TouchScreen.cpp

// Touch screen library with X Y and Z (pressure) readings as well
// as oversampling to avoid 'bouncing'
// (c) ladyada / adafruit
// Code under MIT License
// Code under MIT License

#include "Arduino.h"
#include "pins_arduino.h"

#ifdef __AVR
  #include <avr/pgmspace.h>
#elif defined(ESP8266)
  #include <pgmspace.h>
#endif
#include "TouchScreen.h"

// increase or decrease the touchscreen oversampling. This is a little different than you make think:
// 1 is no oversampling, whatever data we get is immediately returned
// 2 is double-sampling and we only return valid data if both points are the same
// 3+ uses insert sort to get the median value.
// We found 2 is precise yet not too slow so we suggest sticking with it!

#define NUMSAMPLES 2

TSPoint::TSPoint(void) {
  x = y = 0;
}

TSPoint::TSPoint(int16_t x0, int16_t y0, int16_t z0) {
  x = x0;
  y = y0;
  z = z0;
}

bool TSPoint::operator==(TSPoint p1) {
  return  ((p1.x == x) && (p1.y == y) && (p1.z == z));
}

bool TSPoint::operator!=(TSPoint p1) {
  return  ((p1.x != x) || (p1.y != y) || (p1.z != z));
}

#if (NUMSAMPLES > 2)
static void insert_sort(int array[], uint8_t size) {
  uint8_t j;
  int save;
  
  for (int i = 1; i < size; i++) {
    save = array[i];
    for (j = i; j >= 1 && save < array[j - 1]; j--)
      array[j] = array[j - 1];
    array[j] = save; 
  }
}
#endif

TSPoint TouchScreen::getPoint(void) {
  int x, y, z;
  int samples[NUMSAMPLES];
  uint8_t i, valid;

  valid = 1;

  pinMode(_yp, INPUT);
  pinMode(_ym, INPUT);
  pinMode(_xp, OUTPUT);
  pinMode(_xm, OUTPUT);

#if defined (USE_FAST_PINIO)
  *xp_port |= xp_pin;
  *xm_port &= ~xm_pin;
#else
  digitalWrite(_xp, HIGH);
  digitalWrite(_xm, LOW);
#endif

#ifdef __arm__
  delayMicroseconds(20); // Fast ARM chips need to allow voltages to settle
#endif

   for (i=0; i<NUMSAMPLES; i++) {
#if defined (ESP32_WIFI_TOUCH) && defined (ESP32)
     samples[i] = analogRead(aYP);
#else
     samples[i] = analogRead(_yp);
#endif
   }

#if NUMSAMPLES > 2
   insert_sort(samples, NUMSAMPLES);
#endif
#if NUMSAMPLES == 2
   // Allow small amount of measurement noise, because capacitive
   // coupling to a TFT display's signals can induce some noise.
   if (samples[0] - samples[1] < -NOISE_LEVEL || samples[0] - samples[1] > NOISE_LEVEL) {
     valid = 0;
   } else {
     samples[1] = (samples[0] + samples[1]) >> 1; // average 2 samples
   }
#endif

   x = (ADC_MAX-samples[NUMSAMPLES/2]);

   pinMode(_xp, INPUT);
   pinMode(_xm, INPUT);
   pinMode(_yp, OUTPUT);
   pinMode(_ym, OUTPUT);

#if defined (USE_FAST_PINIO)
   *ym_port &= ~ym_pin;
   *yp_port |= yp_pin;
#else
   digitalWrite(_ym, LOW);
   digitalWrite(_yp, HIGH);
#endif

  
#ifdef __arm__
   delayMicroseconds(20); // Fast ARM chips need to allow voltages to settle
#endif

   for (i=0; i<NUMSAMPLES; i++) {
#if defined (ESP32_WIFI_TOUCH) && defined (ESP32)
     samples[i] = analogRead(aXM);
#else
     samples[i] = analogRead(_xm);
#endif
   }

#if NUMSAMPLES > 2
   insert_sort(samples, NUMSAMPLES);
#endif
#if NUMSAMPLES == 2
   // Allow small amount of measurement noise, because capacitive
   // coupling to a TFT display's signals can induce some noise.
   if (samples[0] - samples[1] < -NOISE_LEVEL || samples[0] - samples[1] > NOISE_LEVEL) {
     valid = 0;
   } else {
     samples[1] = (samples[0] + samples[1]) >> 1; // average 2 samples
   }
#endif

   y = (ADC_MAX-samples[NUMSAMPLES/2]);

