Skip to content

Commit 3c9f498

Browse files
scottyweiscottywei
committed
Update document and firmwares
1 parent 9cebd93 commit 3c9f498

1 file changed

Lines changed: 34 additions & 14 deletions

File tree

‎index.md‎

Lines changed: 34 additions & 14 deletions
Original file line numberDiff line numberDiff line change
@@ -16,12 +16,9 @@ Welcome to the Skog Reboot, this is an 87% customize keyboard designed by Percen
1616
A Complete Skog Reboot PCB set contains 1 Mainboard, 1 Encoder daughterboard, 1 BLE module daughterboard, and 1 Battery Module board. the BLE module and the Battery module duaghterboards are optional, in case you're not going to use the BLE feature of this board.
1717

1818
### Mainboard
19-
- **Power Switch** is the main switch which controls the power from the battery, this switch is located beside the <kbd>Spacebar</kbd> key switch and indicated with labeled with "ON" and "OFF".
19+
- **Power Switch** is the main switch which controls the power from the battery, this switch is located beside the <kbd>SPACE</kbd> key switch and indicated with labeled with "ON" and "OFF".
2020
>**NOTICE:** The battery still can be charged even if the power switch is OFF.
2121
22-
- **RGB Switch** is the switch that selects the power source for the RGB lights, including backlights, strip lights and logo lights. it's located beside the Power Switch, indicated with "BAT" and "USB". When the switch is in the "BAT" position, the power source of the RGB lights will comes from the battery. In contrast, the power will come from the USB when it's in the "USB" position.
23-
>**NOTICE:** When this switch is in "**BAT**" position and the USB cable is plugged in, the power then will come from the USB. When this switch is in "USB" position and the USB cable is actually not connected, the power source of RGB lights will be thoroughly cut off, this will enhance the battery life in Bluetooth Mode.
24-
2522
- **Reset Button**, indicated with "RESET", press to bring the board into DFU mode.
2623

2724
- **Battery Connector**, This is a 2 pin JST SH connector, connected to the battery module with a 2 pin cable. This board has battery connection safety, if your battery connection is in the wrong polarity, it will prevent burning up the components on the board. But we still highly recommend that you should carefully connect your battery, Might the polarity!
@@ -31,7 +28,14 @@ A Complete Skog Reboot PCB set contains 1 Mainboard, 1 Encoder daughterboard, 1
3128
- **BLE Module Connector**, This is a 10 pin Board-to-Board connector, indicated with a rounded-corner rectangular. When you connect the BLE Module Daughterboard here, please align the edge of the daughterboard to the rectangular mark.
3229

3330
- **RGB Backlights**, There are 92 RGB backlights in total on the board, each key switch has its own RGB backlight, these RGB lights are controlled by 2 IS31FL3737 controllers. You can control the RGB lights by QMK RGB keycodes.
34-
- **RGB Strip and LOGO lights**, These are 10 WS2812 RGB lights, 5 to the Strip light above the arrow keys, and another 5 are under the LOGO on the bottom. They're controlled by key <kbd>F16</kbd>-<kbd>F20</kbd> (This feature is still under development while the writing of this documents).
31+
- **RGB Strip and LOGO lights**, These are 10 WS2812 RGB lights, 5 to the Strip light above the arrow keys, and another 5 are under the LOGO on the bottom. the RGB strip and LOGO lights can be controlled in the "LIGHTING" panel in the VIA.
32+
33+
Additionally, there are some basic control keys for RGB backlights and the RGB strip:
34+
35+
| | Toggle | Mode+ | Mode- | Hue |
36+
| ------: | :-------: | :-------: | :-------: | :------: |
37+
| RGB Backlights | <kbd>F13</kbd> | <kbd>F14</kbd> | <kbd>F15</kbd> | <kbd>F16</kbd> |
38+
| RGB Strip | <kbd>F17</kbd> | <kbd>F18</kbd> | <kbd>F19</kbd> | <kbd>F20</kbd> |
3539

3640
### BLE Module Daugtherboard
3741
Optional module to enable BLE feature for this board, connect to the mainboard via the BLE Module Connector.
@@ -47,12 +51,13 @@ To be done.
4751

4852
## Usage
4953
### USB Mode
50-
The board will preferentially run in USB mode when it is connected to a USB host device via USB cable. Mode switching is under development.
54+
The board will preferentially run in USB mode when it is connected to a USB host device via USB cable.
5155

5256
### Bluetooth Mode
5357
Once the board is powered, either by USB or battery, it will start broadcasting a device named "SKOG REBOOT BLE". To pair the board to your device, you just need to search for "SKOG REBOOT BLE" then pair it in the Bluetooth settings of your device. To unpair the board, just remove it from the paired devices(New unpair method is under development).
5458

