Add I2C display

[rvdbreemen]

Display for basic information on the print using I2C display.
On display : Date/Time, Uptime, IP address, last error? Boiler modulation?

[DaveDavenport]

We need to decide what to display.
This can be tested on the branch I made. The code should be isolated enough so others can easily tweak it.

[tjfsteele]

The PCB is designed to make adding a 4 pin i2c oled easy to do. Does need software! Tim

…

On Sun, 29 Jan 2023, 11:09 Robert van den Breemen, ***@***.***> wrote: Display for basic information on the print using I2C display. On display : Date/Time, Uptime, IP address, last error? Boiler modulation? — Reply to this email directly, view it on GitHub <#179>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AN3CV4D2QNO4LAYYDDBL3UDWUZFW5ANCNFSM6AAAAAAUKF37SM> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[DaveDavenport]

Code is there now for a small 1.3" oled directly to the header.

[tjfsteele]

Unfortunately some displays come with the pins in the correct order and some don't! Tim

…

On Sun, 29 Jan 2023, 19:28 Dave Davenport, ***@***.***> wrote: Code is there now for a small 1.3" oled directly to the header. — Reply to this email directly, view it on GitHub <#179 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AN3CV4E3CFZNGQOW6MAUPBLWU3AGTANCNFSM6AAAAAAUKF37SM> . You are receiving this because you commented.Message ID: ***@***.***>

[DaveDavenport]

yes, that is annoying yes.. what is worse.. some have an SSD13xx controller, some an SH1106. They live on the same i2c adress , but behave slightly different.
So you get a distorted display if they don't match.

[tjfsteele]

Is there a way to sense that in software?

…

On Sun, 29 Jan 2023, 19:34 Dave Davenport, ***@***.***> wrote: yes, that is annoying yes.. what is worse.. some have an SSD13xx controller, some an SH1106. They live on the same i2c adress , but behave *slightly* different. So you get a distorted display if they don't match. — Reply to this email directly, view it on GitHub <#179 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AN3CV4A7W6VFKR5Q3UP6YYDWU3A3VANCNFSM6AAAAAAUKF37SM> . You are receiving this because you commented.Message ID: ***@***.***>

[DaveDavenport]

Not that I know off. In general I found that the 0.96" have the ssd13xx drivers and the 1.3" have the sh1106 ones.
These are compatible: https://www.tinytronics.nl/shop/en/displays/oled/1.3-inch-oled-display-128*64-pixels-white-i2c

[DaveDavenport]

bar on right is for icons, showing flame/etc. But I need somebody to make the icon.

[tjfsteele]

It would be useful to find out if the oled displays sold by the nodo shop are compatible. Robert has a good flame icon.. Tim

…

On Sun, 29 Jan 2023, 20:07 Dave Davenport, ***@***.***> wrote: bar on right is for icons, showing flame/etc. But I need somebody to make the icon. [image: image] <https://user-images.githubusercontent.com/406245/215352903-ee8e6dd8-2b4e-4caf-b406-39bd016ea4e3.png> [image: image] <https://user-images.githubusercontent.com/406245/215352916-fe31e00f-2ade-4121-8ccb-1c95acc11be6.png> [image: image] <https://user-images.githubusercontent.com/406245/215352975-50192d67-2ec0-4cde-a057-1e899b6eeeab.png> [image: image] <https://user-images.githubusercontent.com/406245/215352989-fe458c37-72a4-4f58-ae2e-2e28654eb5d0.png> — Reply to this email directly, view it on GitHub <#179 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AN3CV4CS5V6JGVWCO4WXQSTWU3EXLANCNFSM6AAAAAAUKF37SM> . You are receiving this because you commented.Message ID: ***@***.***>

[DaveDavenport]

hard to say from the page, it looks like the 0.96" version.

[DaveDavenport]

#178 if anybody wants to test.

[DaveDavenport]

would probably look like this..