deps: bump golang.org/x/net from 0.50.0 to 0.51.0 #107

Workflow file for this run

.github/workflows/integration-tests.yml at fb6ce19

	name: Integration Tests

	on:
	push:
	branches: [ main, master ]
	pull_request:
	branches: [ main, master ]
	workflow_dispatch: # Allow manual trigger

	concurrency:
	group: ${{ github.workflow }}-${{ github.ref }}
	cancel-in-progress: true

	permissions:
	contents: read

	defaults:
	run:
	working-directory: test/integration

	jobs:
	integration-tests:
	name: Integration Tests
	runs-on: ubuntu-22.04
	timeout-minutes: 30

	steps:
	- name: Check out code
	uses: actions/checkout@v6

	- name: Set up Go
	uses: actions/setup-go@v6
	with:
	go-version: '1.26'

	- name: Build seaweed-up binary
	working-directory: .
	run: go build -v -o seaweed-up .

	- name: Create Docker network
	run: \|
	docker network create --driver bridge --subnet 172.28.0.0/16 seaweed-up-net

	- name: Start containers with docker run
	run: \|
	# Use docker run with --cgroupns=host which is required for systemd on GitHub Actions
	docker run -d \
	--name seaweed-up-host1 \
	--hostname host1 \
	--privileged \
	--cgroupns=host \
	--network seaweed-up-net \
	--ip 172.28.0.10 \
	-v /sys/fs/cgroup:/sys/fs/cgroup:rw \
	geerlingguy/docker-ubuntu2204-ansible:latest

	docker run -d \
	--name seaweed-up-host2 \
	--hostname host2 \
	--privileged \
	--cgroupns=host \
	--network seaweed-up-net \
	--ip 172.28.0.11 \
	-v /sys/fs/cgroup:/sys/fs/cgroup:rw \
	geerlingguy/docker-ubuntu2204-ansible:latest

	docker run -d \
	--name seaweed-up-host3 \
	--hostname host3 \
	--privileged \
	--cgroupns=host \
	--network seaweed-up-net \
	--ip 172.28.0.12 \
	-v /sys/fs/cgroup:/sys/fs/cgroup:rw \
	geerlingguy/docker-ubuntu2204-ansible:latest

	# Wait for containers to start
	echo "Waiting for containers to start..."
	sleep 10

	echo "=== Container Status ==="
	docker ps -a

	# Check if containers are running
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	status=$(docker inspect -f '{{.State.Status}}' $host 2>/dev/null \|\| echo "not found")
	echo "Container $host status: $status"
	if [ "$status" != "running" ]; then
	echo "=== Logs for $host ==="
	docker logs $host 2>&1 \|\| true
	echo "=== Inspect $host ==="
	docker inspect $host 2>&1 \| head -80 \|\| true
	exit 1
	fi
	done

	# Wait for systemd to be ready in each container
	echo "Waiting for systemd to initialize..."
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo "Checking systemd on $host..."
	for i in {1..60}; do
	status=$(docker inspect -f '{{.State.Status}}' $host 2>/dev/null \|\| echo "not found")
	if [ "$status" != "running" ]; then
	echo "Container $host is not running (status: $status)"
	echo "=== Container logs ==="
	docker logs $host 2>&1 \|\| true
	exit 1
	fi

	state=$(docker exec $host systemctl is-system-running 2>/dev/null \|\| echo "starting")
	if [ "$state" = "running" ] \|\| [ "$state" = "degraded" ]; then
	echo "Systemd ready on $host (state: $state)"
	break
	fi
	if [ $i -eq 60 ]; then
	echo "Timeout waiting for systemd on $host"
	echo "=== Container logs ==="
	docker logs $host 2>&1 \|\| true
	echo "=== Systemd status ==="
	docker exec $host systemctl status 2>&1 \|\| true
	echo "=== Journal ==="
	docker exec $host journalctl -xe --no-pager 2>&1 \| tail -100 \|\| true
	exit 1
	fi
	echo "Waiting for systemd on $host... ($i/60, state: $state)"
	sleep 2
	done
	done