   // Set X+ to ground
   // Set Y- to VCC
   // Hi-Z X- and Y+
   pinMode(_xp, OUTPUT);
   pinMode(_yp, INPUT);

#if defined (USE_FAST_PINIO)
   *xp_port &= ~xp_pin;
   *ym_port |= ym_pin;
#else
   digitalWrite(_xp, LOW);
   digitalWrite(_ym, HIGH); 
#endif
  

#if defined (ESP32_WIFI_TOUCH) && defined (ESP32)
   int z1 = analogRead(aXM); 
   int z2 = analogRead(aYP);
#else
   int z1 = analogRead(_xm); 
   int z2 = analogRead(_yp);
#endif

   if (_rxplate != 0) {
     // now read the x 
     float rtouch;
     rtouch = z2;
     rtouch /= z1;
     rtouch -= 1;
     rtouch *= x;
     rtouch *= _rxplate;
     rtouch /= ADC_MAX+1;
     
     z = rtouch;
   } else {
     z = (ADC_MAX-(z2-z1));
   }

   if (! valid) {
     z = 0;
   }

   return TSPoint(x, y, z);
}

TouchScreen::TouchScreen(uint8_t xp, uint8_t yp, uint8_t xm, uint8_t ym,
			 uint16_t rxplate=0) {
  _yp = yp;
  _xm = xm;
  _ym = ym;
  _xp = xp;
  _rxplate = rxplate;

#if defined (USE_FAST_PINIO)
  xp_port =  portOutputRegister(digitalPinToPort(_xp));
  yp_port =  portOutputRegister(digitalPinToPort(_yp));
  xm_port =  portOutputRegister(digitalPinToPort(_xm));
  ym_port =  portOutputRegister(digitalPinToPort(_ym));
  
  xp_pin = digitalPinToBitMask(_xp);
  yp_pin = digitalPinToBitMask(_yp);
  xm_pin = digitalPinToBitMask(_xm);
  ym_pin = digitalPinToBitMask(_ym);
#endif

  pressureThreshhold = 10;
}

int TouchScreen::readTouchX(void) {
   pinMode(_yp, INPUT);
   pinMode(_ym, INPUT);
   digitalWrite(_yp, LOW);
   digitalWrite(_ym, LOW);
   
   pinMode(_xp, OUTPUT);
   digitalWrite(_xp, HIGH);
   pinMode(_xm, OUTPUT);
   digitalWrite(_xm, LOW);

#if defined (ESP32_WIFI_TOUCH) && defined (ESP32)
   return (ADC_MAX-analogRead(aYP));
#else
   return (ADC_MAX-analogRead(_yp));
#endif
}


int TouchScreen::readTouchY(void) {
   pinMode(_xp, INPUT);
   pinMode(_xm, INPUT);
   digitalWrite(_xp, LOW);
   digitalWrite(_xm, LOW);
   
   pinMode(_yp, OUTPUT);
   digitalWrite(_yp, HIGH);
   pinMode(_ym, OUTPUT);
   digitalWrite(_ym, LOW);
   
#if defined (ESP32_WIFI_TOUCH) && defined (ESP32)
   return (ADC_MAX-analogRead(aXM));
#else
   return (ADC_MAX-analogRead(_xm));
#endif
}


uint16_t TouchScreen::pressure(void) {
  // Set X+ to ground
  pinMode(_xp, OUTPUT);
  digitalWrite(_xp, LOW);
  
  // Set Y- to VCC
  pinMode(_ym, OUTPUT);
  digitalWrite(_ym, HIGH); 
  
  // Hi-Z X- and Y+
  digitalWrite(_xm, LOW);
  pinMode(_xm, INPUT);
  digitalWrite(_yp, LOW);
  pinMode(_yp, INPUT);
  
#if defined (ESP32_WIFI_TOUCH) && defined (ESP32)
  int z1 = analogRead(aXM); 
  int z2 = analogRead(aYP);
#else
  int z1 = analogRead(_xm); 
  int z2 = analogRead(_yp);
#endif


  if (_rxplate != 0) {
    // now read the x 
    float rtouch;
    rtouch = z2;
    rtouch /= z1;
    rtouch -= 1;
    rtouch *= readTouchX();
    rtouch *= _rxplate;
    rtouch /= ADC_MAX+1;
    
    return rtouch;
  } else {
    return (ADC_MAX-(z2-z1));
  }
}