55-
The Bluetooth interface of this board only working when your board is paired and no USB cable is connected, once the USB cable is connected, it will preferentially use the USB interface. As mentioned above, mode switching is coming soon.
59+
### Mode Switching
60+
You can toggle the keyboard bwteen USB mode and Bluetooth mode by using command key: <kbd>LShift</kbd>+<kbd>RShift</kbd>+<kbd>B</kbd>
5661

5762
### Bootloader(DFU) Mode
5863
Once you want to upgrade the firmware or reset the EEPROM of the board, you will need to bring the board into bootloader or DFU mode first, and you will do it like this:
@@ -63,7 +68,7 @@ Simpliy Press the "RESET" button on the mainboard.
6368
- Method 2:
6469
1. Turn "OFF" the power switch;
6570
2. Pull out the USB cable (if it is attached);
66-
3. Keep pressing the <kbd>ESC</kbd> and plug the USB cable back in agian.
71+
3. Keep pressing the <kbd>ESC</kbd> and plug the USB cable back in agian, hold the <kbd>ESC</kbd> pressed for at least 2 seconds.
6772

6873
When the board is in DFU mode, you can see the yellow text "Device Connected" on the QMK Toolbox Console.
6974

@@ -82,13 +87,28 @@ To enable Lock Mode, you just need to press <kbd>LShift</kbd>+<kbd>RShift</kbd>+
8287
### VIA
8388
The VIA is a GUI keystroke configurator for QMK keyboards, Please refer to <https://www.youtube.com/watch?v=WZKf2TvUZ7Q> for detail usage.
8489

85-
### Factory Reset
86-
#### Keyboard Factory Reset
87-
To be done.
88-
#### BLE Module Factory Reset
89-
To be done.
90+
91+
### BLE Module Factory Reset
92+
Before performing BLE module reset, you will unpair the keyboard from your Bluetooth host, then keep in the Bluetooth devices searching interface, then press <kbd>LShift</kbd>+<kbd>RShift</kbd>+<kbd>R</kbd>, the device "PERCENT SKOG REBOOT BLE" will disappear for a few seconds then appear agian, check if the name of the device is exactly "PERCENT SKOG REBOOT BLE". If not, press the keys agian until the module is reset with a right name.
9093

9194
### Encoder
9295
The Skog Reboot comes with a rotary encoder, which can bring interesting usage for you. There are 3 operations for this encoder: Clockwise Rotation, Counter-Clockwise Rotation, and Press. All these operations are programmable in the VIA. To the right of the VIA keymap of Skog Reboot, there are 3 keys, One in normal size and two in a smaller size. The normal one stands for the Press of the encoder, the upper smaller key stands for the Clockwise Rotation and the lower one stands for Counter-Clockwise Rotation. You can programm all these 3 operations with any keycodes, it's time to use your imagination now. Here are some examples might that inspire you:
9396

94-
**Cursor Locator:** Program the clockwise and counter-clockwise to Left and Right in layer 0, to Up and Down in layer 1, then program the Press to MO(1) which can momentarily turn layer 1 on. Then you got a cursor locator that can fast locate the cursor by rotating, move the cursor to left or right by rotating clockwise or counter-clockwise, move the cursor up or down by keep pressing while rotating. This could be very useful when you're coding or using spreadsheets.
97+
**Cursor Locator:** Program the clockwise and counter-clockwise to Left and Right in layer 0, to Up and Down in layer 1, then program the Press to MO(1) which can momentarily turn layer 1 on. Then you got a cursor locator that can fast locate the cursor by rotating, move the cursor to left or right by rotating clockwise or counter-clockwise, move the cursor up or down by keep pressing while rotating. This could be very useful when you're coding or using spreadsheets.
98+
99+
### All Command Keys:
100+
| Command | Function |
101+
| ------------------------------------------------ | ------------------------------------------------------------ |
102+
| <kbd>LShift</kbd>+<kbd>RShift</kbd>+<kbd>G</kbd> | Turn all RGB on |
103+
| <kbd>LShift</kbd>+<kbd>RShift</kbd>+<kbd>H</kbd> | Turn all RGB off |
104+
| <kbd>LShift</kbd>+<kbd>RShift</kbd>+<kbd>V</kbd> | Update the battery level in Windows 10's Bluetooth devices interface, this is not an accurate value |
105+
| <kbd>LSfhit</kbd>+<kbd>RShift</kbd>+<kbd>R</kbd> | Performing a BLE mode factory reset |
106+
| <kbd>LShift</kbd>+<kbd>RShift</kbd>+<kbd>L</kbd> | Turn the keyboard into lock mode. |
107+
108+
----
109+
### Change Logs
110+
Date: 2021-08-2
111+
- RGB strip will turn on as capslock indicator and layer indictor, even the RGB strip is off.
112+
- All the RGB lights will turn off after the keyboard idle for around 60 seconds.
113+
- The keyboard now can be powered and charge by a USB adapter or power bank.
114+
- Better Encoder perform.

0 commit comments

Comments
 (0)