ESPHome config.yaml

esphome:
  name: cc1101-transceiver
  friendly_name: CC1101 RF Transceiver

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino

wifi: 
  ssid:  !secret wifi_ssid
  password: !secret wifi_password
  
logger:
  hardware_uart: UART0

api:
  encryption:
    key: "vymAf1bZ2nL6bgf0NDXtxg0AdZCXxLggP5r/126us3w="

ota:
  - platform: esphome
    password: ""

web_server:
  port: 80

# Globals to store learned signals
globals:
  - id: learned_code
    type: std::vector<int32_t>
    restore_value: no
  - id: learning_mode
    type: bool
    initial_value: 'false'
  - id: signal_learned
    type: bool
    initial_value: 'false'

# SPI Bus
spi:
  clk_pin: GPIO4
  mosi_pin: GPIO5
  miso_pin: GPIO3

# CC1101 - Dual Pin Mode
cc1101:
  id: cc1101_module
  cs_pin: GPIO0
  frequency: 433.92MHz
  output_power: 10
  modulation_type: ASK/OOK
  symbol_rate: 5000
  filter_bandwidth: 200kHz

# Remote Receiver - connected to GDO2
remote_receiver:
  id: rf_receiver
  pin: GPIO2
  # GPIO2 is a strapping pin on ESP32-C3 (JTAG source selection only, not boot mode).
  tolerance: 50%
  filter: 200us
  dump:
    - raw
  idle: 10ms
  on_raw:
    then:
      - lambda: |-
          // Log as single copyable line for YAML
          std::string code_str = "";
          for (int i = 0; i < x.size(); i++) {
            if (i > 0) code_str += ", ";
            code_str += std::to_string(x[i]);
          }
          ESP_LOGI("raw_code", "Pulses: %d", x.size());
          ESP_LOGI("raw_code", "Copy this line:");
          ESP_LOGI("raw_code", "[%s]", code_str.c_str());
          
          // Learning mode logic
          if (id(learning_mode)) {
            id(learned_code).clear();
            for (int32_t val : x) {
              id(learned_code).push_back(val);
            }
            id(signal_learned) = true;
            id(learning_mode) = false;
            
            std::string preview = "";
            int count = 0;
            for (int32_t val : id(learned_code)) {
              if (count > 0) preview += ", ";
              preview += std::to_string(val);
              count++;
              if (count >= 20) {
                preview += "... (" + std::to_string(id(learned_code).size()) + " total)";
                break;
              }
            }
            
            id(last_signal).publish_state(preview.c_str());
            id(learn_status).publish_state("Signal learned! " + std::to_string(id(learned_code).size()) + " pulses. Select slot to save.");
          }

# Remote Transmitter - connected to GDO0
remote_transmitter:
  id: rf_transmitter
  pin: GPIO1
  carrier_duty_percent: 100%
  on_transmit:
    then:
      - cc1101.begin_tx: cc1101_module
  on_complete:
    then:
      - cc1101.begin_rx: cc1101_module

switch:
  - platform: template
    name: "Learning Mode"
    id: learning_mode_switch
    icon: "mdi:school"
    lambda: 'return id(learning_mode);'
    turn_on_action:
      - lambda: |-
          id(learning_mode) = true;
          id(learn_status).publish_state("Waiting for signal... Press remote now!");
      - logger.log: "Learning mode ON - press your remote"
    turn_off_action:
      - lambda: |-
          id(learning_mode) = false;
          id(learn_status).publish_state("Learning cancelled");
      - logger.log: "Learning mode OFF"

button:
  - platform: restart
    name: "Restart"

  - platform: template
    name: "Learn Signal"
    icon: "mdi:record-rec"
    on_press:
      - switch.turn_on: learning_mode_switch

  - platform: template
    name: "Replay Learned Signal"
    icon: "mdi:replay"
    on_press:
      - lambda: |-
          if (!id(signal_learned) || id(learned_code).empty()) {
            ESP_LOGW("replay", "No signal learned yet!");
            id(learn_status).publish_state("No signal to replay - learn one first!");
            return;
          }
          ESP_LOGI("replay", "Replaying %d pulses...", id(learned_code).size());
          id(learn_status).publish_state("Transmitting...");
      - remote_transmitter.transmit_raw:
          carrier_frequency: 0Hz
          code: !lambda 'return id(learned_code);'
      - lambda: |-
          id(learn_status).publish_state("Signal transmitted!");
          ESP_LOGI("replay", "Replay complete");

  - platform: template
    name: "Replay x3"
    icon: "mdi:replay"
    on_press:
      - lambda: |-
          if (!id(signal_learned) || id(learned_code).empty()) {
            ESP_LOGW("replay", "No signal learned yet!");
            return;
          }
      - repeat:
          count: 3
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: !lambda 'return id(learned_code);'
            - delay: 50ms

  - platform: template
    name: "Clear Learned Signal"
    icon: "mdi:delete"
    on_press:
      - lambda: |-
          id(learned_code).clear();
          id(signal_learned) = false;
          id(last_signal).publish_state("(empty)");
          id(learn_status).publish_state("Signal cleared");
          ESP_LOGI("learn", "Learned signal cleared");

  - platform: template
    name: "TX Test"
    icon: "mdi:access-point"
    on_press:
      - remote_transmitter.transmit_raw:
          carrier_frequency: 0Hz
          code: [500, -500, 500, -500, 500, -500, 500, -500, 500, -500]

