Support for SH1122 (256 x 64)?

[LongLane]

Hi, great work. I was wondering if you are planning to support SH1122 OLED displays? Here is an example

Datasheet: http://www.farnell.com/datasheets/2822958.pdf

Happy to sponsor one for you.

[rm-hull]

@LongLane Always open to support new devices. Happy to accept screens sent direct to me or donations for devices gratefully received. This one https://www.aliexpress.com/item/32846176247.html may be better as it is on a breakout board and is configured for SPI (the farnell one looks to be I2C, so would be quite a bit slower)

Ping me at rm_hull@yahoo.co.uk and I'll let you know the mailing address or alternatively paypal to that email and I'll order direct from aliexpress

[thijstriemstra]

@LongLane still looking for sponsors, can you give an update?

[LongLane]

Hi, good point, this one had slipped. I had sent a sample over to Richard. @rm-hull, do you have an update? Many thanks

LL

[poulsen93]

Hey @rm-hull, did you ever get display to play with?
I currently looking at this one: AliExpress
And would happily donate one to you if your still interested.

[sukovec]

Hello. I see no progress here, but I managed to have one of these displays working with this library. You can find it here - it's working for me (4 wire SPI), but the code is very messy.

It does not use the possibility to update changed parts of canvas as this display probably does not support same commands as other oled drivers do (or I haven't found it). Feel free to use the code.

Biggest thanks should go here: https://forum.micropython.org/viewtopic.php?f=14&t=9769

[kvandt]

I'd love to use my SH1122 display with luma.oled. Anyone managed to integrate above code of @sukovec in this repo? I'd love to test.

[IamGPIO]

@rm-hull I have a SH1122 (i2c on Pi) I am desperate to get working with the Luma.OLED Library. Would you be interested in looking at this? Happy to send you a screen and pay for your time. I too am in the UK.

Let me know if you can help. Thanks

[Ezlanding1]

Can confirm the SH1122 driver (sh1122.py) works perfectly with everything I've tested it with using the MELIFE SH1122 256x64 OLED SPI. Thank you @sukovec !!

[rickyrickuk]

Can confirm the SH1122 driver (sh1122.py) works perfectly with everything I've tested it with using the MELIFE SH1122 256x64 OLED SPI. Thank you @sukovec !!

Hi, can you advise where the sh1122.py file is please? Trying to get a display working too.
Thanks

[Ezlanding1]

Can confirm the SH1122 driver (sh1122.py) works perfectly with everything I've tested it with using the MELIFE SH1122 256x64 OLED SPI. Thank you @sukovec !!

Hi, can you advise where the sh1122.py file is please? Trying to get a display working too. Thanks

The sh1122 driver made by sukovec can be found here, and it can be used like any other luma oled device (https://luma-oled.readthedocs.io/en/latest/python-usage.html)

[rickyrickuk]

Can confirm the SH1122 driver (sh1122.py) works perfectly with everything I've tested it with using the MELIFE SH1122 256x64 OLED SPI. Thank you @sukovec !!

Hi, can you advise where the sh1122.py file is please? Trying to get a display working too. Thanks

The sh1122 driver made by sukovec can be found here, and it can be used like any other luma oled device (https://luma-oled.readthedocs.io/en/latest/python-usage.html)

That's great, thanks so much.
Downloaded and all working perfectly :-)