RESET: 00000003 PM_RSTS 00001000
0.55 POWER_OFF_ON_HALT: 1 WAIT_FOR_POWER_BUTTON 0 power-on-reset 1
0.65 RP1_BOOT chip ID: 0x20001927
0.69 PCIEx1: PWR 0 DET_WAKE 1
0.71 part 00000000 reset_info 00000000
0.73 PMIC reset-event 00000000 rtc 00000000 alarm 00000000 enabled 0
0.79 uSD voltage 3.3V
1.98 Initialising SDRAM rank 2 total-size: 64 Gbit 4267 (0x14 0x00)
1.02 DDR 4267 1 0 64 152 BL:1
2.86 OTP boardrev d04170 bootrom a a
2.87 Customer key hash 0000000000000000000000000000000000000000000000000000000000000000
2.94 VC-JTAG unlocked
3.17 RP1_BOOT chip ID: 0x20001927
3.55 RP1_BOOT chip ID: 0x20001927
3.56 RP1_BOOT: fw size 46888
4.93 PCI2 init
4.93 PCI2 reset
4.38 PCIe scan 00001de4:00000001
4.39 RP1_CHIP_INFO 20001927
4.41 RPi: BOOTLOADER release VERSION:f788aab6 DATE: 2025/02/12 TIME: 10:51:52
4.48 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1739357512 serial c6598744 boardrev d04170 stc 4348944
4.58 PCIEx1: PWR 1 DET_WAKE 1
4.86 usb_pd_init status 0
4.91 XHCI-STOP
4.91 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.95 USBSTS 1
4.98 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.03 xHC0 ports 3 slots 64 intrs 4
4.15 XHCI-STOP
4.15 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.19 USBSTS 11
4.22 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.27 xHC1 ports 3 slots 64 intrs 4
4.35 Boot mode: USB-MSD (04) order f261
4.38 USB3[3] 002a1203 connected enabled
4.39 USB3 root HUB port 3 init
4.44 DEV [01:00] 3.16 000000:03 class 0 VID 0951 PID 1666
4.48 MSD device [01:00] 3.16 000000:03 conf 0 iface 0 ep 81#1024 02#1024
4.55 MSD [01:00] 3.16 000000:03 register MSD
4.36 XHCI-STOP
4.36 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.40 USBSTS 0
4.44 XHCI-STOP
4.44 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.49 USBSTS 18
4.56 XHCI-STOP
4.56 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.61 USBSTS 1
4.63 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.68 xHC0 ports 3 slots 64 intrs 4
4.80 XHCI-STOP
4.80 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.85 USBSTS 19
4.87 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d
4.92 xHC1 ports 3 slots 64 intrs 4
5.04 USB3[3] 002a1203 connected enabled
5.05 USB3 root HUB port 3 init
5.09 DEV [01:00] 3.16 000000:03 class 0 VID 0951 PID 1666
5.13 MSD device [01:00] 3.16 000000:03 conf 0 iface 0 ep 81#1024 02#1024
5.20 MSD [01:00] 3.16 000000:03 register MSD
5.24 MSD [01:00] 3.16 000000:03 LUN 0
5.28 MSD READ_CAPACITY [01:00] 3.16 000000:03 lun 0 block-count 30277632 block-size 512
5.38 MBR: 0x00000800, 2097152 type: 0x0b
5.39 MBR: 0x00000000, 0 type: 0x00
5.43 MBR: 0x00000000, 0 type: 0x00
5.47 MBR: 0x00000000, 0 type: 0x00
5.50 Trying partition: 0
5.53 type: 32 lba: 2048 'mkfs.fat' ' NO NAME ' clusters 261628 (8)
5.59 rsc 32 fat-sectors 2048 root dir cluster 2 sectors 0 entries 0
5.66 FAT32 clusters 261628
5.71 [MSD [01:00] 3.16 000000:03] autoboot.txt not found
5.74 Select partition rsts 0 C(boot_partition) 0 EEPROM config 0 result 1
5.80 Trying partition: 1
5.83 type: 32 lba: 2048 'mkfs.fat' ' NO NAME ' clusters 261628 (8)
5.89 rsc 32 fat-sectors 2048 root dir cluster 2 sectors 0 entries 0
5.96 FAT32 clusters 261628
5.00 Read config.txt bytes 1285 hnd 0x51c5
5.03 [MSD [01:00] 3.16 000000:03] pieeprom.upd not found
5.07 usb_max_current_enable forced to 1
5.14 Read bcm2712-rpi-5-b.dtb bytes 81163 hnd 0x81
5.16 dt-match: compatible: raspberrypi,5-model-b match: brcm,bcm2712
5.22 dt-match: compatible: brcm,bcm2712 match: brcm,bcm2712
