Position % movement of a ESPSomfy Group within HA

[benkayuk]

I have only 2 roller shades, next to each other in 1 room.

When I did the web-interface ESPSomfy set-up, I configured both shades, and also 1 group containing both of those shades.

I then installed the HA integration, all fine.

I then put the controls on my HA dashboard.....individual shades work perfectly with the up/down/stop buttons, and the % position slider.

The Group also works fine, using the up/down/stop buttons. However, if I use the position % slider on the group....only the 1 shade responds, the other does nothing at all. Why would this be? Let's say I select 50% for the group, I understand it's a bit tricky with timings (one shade is indeed longer than the other), but I would still expect both blinds to respond and go to their respective 50% positions?

My use case is going to be 50% within HA, and 50% within Apple HomeKit (hopefully I can se up HA HomeKit Bridge to see the controls there).

What's the best option, drop the ESPSomfy group completely, and just use groupings within HA and HomeKit?

[tnhmp]

Hi, I have the very same issue and wondering if you have found a solution? Grouping the shades in HA produced the same results.