I just build a setup with a xiaoWa PCB (https://github.com/gargomoma/xiaoWa_pcb), a Nice Nano (clone)
and an E22-400M-30S + SSD 1306.
I tried using the Faketec-Tracker Firmware 1W (just for starting - i know, wrong display-driver),
but I don't get any further than uploading the firmware. If I try to upload a configuration nothing happens,
I don't get the "Data sent"-output from the browser, just nothing,
I also don't see any serial output. Bootlader is 0.92 and working.
Since there is no output at all, I thought maybe the pinout is wrong
(even though on the PCB project description, the author writes the Meshtastic firmware for XiaoWa and Faketec would be identical, so I assumed the pinout would be as well).
I wanted to take a look at the source code, but noticed there is none for NRF, only ESP32. Do you have any insight on what might be the problem? Or maybe the pinout of the Faketec-Firmware, so I might compare?
I just build a setup with a xiaoWa PCB (https://github.com/gargomoma/xiaoWa_pcb), a Nice Nano (clone)
and an E22-400M-30S + SSD 1306.
I tried using the Faketec-Tracker Firmware 1W (just for starting - i know, wrong display-driver),
but I don't get any further than uploading the firmware. If I try to upload a configuration nothing happens,
I don't get the "Data sent"-output from the browser, just nothing,
I also don't see any serial output. Bootlader is 0.92 and working.
Since there is no output at all, I thought maybe the pinout is wrong
(even though on the PCB project description, the author writes the Meshtastic firmware for XiaoWa and Faketec would be identical, so I assumed the pinout would be as well).
I wanted to take a look at the source code, but noticed there is none for NRF, only ESP32. Do you have any insight on what might be the problem? Or maybe the pinout of the Faketec-Firmware, so I might compare?