5.31 Read /config.txt bytes 1285 hnd 0x51c5
5.34 Read /config.txt bytes 1285 hnd 0x51c5
5.40 MESS:00:00:05.340932:0: Initial voltage 800000 temp 37280
5.41 MESS:00:00:05.541519:0: avs_2712: AVS pred 8741 874100 temp 36730
5.45 MESS:00:00:05.545126:0: vpred 874 mV +0
6.73 MESS:00:00:06.173323:0: FB framebuffer_swap 1
6.93 MESS:00:00:06.193282:0: Select resolution HDMI0/2 hotplug 0 max_mode 2
6.97 MESS:00:00:06.197331:0: Select resolution HDMI1/2 hotplug 0 max_mode 2
6.05 Loading 'initramfs_2712' to 0x00000000 offset 0x0
6.70 Read initramfs_2712 bytes 12407712 hnd 0x5d9c
6.60 MESS:00:00:06.460853:0: dtb_file 'bcm2712-rpi-5-b.dtb'
6.63 Loading 'bcm2712-rpi-5-b.dtb' to 0x00000000 offset 0x100
6.71 Read bcm2712-rpi-5-b.dtb bytes 81163 hnd 0x81
6.05 Read /overlays/overlay_map.dtb bytes 5451 hnd 0x395b
6.69 Read /config.txt bytes 1285 hnd 0x51c5
6.71 MESS:00:00:06.571155:0: dtparam: audio=on
6.80 MESS:00:00:06.580027:0: Unknown dtparam 'audio' - ignored
6.94 Read /overlays/vc4-kms-v3d-pi5.dtbo bytes 3330 hnd 0x39fc
6.37 MESS:00:00:06.637232:0: Loaded overlay 'vc4-kms-v3d-pi5'
6.40 MESS:00:00:06.640164:0: dtparam: nvme=true
6.31 Read /cmdline.txt bytes 153 hnd 0x11a
7.63 BMD "armstub8-2712.bin" not found
7.64 fs_open: 'armstub8-2712.bin'
7.67 Loading 'kernel_2712.img' to 0x00000000 offset 0x200000
7.88 Read kernel_2712.img bytes 9360385 hnd 0x1a10
8.03 PCI1 reset
8.13 PCI2 reset
8.24 set_reboot_order 0
8.24 set_reboot_arg1 0
8.25 USB-OTG disconnect
8.67 MESS:00:00:08.567407:0: Starting OS 8567 ms
8.72 MESS:00:00:08.572925:0: 00000040: -> 00000480
8.74 MESS:00:00:08.574778:0: 00000030: -> 00100080
8.79 MESS:00:00:08.579491:0: 00000034: -> 00100080
8.84 MESS:00:00:08.584203:0: 00000038: -> 00100080
8.88 MESS:00:00:08.588916:0: 0000003c: -> 00100080
NOTICE: BL31: v2.6(release):v2.6-240-gfc45bc492
NOTICE: BL31: Built : 12:55:13, Dec 4 2024
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.6.74+rpt-rpi-2712 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.74-1+rpt1 (2025-01-27)
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000002000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000002000000..0x0000000005ffffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[ 0.000000] OF: reserved mem: 0x000000003fd16600..0x000000003fd16645 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Faking a node at [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Faking a node at [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Faking a node at [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Faking a node at [mem 0x0000000140000000-0x000000017fffffff]
[ 0.000000] Faking a node at [mem 0x0000000180000000-0x00000001bfffffff]
[ 0.000000] Faking a node at [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x3fbfd2c0-0x3fbfffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7fffd2c0-0x7fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xbfffd2c0-0xbfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0xffffd2c0-0xffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x13fffd2c0-0x13fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x17fffd2c0-0x17fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1bfffd2c0-0x1bfffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1ffb892c0-0x1ffb8bfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff]
[ 0.000000] node 1: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] node 2: [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] node 3: [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] node 4: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] node 5: [mem 0x0000000140000000-0x000000017fffffff]