	- name: Install SSH on containers
	run: \|
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo "Installing SSH on $host..."
	docker exec $host bash -c "apt-get update && DEBIAN_FRONTEND=noninteractive apt-get install -y openssh-server curl netcat-openbsd"
	docker exec $host bash -c "mkdir -p /run/sshd"
	docker exec $host bash -c "sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config"
	docker exec $host bash -c "sed -i 's/#PasswordAuthentication yes/PasswordAuthentication yes/' /etc/ssh/sshd_config"
	docker exec $host bash -c "systemctl enable ssh && systemctl start ssh"
	echo "SSH installed and started on $host"
	done

	# Wait for SSH to be ready
	echo "Waiting for SSH to be ready..."
	sleep 5
	for ip in 172.28.0.10 172.28.0.11 172.28.0.12; do
	for j in {1..30}; do
	if nc -z $ip 22 2>/dev/null; then
	echo "SSH ready on $ip"
	break
	fi
	if [ $j -eq 30 ]; then
	echo "SSH not ready on $ip after 30 attempts"
	exit 1
	fi
	sleep 1
	done
	done

	- name: Setup SSH keys
	run: \|
	mkdir -p .ssh
	ssh-keygen -t rsa -b 2048 -f .ssh/id_rsa_test -N "" -q

	# Read public key content
	PUB_KEY=$(cat .ssh/id_rsa_test.pub)

	# Copy public key to all hosts using docker exec (more reliable than docker cp)
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo "Setting up SSH key on $host..."
	docker exec $host bash -c "mkdir -p /root/.ssh && chmod 700 /root/.ssh"
	docker exec $host bash -c "echo '$PUB_KEY' > /root/.ssh/authorized_keys"
	docker exec $host bash -c "chmod 600 /root/.ssh/authorized_keys && chown root:root /root/.ssh/authorized_keys"
	# Verify the key was written correctly
	docker exec $host bash -c "cat /root/.ssh/authorized_keys \| head -c 50"
	echo ""
	done

	- name: Verify SSH connectivity
	run: \|
	for ip in 172.28.0.10 172.28.0.11 172.28.0.12; do
	echo "Testing SSH to $ip..."
	ssh -i .ssh/id_rsa_test -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o ConnectTimeout=10 root@$ip "echo 'SSH OK to $ip'"
	done

	- name: Run single-node deployment test
	run: \|
	../../seaweed-up cluster deploy test-single \
	-f testdata/cluster-single.yaml \
	-u root \
	--identity .ssh/id_rsa_test \
	--yes

	# Wait for services to start
	sleep 15

	# Verify master is running
	nc -z 172.28.0.10 9333 \|\| (echo "Master not running" && exit 1)
	echo "Master server verified running"

	- name: Check cluster status
	run: \|
	../../seaweed-up cluster status test-single \|\| true
	../../seaweed-up cluster list \|\| true

	# Note: Go integration tests are skipped in CI because they use docker-compose
	# which conflicts with the network created by the shell-based tests above.
	# The shell-based tests provide equivalent coverage.

	- name: Save logs
	if: always()
	run: \|
	echo "=== Container Status ===" > docker-compose.log
	docker ps -a >> docker-compose.log

	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo "=== Logs for $host ===" >> docker-compose.log
	docker logs $host >> docker-compose.log 2>&1 \|\| true
	done

	echo "=== Host1 Processes ===" >> docker-compose.log
	docker exec seaweed-up-host1 ps aux >> docker-compose.log 2>&1 \|\| true

	echo "=== Host1 SeaweedFS Logs ===" >> docker-compose.log
	docker exec seaweed-up-host1 cat /opt/seaweed/*.log >> docker-compose.log 2>&1 \|\| true

	- name: Archive logs
	if: always()
	uses: actions/upload-artifact@v7
	with:
	name: integration-test-logs
	path: test/integration/docker-compose.log
	retention-days: 7

	- name: Cleanup
	if: always()
	run: \|
	docker stop seaweed-up-host1 seaweed-up-host2 seaweed-up-host3 \|\| true
	docker rm seaweed-up-host1 seaweed-up-host2 seaweed-up-host3 \|\| true
	docker network rm seaweed-up-net \|\| true
	rm -rf .ssh

	multi-node-test:
	name: Multi-Node Deployment Test
	runs-on: ubuntu-22.04
	timeout-minutes: 30
	needs: integration-tests # Run after single-node test

	steps:
	- name: Check out code
	uses: actions/checkout@v6

	- name: Set up Go
	uses: actions/setup-go@v6
	with:
	go-version: '1.26'

	- name: Build seaweed-up binary
	working-directory: .
	run: go build -v -o seaweed-up .