  - platform: template
    name: "Power"
    icon: "mdi:power"
    on_press:
      - repeat:
          count: 5
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: [1189, -423, 407, -1204, 1183, -423, 380, -1228, 1183, -421, 1185, -423, 382, -1227, 1185, -422, 1186, -423, 380, -1229, 1181, -424, 381, -1230, 380, -1229, 380, -1229, 1185, -421, 1184, -422, 407, -1204, 381, -1229, 405, -1204, 405, -1203, 403, -1203, 405, -1204, 381, -1229, 1186, -422, 379, -10000]
            - delay: 10ms

  - platform: template
    name: "LED"
    icon: "mdi:led-on"
    on_press:
      - repeat:
          count: 5
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: [1199, -422, 381, -1229, 1185, -420, 381, -1227, 1184, -423, 1186, -423, 381, -1228, 1184, -422, 1185, -423, 406, -1207, 1183, -422, 406, -1203, 379, -1228, 381, -1230, 1183, -422, 1183, -424, 408, -1206, 379, -1227, 380, -1229, 380, -1230, 378, -1228, 379, -1229, 1184, -423, 381, -1229, 377, -10000]
            - delay: 10ms

  - platform: template
    name: "Speed 1"
    icon: "mdi:speedometer-slow"
    on_press:
      - repeat:
          count: 5
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: [1195, -421, 382, -1227, 1185, -423, 381, -1229, 1183, -421, 1184, -422, 382, -1227, 1184, -423, 1188, -421, 406, -1204, 1183, -423, 406, -1207, 379, -1229, 379, -1228, 1183, -421, 1185, -421, 407, -1204, 405, -1204, 404, -1203, 380, -1231, 1185, -420, 1183, -422, 380, -1227, 1182, -421, 380, -10000]
            - delay: 10ms

  - platform: template
    name: "Speed 2"
    icon: "mdi:speedometer-medium"
    on_press:
      - repeat:
          count: 5
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: [1200, -420, 404, -1201, 1184, -421, 406, -1206, 1183, -422, 1187, -421, 405, -1202, 1186, -420, 1185, -423, 408, -1205, 1182, -422, 407, -1204, 406, -1204, 405, -1202, 1187, -421, 1187, -424, 406, -1205, 406, -1203, 405, -1201, 406, -1203, 407, -1203, 1181, -423, 407, -1204, 407, -1206, 403, -10000]
            - delay: 10ms

  - platform: template
    name: "Speed 3"
    icon: "mdi:speedometer"
    on_press:
      - repeat:
          count: 5
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: [1196, -418, 398, -1223, 1182, -421, 380, -1226, 1183, -423, 1186, -422, 379, -1227, 1185, -421, 1185, -424, 381, -1231, 1183, -421, 380, -1231, 378, -1230, 377, -1227, 1184, -421, 1184, -421, 381, -1228, 380, -1227, 383, -1230, 377, -1227, 379, -1229, 403, -1203, 1185, -421, 1184, -420, 377, -10000]
            - delay: 10ms

  - platform: template
    name: "Speed 4"
    icon: "mdi:speedometer"
    on_press:
      - repeat:
          count: 5
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: [1195, -416, 398, -1224, 1183, -420, 380, -1225, 1186, -420, 1182, -422, 405, -1202, 1184, -423, 1187, -421, 380, -1229, 1181, -420, 406, -1206, 379, -1229, 379, -1227, 1182, -420, 1183, -423, 407, -1207, 379, -1229, 379, -1228, 379, -1227, 378, -1230, 1184, -420, 1185, -421, 380, -1228, 377, -10000]
            - delay: 10ms

  - platform: template
    name: "Speed 5"
    icon: "mdi:speedometer"
    on_press:
      - repeat:
          count: 5
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: [1195, -422, 379, -1231, 1184, -422, 380, -1228, 1183, -423, 1184, -422, 405, -1207, 1183, -421, 1184, -423, 406, -1203, 1186, -421, 406, -1205, 379, -1227, 381, -1227, 1184, -423, 1184, -423, 406, -1204, 380, -1228, 406, -1205, 378, -1226, 1185, -423, 1186, -421, 1184, -423, 380, -1231, 377, -10000]
            - delay: 10ms

  - platform: template
    name: "Speed 6"
    icon: "mdi:speedometer"
    on_press:
      - repeat:
          count: 5
          then:
            - remote_transmitter.transmit_raw:
                carrier_frequency: 0Hz
                code: [1201, -418, 377, -1226, 1185, -421, 406, -1202, 1186, -421, 1185, -423, 406, -1206, 1183, -420, 1184, -425, 406, -1206, 1185, -422, 406, -1205, 404, -1202, 407, -1204, 1183, -422, 1182, -423, 408, -1207, 404, -1202, 405, -1202, 406, -1204, 406, -1205, 1184, -422, 1184, -422, 1186, -421, 380, -10000]
            - delay: 10ms

text_sensor:
  - platform: template
    name: "Last Received Signal"
    id: last_signal
    icon: "mdi:signal"

  - platform: template
    name: "Learn Status"
    id: learn_status
    icon: "mdi:information"

sensor:
  - platform: template
    name: "Learned Signal Length"
    id: signal_length
    icon: "mdi:counter"
    unit_of_measurement: "pulses"
    lambda: 'return id(learned_code).size();'
    update_interval: 5s

binary_sensor:
  - platform: template
    name: "Signal Learned"
    icon: "mdi:check-circle"
    lambda: 'return id(signal_learned);'