[ 0.000000] node 6: [mem 0x0000000180000000-0x00000001bfffffff]
[ 0.000000] node 7: [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fbfffff]
[ 0.000000] Initmem setup node 1 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 2 [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 3 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 4 [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 5 [mem 0x0000000140000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 6 [mem 0x0000000180000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 7 [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.000000] On node 1, zone DMA: 256 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 14 pages/cpu s184232 r8192 d36952 u229376
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave numa=fake=8 system_heap.max_order=0 smsc95xx.macaddr=2C:CF:67:5C:62:91 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=UUID=06dadfec-f596-45f6-aa18-8d70049f5916 rootfstype=ext4 fsck.mode=force fsck.repair=yes rootdelay=10 rootwait
[ 0.000000] cgroup: Disabling memory control group subsystem
[ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0-7'
[ 0.000000] Fallback order for Node 0: 0 1 2 3 4 5 6 7
[ 0.000000] Fallback order for Node 1: 1 2 3 4 5 6 7 0
[ 0.000000] Fallback order for Node 2: 2 3 4 5 6 7 0 1
[ 0.000000] Fallback order for Node 3: 3 4 5 6 7 0 1 2
[ 0.000000] Fallback order for Node 4: 4 5 6 7 0 1 2 3
[ 0.000000] Fallback order for Node 5: 5 6 7 0 1 2 3 4
[ 0.000000] Fallback order for Node 6: 6 7 0 1 2 3 4 5
[ 0.000000] Fallback order for Node 7: 7 0 1 2 3 4 5 6
[ 0.000000] Built 8 zonelists, mobility grouping on. Total pages: 521985
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[ 0.000000] Memory: 8174928K/8384512K available (13504K kernel code, 2220K rwdata, 4320K rodata, 5120K init, 1216K bss, 144048K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8
[ 0.000000] ftrace: allocating 43544 entries in 43 pages
[ 0.000000] ftrace: allocated 43 pages with 4 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000127] Console: colour dummy device 80x25
[ 0.000130] printk: console [tty1] enabled
[ 0.000334] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000340] pid_max: default: 32768 minimum: 301
[ 0.000430] LSM: initializing lsm=capability,integrity
[ 0.001898] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, vmalloc)
[ 0.002636] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, vmalloc)
[ 0.002675] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc)
[ 0.002697] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc)
[ 0.003296] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.003320] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.003337] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.003383] rcu: Hierarchical SRCU implementation.
[ 0.003385] rcu: Max phase no-delay instances is 1000.
[ 0.003790] EFI services will not be available.
[ 0.003852] smp: Bringing up secondary CPUs ...
[ 0.004016] Detected PIPT I-cache on CPU1
[ 0.004050] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.004192] Detected PIPT I-cache on CPU2
[ 0.004216] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.004334] Detected PIPT I-cache on CPU3
[ 0.004353] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.004375] smp: Brought up 8 nodes, 4 CPUs
[ 0.004387] SMP: Total of 4 processors activated.