	- name: Create Docker network
	working-directory: test/integration
	run: \|
	docker network create --driver bridge --subnet 172.28.0.0/16 seaweed-up-net

	- name: Start containers with docker run
	working-directory: test/integration
	run: \|
	# Use docker run with --cgroupns=host which is required for systemd on GitHub Actions
	docker run -d \
	--name seaweed-up-host1 \
	--hostname host1 \
	--privileged \
	--cgroupns=host \
	--network seaweed-up-net \
	--ip 172.28.0.10 \
	-v /sys/fs/cgroup:/sys/fs/cgroup:rw \
	geerlingguy/docker-ubuntu2204-ansible:latest

	docker run -d \
	--name seaweed-up-host2 \
	--hostname host2 \
	--privileged \
	--cgroupns=host \
	--network seaweed-up-net \
	--ip 172.28.0.11 \
	-v /sys/fs/cgroup:/sys/fs/cgroup:rw \
	geerlingguy/docker-ubuntu2204-ansible:latest

	docker run -d \
	--name seaweed-up-host3 \
	--hostname host3 \
	--privileged \
	--cgroupns=host \
	--network seaweed-up-net \
	--ip 172.28.0.12 \
	-v /sys/fs/cgroup:/sys/fs/cgroup:rw \
	geerlingguy/docker-ubuntu2204-ansible:latest

	# Wait for containers to start
	echo "Waiting for containers to start..."
	sleep 10

	echo "=== Container Status ==="
	docker ps -a

	# Check if containers are running
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	status=$(docker inspect -f '{{.State.Status}}' $host 2>/dev/null \|\| echo "not found")
	echo "Container $host status: $status"
	if [ "$status" != "running" ]; then
	echo "=== Logs for $host ==="
	docker logs $host 2>&1 \|\| true
	exit 1
	fi
	done

	# Wait for systemd to be ready in each container
	echo "Waiting for systemd to initialize..."
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo "Checking systemd on $host..."
	for i in {1..60}; do
	status=$(docker inspect -f '{{.State.Status}}' $host 2>/dev/null \|\| echo "not found")
	if [ "$status" != "running" ]; then
	echo "Container $host is not running (status: $status)"
	docker logs $host 2>&1 \|\| true
	exit 1
	fi

	state=$(docker exec $host systemctl is-system-running 2>/dev/null \|\| echo "starting")
	if [ "$state" = "running" ] \|\| [ "$state" = "degraded" ]; then
	echo "Systemd ready on $host (state: $state)"
	break
	fi
	if [ $i -eq 60 ]; then
	echo "Timeout waiting for systemd on $host"
	docker logs $host 2>&1 \|\| true
	docker exec $host journalctl -xe --no-pager 2>&1 \| tail -100 \|\| true
	exit 1
	fi
	echo "Waiting for systemd on $host... ($i/60, state: $state)"
	sleep 2
	done
	done

	- name: Install SSH on containers
	run: \|
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo "Installing SSH on $host..."
	docker exec $host bash -c "apt-get update && DEBIAN_FRONTEND=noninteractive apt-get install -y openssh-server curl netcat-openbsd"
	docker exec $host bash -c "mkdir -p /run/sshd"
	docker exec $host bash -c "sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config"
	docker exec $host bash -c "sed -i 's/#PasswordAuthentication yes/PasswordAuthentication yes/' /etc/ssh/sshd_config"
	docker exec $host bash -c "systemctl enable ssh && systemctl start ssh"
	done

	sleep 5
	for ip in 172.28.0.10 172.28.0.11 172.28.0.12; do
	for j in {1..30}; do
	if nc -z $ip 22 2>/dev/null; then
	echo "SSH ready on $ip"
	break
	fi
	sleep 1
	done
	done

	- name: Setup SSH keys
	working-directory: test/integration
	run: \|
	mkdir -p .ssh
	ssh-keygen -t rsa -b 2048 -f .ssh/id_rsa_test -N "" -q