[ 0.004391] CPU features: detected: 32-bit EL0 Support
[ 0.004393] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.004396] CPU features: detected: Common not Private translations
[ 0.004399] CPU features: detected: CRC32 instructions
[ 0.004402] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.004404] CPU features: detected: LSE atomic instructions
[ 0.004406] CPU features: detected: Privileged Access Never
[ 0.004408] CPU features: detected: RAS Extension Support
[ 0.004411] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.004441] CPU: All CPU(s) started at EL2
[ 0.004443] alternatives: applying system-wide alternatives
[ 0.006057] devtmpfs: initialized
[ 0.007966] Enabled cp15_barrier support
[ 0.007973] Enabled setend support
[ 0.008024] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008031] futex hash table entries: 1024 (order: 2, 65536 bytes, vmalloc)
[ 0.008212] pinctrl core: initialized pinctrl subsystem
[ 0.008298] DMI not present or invalid.
[ 0.008418] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.008806] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.008839] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.008871] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.008897] audit: initializing netlink subsys (disabled)
[ 0.008936] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.009032] thermal_sys: Registered thermal governor 'step_wise'
[ 0.009041] cpuidle: using governor menu
[ 0.009096] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.009117] ASID allocator initialised with 32768 entries
[ 0.009334] Serial: AMBA PL011 UART driver
[ 0.009956] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.010192] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev3
[ 0.010203] printk: console [ttyAMA10] enabled
[ 1.006230] raspberrypi-firmware soc:firmware: Attached to firmware from 2025-02-12T10:51:52, variant start_cd
[ 1.020279] raspberrypi-firmware soc:firmware: Firmware hash is f788aab600000000000000000000000000000000
[ 1.034621] /axi/pcie@120000/rp1: Fixed dependency cycle(s) with /axi/pcie@120000/rp1
[ 1.042542] /axi/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /axi/interrupt-controller@7fff9000
[ 1.053029] /axi/pcie@120000/rp1: Fixed dependency cycle(s) with /axi/pcie@120000/rp1
[ 1.061473] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 1.068550] Modules: 0 pages in range for non-PLT usage
[ 1.068551] Modules: 129400 pages in range for PLT usage
[ 1.078286] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 1.091046] iommu: Default domain type: Translated
[ 1.095935] iommu: DMA domain TLB invalidation policy: strict mode
[ 1.102206] SCSI subsystem initialized
[ 1.105988] usbcore: registered new interface driver usbfs
[ 1.111501] usbcore: registered new interface driver hub
[ 1.116840] usbcore: registered new device driver usb
[ 1.121971] pps_core: LinuxPPS API ver. 1 registered
[ 1.126954] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.136126] PTP clock support registered
[ 1.140245] vgaarb: loaded
[ 1.143029] clocksource: Switched to clocksource arch_sys_counter
[ 1.261332] VFS: Disk quotas dquot_6.6.0
[ 1.265279] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 1.272384] FS-Cache: Loaded
[ 1.275305] CacheFiles: Loaded
[ 1.279389] NET: Registered PF_INET protocol family
[ 1.284455] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, vmalloc)
[ 1.293686] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, vmalloc)
[ 1.302361] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, vmalloc)
[ 1.310227] TCP established hash table entries: 65536 (order: 5, 524288 bytes, vmalloc)
[ 1.318441] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, vmalloc)
[ 1.326619] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.333273] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, vmalloc)
[ 1.340922] UDP hash table entries: 4096 (order: 3, 131072 bytes, vmalloc)
[ 1.347886] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, vmalloc)
[ 1.355320] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.361085] RPC: Registered named UNIX socket transport module.
[ 1.367028] RPC: Registered udp transport module.
[ 1.371745] RPC: Registered tcp transport module.
[ 1.376462] RPC: Registered tcp-with-tls transport module.
[ 1.381965] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.388434] PCI: CLS 0 bytes, default 64
[ 1.392471] kvm [1]: IPA Size Limit: 40 bits
[ 1.396774] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[ 1.396786] Trying to unpack rootfs image as initramfs...
[ 1.410937] kvm [1]: vgic interrupt IRQ9
[ 1.414893] kvm [1]: VHE mode initialized successfully
[ 1.420430] Initialise system trusted keyrings
[ 1.427221] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 1.433737] zbud: loaded
[ 1.436578] NFS: Registering the id_resolver key type
[ 1.441660] Key type id_resolver registered
[ 1.445859] Key type id_legacy registered
[ 1.449901] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.456630] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.464113] F2FS not supported on PAGE_SIZE(16384) != 4096
[ 1.469699] Key type asymmetric registered
[ 1.473813] Asymmetric key parser 'x509' registered
[ 1.478725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.486210] io scheduler mq-deadline registered
[ 1.490765] io scheduler kyber registered
[ 1.494841] io scheduler bfq registered
[ 1.503258] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26)
[ 1.512422] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27)
[ 1.519973] Freeing initrd memory: 12096K
[ 1.520190] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28)
[ 1.531882] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29)
[ 1.539634] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30)
[ 1.548761] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31)
[ 1.586718] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.593318] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
[ 1.603929] serial serial0: tty port ttyS0 registered
[ 1.609236] iproc-rng200 107d208000.rng: hwrng registered
[ 1.614691] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 1.623143] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 1.631649] brd: module loaded
[ 1.635657] loop: module loaded
[ 1.638892] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.646227] Loading iSCSI transport class v2.0-870.
[ 1.651699] usbcore: registered new device driver r8152-cfgselector
[ 1.657994] usbcore: registered new interface driver r8152
[ 1.663501] usbcore: registered new interface driver lan78xx
[ 1.669182] usbcore: registered new interface driver smsc95xx
[ 1.674983] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.680845] usbcore: registered new interface driver uas
[ 1.686179] usbcore: registered new interface driver usb-storage
[ 1.692277] mousedev: PS/2 mouse device common for all mice
[ 1.705334] rpi-rtc soc:rpi_rtc: registered as rtc0
[ 1.711609] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:10 UTC (10)
[ 1.719699] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 1.726255] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.734606] sdhci: Secure Digital Host Controller Interface driver
[ 1.740812] sdhci: Copyright(c) Pierre Ossman
[ 1.745208] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.751016] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.757076] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.763547] hid: raw HID events driver (C) Jiri Kosina
[ 1.768718] usbcore: registered new interface driver usbhid
[ 1.774311] usbhid: USB HID core driver
[ 1.778375] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[ 1.786833] NET: Registered PF_PACKET protocol family
[ 1.791921] Key type dns_resolver registered
[ 1.799522] registered taskstats version 1
[ 1.803693] Loading compiled-in X.509 certificates
[ 1.809904] Key type .fscrypt registered
[ 1.813842] Key type fscrypt-provisioning registered
[ 1.819504] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[ 1.826679] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
[ 1.835781] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
[ 1.844113] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
[ 1.852414] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 1.861874] brcm-pcie 1000110000.pcie: Forcing gen 2
[ 1.866962] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
[ 1.873441] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.878955] pci_bus 0000:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
[ 1.889525] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
[ 1.900716] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[ 1.906769] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.912878] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.027034] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC)
[ 2.033688] pci 0000:01:00.0: [1b21:1182] type 01 class 0x060400