	# Read public key content
	PUB_KEY=$(cat .ssh/id_rsa_test.pub)

	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo "Setting up SSH key on $host..."
	docker exec $host bash -c "mkdir -p /root/.ssh && chmod 700 /root/.ssh"
	docker exec $host bash -c "echo '$PUB_KEY' > /root/.ssh/authorized_keys"
	docker exec $host bash -c "chmod 600 /root/.ssh/authorized_keys && chown root:root /root/.ssh/authorized_keys"
	done

	- name: Run multi-node deployment test
	working-directory: test/integration
	run: \|
	../../seaweed-up cluster deploy test-multi \
	-f testdata/cluster-multi.yaml \
	-u root \
	--identity .ssh/id_rsa_test \
	--yes

	# Debug: show systemd service status on each host
	echo "=== Debugging service status ==="
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo ""
	echo "========== $host =========="
	echo "IP address:"
	docker exec $host hostname -I 2>&1 \|\| true
	echo "Binary check:"
	docker exec $host ls -la /usr/local/bin/weed 2>&1 \|\| echo "weed binary NOT FOUND"
	echo ""
	echo "Systemd services:"
	docker exec $host systemctl list-units 'seaweed*' --all --no-pager 2>&1 \|\| true
	echo ""
	echo "Journal logs for seaweed services:"
	docker exec $host journalctl -u 'seaweed*' --no-pager -n 30 2>&1 \|\| true
	done

	# Give services time to initialize (volume servers need to connect to master)
	echo "Waiting 30 seconds for services to fully initialize..."
	sleep 30

	# Show what ports are listening on each host
	echo "=== Checking listening ports ==="
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo ""
	echo "========== $host =========="
	echo "--- weed processes ---"
	docker exec $host ps aux \| grep -v grep \| grep weed \|\| echo "No weed processes"
	echo "--- listening ports ---"
	docker exec $host ss -tlnp 2>&1 \|\| echo "No ports"
	echo "--- log directory contents ---"
	docker exec $host ls -la /opt/seaweed/*/ 2>&1 \|\| echo "No log dirs"
	echo "--- recent log content ---"
	docker exec $host bash -c "cat /opt/seaweed//.log 2>/dev/null \| tail -50" \|\| echo "No logs"
	done

	# Verify services - fail if any service is not running
	echo "=== Verifying services ==="
	FAILED=0
	nc -z 172.28.0.10 9333 && echo "Master verified on 172.28.0.10:9333" \|\| { echo "Master NOT running"; FAILED=1; }
	nc -z 172.28.0.11 8080 && echo "Volume1 verified on 172.28.0.11:8080" \|\| { echo "Volume1 NOT running"; FAILED=1; }
	nc -z 172.28.0.12 8080 && echo "Volume2 verified on 172.28.0.12:8080" \|\| { echo "Volume2 NOT running"; FAILED=1; }
	nc -z 172.28.0.10 8888 && echo "Filer verified on 172.28.0.10:8888" \|\| { echo "Filer NOT running"; FAILED=1; }

	if [ $FAILED -eq 1 ]; then
	echo "Some services failed to start"
	exit 1
	fi
	echo "All services verified running!"

	- name: List clusters
	working-directory: test/integration
	run: ../../seaweed-up cluster list

	- name: Archive logs
	if: always()
	working-directory: test/integration
	run: \|
	echo "=== Container Status ===" > multi-node.log
	docker ps -a >> multi-node.log
	for host in seaweed-up-host1 seaweed-up-host2 seaweed-up-host3; do
	echo "=== Logs for $host ===" >> multi-node.log
	docker logs $host >> multi-node.log 2>&1 \|\| true
	done

	- name: Upload logs
	if: always()
	uses: actions/upload-artifact@v7
	with:
	name: multi-node-test-logs
	path: test/integration/multi-node.log
	retention-days: 7

	- name: Cleanup
	if: always()
	working-directory: test/integration
	run: \|
	docker stop seaweed-up-host1 seaweed-up-host2 seaweed-up-host3 \|\| true
	docker rm seaweed-up-host1 seaweed-up-host2 seaweed-up-host3 \|\| true
	docker network rm seaweed-up-net \|\| true
	rm -rf .ssh

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

deps: bump golang.org/x/net from 0.50.0 to 0.51.0 #107

Workflow file

deps: bump golang.org/x/net from 0.50.0 to 0.51.0 #107

Uh oh!

Workflow file for this run