[ 2.039751] pci 0000:01:00.0: enabling Extended Tags
[ 2.044778] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.059035] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.067194] pci 0000:02:03.0: [1b21:1182] type 01 class 0x060400
[ 2.073265] pci 0000:02:03.0: enabling Extended Tags
[ 2.078294] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 2.084551] pci 0000:02:07.0: [1b21:1182] type 01 class 0x060400
[ 2.090621] pci 0000:02:07.0: enabling Extended Tags
[ 2.095649] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
[ 2.102241] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.110282] pci 0000:02:07.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.118379] pci 0000:03:00.0: [1e4b:1202] type 00 class 0x010802
[ 2.124427] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 2.131386] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 2.137554] pci 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 2.163052] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 2.169756] pci 0000:04:00.0: [1e4b:1202] type 00 class 0x010802
[ 2.175806] pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 2.182768] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 2.188944] pci 0000:04:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 2.215044] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 2.221692] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 04
[ 2.228340] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04
[ 2.234986] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b80000000-0x1b801fffff]
[ 2.242156] pci 0000:01:00.0: BAR 8: assigned [mem 0x1b80000000-0x1b801fffff]
[ 2.249323] pci 0000:02:03.0: BAR 8: assigned [mem 0x1b80000000-0x1b800fffff]
[ 2.256488] pci 0000:02:07.0: BAR 8: assigned [mem 0x1b80100000-0x1b801fffff]
[ 2.263652] pci 0000:03:00.0: BAR 0: assigned [mem 0x1b80000000-0x1b80003fff 64bit]
[ 2.271346] pci 0000:02:03.0: PCI bridge to [bus 03]
[ 2.276330] pci 0000:02:03.0: bridge window [mem 0x1b80000000-0x1b800fffff]
[ 2.283506] pci 0000:04:00.0: BAR 0: assigned [mem 0x1b80100000-0x1b80103fff 64bit]
[ 2.291204] pci 0000:02:07.0: PCI bridge to [bus 04]
[ 2.296186] pci 0000:02:07.0: bridge window [mem 0x1b80100000-0x1b801fffff]
[ 2.303354] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 2.308597] pci 0000:01:00.0: bridge window [mem 0x1b80000000-0x1b801fffff]
[ 2.315765] pci 0000:00:00.0: PCI bridge to [bus 01-04]
[ 2.321007] pci 0000:00:00.0: bridge window [mem 0x1b80000000-0x1b801fffff]
[ 2.328172] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.336649] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.345128] pci 0000:02:03.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.353607] pci 0000:03:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.362084] pci 0000:02:07.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.370562] pci 0000:04:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.379076] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 2.385216] pcieport 0000:00:00.0: PME: Signaling with IRQ 38
[ 2.391020] pcieport 0000:00:00.0: AER: enabled with IRQ 38
[ 2.396656] pcieport 0000:01:00.0: enabling device (0000 -> 0002)
[ 2.402862] pcieport 0000:02:03.0: enabling device (0000 -> 0002)
[ 2.409089] pcieport 0000:02:07.0: enabling device (0000 -> 0002)
[ 2.415360] nvme nvme0: pci function 0000:03:00.0
[ 2.420092] nvme 0000:03:00.0: enabling device (0000 -> 0002)
[ 2.428314] nvme nvme0: missing or invalid SUBNQN field.
[ 2.435076] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 2.441632] hwmon hwmon1: temp2_input not attached to any thermal zone
[ 2.448185] hwmon hwmon1: temp3_input not attached to any thermal zone
[ 2.454747] nvme nvme0: failed to allocate host memory buffer.
[ 2.461778] nvme nvme0: 4/0/0 default/read/poll queues
[ 2.468234] nvme nvme0: Ignoring bogus Namespace Identifiers
[ 2.475859] nvme0n1: p1 p2
[ 2.478876] nvme nvme1: pci function 0000:04:00.0
[ 2.483613] nvme 0000:04:00.0: enabling device (0000 -> 0002)
[ 2.491218] nvme nvme1: missing or invalid SUBNQN field.
[ 2.498025] hwmon hwmon2: temp1_input not attached to any thermal zone
[ 2.504583] hwmon hwmon2: temp2_input not attached to any thermal zone
[ 2.511137] hwmon hwmon2: temp3_input not attached to any thermal zone
[ 2.517695] nvme nvme1: failed to allocate host memory buffer.
[ 2.524024] nvme nvme1: 1/0/0 default/read/poll queues
[ 2.529941] nvme nvme1: Ignoring bogus Namespace Identifiers
[ 2.539839] nvme1n1: p1 p2
[ 2.542794] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[ 2.549796] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
[ 2.558887] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 2.567186] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 2.575487] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 2.583786] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 2.593140] brcm-pcie 1000120000.pcie: Forcing gen 2
[ 2.598146] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00
[ 2.604610] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 2.610116] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 2.620684] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 2.631868] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400
[ 2.637913] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 2.644036] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.759031] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 2.765695] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000
[ 2.771741] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[ 2.778037] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[ 2.784336] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[ 2.790693] pci 0001:01:00.0: supports D1
[ 2.794715] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 2.811036] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.817688] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[ 2.824857] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[ 2.832023] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[ 2.839194] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[ 2.846364] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 2.851346] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
[ 2.858511] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.866987] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.875500] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[ 2.881636] pcieport 0001:00:00.0: PME: Signaling with IRQ 48
[ 2.887437] pcieport 0001:00:00.0: AER: enabled with IRQ 48
[ 2.893079] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 2.902165] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 2.911430] rp1 0001:01:00.0: enabling device (0000 -> 0002)
[ 2.917720] rp1 0001:01:00.0: chip_id 0x20001927
[ 2.926370] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 110
[ 2.954937] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 116 (2c:cf:67:5c:62:91)
[ 2.966707] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 2.975201] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.980286] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 2.987977] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[ 2.996986] xhci-hcd xhci-hcd.0: irq 141, io mem 0x1f00200000
[ 3.002811] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 3.007880] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 3.015129] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 3.021276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 3.029577] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.036827] usb usb1: Product: xHCI Host Controller
[ 3.041722] usb usb1: Manufacturer: Linux 6.6.74+rpt-rpi-2712 xhci-hcd
[ 3.048272] usb usb1: SerialNumber: xhci-hcd.0
[ 3.052828] hub 1-0:1.0: USB hub found
[ 3.056597] hub 1-0:1.0: 2 ports detected
[ 3.060714] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 3.069013] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.076267] usb usb2: Product: xHCI Host Controller
[ 3.081159] usb usb2: Manufacturer: Linux 6.6.74+rpt-rpi-2712 xhci-hcd
[ 3.087780] usb usb2: SerialNumber: xhci-hcd.0
[ 3.092295] hub 2-0:1.0: USB hub found
[ 3.096061] hub 2-0:1.0: 1 port detected
[ 3.100198] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 3.105379] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 3.113058] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[ 3.122161] xhci-hcd xhci-hcd.1: irq 146, io mem 0x1f00300000
[ 3.127982] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 3.133054] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 3.140401] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 3.146541] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 3.154839] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.162186] usb usb3: Product: xHCI Host Controller
[ 3.167079] usb usb3: Manufacturer: Linux 6.6.74+rpt-rpi-2712 xhci-hcd
[ 3.173631] usb usb3: SerialNumber: xhci-hcd.1
[ 3.178249] hub 3-0:1.0: USB hub found
[ 3.182018] hub 3-0:1.0: 2 ports detected
[ 3.186118] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 3.194516] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.201770] usb usb4: Product: xHCI Host Controller
[ 3.206671] usb usb4: Manufacturer: Linux 6.6.74+rpt-rpi-2712 xhci-hcd
[ 3.213346] usb usb4: SerialNumber: xhci-hcd.1
[ 3.217916] hub 4-0:1.0: USB hub found
[ 3.221696] hub 4-0:1.0: 1 port detected
[ 3.226424] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 3.234897] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 3.242940] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 3.250979] platform 1000800000.codec: Adding to iommu group 0
[ 3.256849] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 3.265068] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 3.273282] platform 1000880000.pisp_be: Adding to iommu group 0
[ 3.279329] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 3.287194] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 3.295235] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[ 3.302397] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 3.310839] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 3.318091] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 3.325341] platform axi:gpu: Adding to iommu group 1
[ 3.330425] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 3.337505] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[ 3.344720] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 3.353160] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[ 3.360236] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[ 3.365514] mmc1: CQHCI version 5.10
[ 3.365789] of_cfs_init
[ 3.367213] mmc0: CQHCI version 5.10
[ 3.375165] of_cfs_init: OK
[ 3.378020] clk: Disabling unused clocks
[ 3.410809] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 3.559196] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 3.565766] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 3.576145] Freeing unused kernel memory: 5120K
[ 3.580728] Run /init as init process
[ 3.586948] usb 4-1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 1.10
[ 3.595174] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.595176] usb 4-1: Product: DataTraveler 3.0
[ 3.595178] usb 4-1: Manufacturer: Kingston
[ 3.595179] usb 4-1: SerialNumber: 408D5C15AFB8B231D93A0D83
[ 3.617114] usb-storage 4-1:1.0: USB Mass Storage device detected
[ 3.623341] scsi host0: usb-storage 4-1:1.0
[ 3.640592] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 3.655072] mmc0: new ultra high speed SDR104 SDHC card at address 59b4
[ 3.661988] mmcblk0: mmc0:59b4 14.5 GiB
[ 3.667553] mmcblk0: p1 p2
[ 3.670459] mmcblk0: mmc0:59b4 14.5 GiB
[ 3.686378] input: pwr_button as /devices/platform/pwr_button/input/input0
[ 3.704415] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
[ 3.716118] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
[ 3.767999] md/raid1:md0: not clean -- starting background reconstruction
[ 3.774833] md/raid1:md0: active with 2 out of 2 mirrors
[ 3.781018] md0: detected capacity change from 0 to 419166208
[ 3.891040] raid6: neonx8 gen() 12511 MB/s
[ 3.963038] raid6: neonx4 gen() 10475 MB/s
[ 4.035035] raid6: neonx2 gen() 8094 MB/s
[ 4.107039] raid6: neonx1 gen() 7498 MB/s
[ 4.179037] raid6: int64x8 gen() 5100 MB/s
[ 4.251045] raid6: int64x4 gen() 4889 MB/s
[ 4.323048] raid6: int64x2 gen() 3864 MB/s
[ 4.395037] raid6: int64x1 gen() 3698 MB/s
[ 4.399320] raid6: using algorithm neonx8 gen() 12511 MB/s
[ 4.471034] raid6: .... xor() 8476 MB/s, rmw enabled
[ 4.476015] raid6: using neon recovery algorithm
[ 4.481087] xor: measuring software checksum speed
[ 4.486105] 8regs : 15786 MB/sec
[ 4.490687] 32regs : 15718 MB/sec
[ 4.495211] arm64_neon : 21464 MB/sec
[ 4.499580] xor: using function: arm64_neon (21464 MB/sec)
[ 4.505209] async_tx: api initialized (async)
[ 4.647655] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[ 4.656515] sd 0:0:0:0: [sda] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 4.664299] sd 0:0:0:0: [sda] Write Protect is off
[ 4.669299] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.680220] sda: sda1
[ 4.682650] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 15.166942] md: resync of RAID array md0
[ 15.199599] EXT4-fs (md0): mounted filesystem 06dadfec-f596-45f6-aa18-8d70049f5916 ro with ordered data mode. Quota mode: none.
[ 15.229369] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 15.237058] CPU: 2 PID: 1 Comm: init Not tainted 6.6.74+rpt-rpi-2712 #1 Debian 1:6.6.74-1+rpt1
[ 15.245792] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 15.251644] Call trace:
[ 15.254091] dump_backtrace+0xa0/0x100
[ 15.257851] show_stack+0x20/0x38
[ 15.261171] dump_stack_lvl+0x48/0x60
[ 15.264844] dump_stack+0x18/0x28
[ 15.268165] panic+0x330/0x398
[ 15.271225] do_exit+0x8a0/0x990
[ 15.274458] do_group_exit+0x3c/0xa0
[ 15.278040] __arm64_sys_exit_group+0x20/0x28
[ 15.282408] invoke_syscall+0x50/0x128
[ 15.286167] el0_svc_common.constprop.0+0x48/0xf0
[ 15.290884] do_el0_svc+0x24/0x38
[ 15.294205] el0_svc+0x38/0xd0
[ 15.297265] el0t_64_sync_handler+0x100/0x130
[ 15.301634] el0t_64_sync+0x190/0x198
[ 15.305304] SMP: stopping secondary CPUs
[ 15.309237] Kernel Offset: 0x100004000000 from 0xffffc00080000000
[ 15.315350] PHYS_OFFSET: 0x0
[ 15.318233] CPU features: 0x1,00000001,70028143,0000720b
[ 15.323561] Memory Limit: none
[ 15.326620] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 ]---
Metadata
Metadata
Assignees
Labels
No labels