Data: Input, Model Configuration, and Output Files

Attention!

The most up-to-date files are located in the UFS Weather Model Regression Test Data Bucket for the most recent dates listed. File descriptions will appear below, but due to ongoing updates, we cannot guarantee that every file will appear, especially when running different configurations.

The UFS Weather Model can be run in one of several configurations (sometimes referred to as "applications"), from a single-component atmospheric model to a fully coupled model with multiple earth system components (e.g., atmosphere, ocean, sea-ice and mediator). Currently, supported configurations include:

Supported ufs-weather-model applications

Configuration Name	Description
ATM	Standalone Atmospheric Model (:term:`ATM`)
ATMW	:term:`ATM` coupled to :term:`WW3`
ATMAERO	:term:`ATM` coupled to :term:`GOCART`
ATMAQ	:term:`ATM` coupled to :term:`AQM`
ATML	:term:`ATM` coupled to :term:`NOAHMP`
ATMF	:term:`ATM` coupled to the Community Fire Behavior Model (aka :term:`UFS FIRE`)
ATM_DS2S	Coupled :term:`ATM` - :term:`DOCN` - :term:`DICE` - :term:`CDEPS`
ATM_DS2S-PCICE	Coupled :term:`ATM` - :term:`DOCN` - :term:`CICE6` (prescribed ice mode) - :term:`CDEPS`
S2S	Coupled :term:`ATM` - :term:`MOM6` - :term:`CICE6` - :term:`CMEPS`
S2SA	Coupled :term:`ATM` - :term:`MOM6` - :term:`CICE6` - :term:`GOCART` - :term:`CMEPS`
S2SW	Coupled :term:`ATM` - :term:`MOM6` - :term:`CICE6` - :term:`WW3` - :term:`CMEPS`
S2SWA	Coupled :term:`ATM` - :term:`MOM6` - :term:`CICE6` - :term:`GOCART` - :term:`WW3` - :term:`CMEPS`
S2SWAL	Coupled :term:`ATM` - :term:`MOM6` - :term:`CICE6` - :term:`GOCART` - :term:`WW3` - :term:`CMEPS` - :term:`NOAHMP`
NG-GODAS	Coupled :term:`CDEPS` - :term:`DATM` - :term:`MOM6` - :term:`CICE6` - :term:`CMEPS`
LND	Coupled :term:`CDEPS` - :term:`DATM` - :term:`NOAHMP`
LND-LM4	Coupled :term:`CDEPS` - :term:`DATM` - :term:`LM4`
HAFS	Coupled :term:`ATM` - :term:`HYCOM` - :term:`CMEPS`
HAFSW	Coupled :term:`ATM` - :term:`HYCOM` - :term:`WW3` - :term:`CMEPS`
HAFS-MOM6W	Coupled :term:`ATM` - :term:`MOM6`- :term:`WW3` - :term:`CMEPS`
HAFS-ALL	Coupled :term:`CDEPS` - :term:`ATM` - :term:`HYCOM` - :term:`WW3` - :term:`CMEPS`

This chapter describes the input and output files needed for executing the model in the various supported configurations (see :numref:`Table %s <UFS-configurations>`). Each of the component models for a given configuration requires specific input files, and each component model outputs a particular set of files. Each configuration requires a set of model configuration files, as well. This chapter describes the input and output files involved with each component model. It also discusses the various configuration files involved in running the model. Users will need to view the input file requirements for each component model involved in the configuration they are running. For example, users running the S2S configuration would need to gather input data required for the ATM, MOM6, and CICE6 component models. Then, they would need to alter certain model configuration files to reflect the ufs-weather-model configuration that they plan to run.

Input files

There are three types of files needed to execute a run:

Static datasets (fix files containing climatological information)

Files that depend on grid resolution and initial/boundary conditions

Model configuration files (such as namelists)

Information on the first two types of file appears in detail below for each component model. Information on Model Configuration files can be viewed in :numref:`Section %s <model-config-files>`.

ATM

Static Datasets (i.e., fix files)

The static input files for global configurations are listed and described in :numref:`Table %s <FixFiles>`. Similar files are used for a regional grid but are grid-specific and generated by pre-processing utilities (e.g., UFS_UTILS).

Fix files containing climatological information

Filename	Description
aerosol.dat	External aerosols data file
CCN_ACTIVATE.BIN	Cloud condensation nuclei activation binary file
CFSR.SEAICE.1982.2012.monthly.clim.grb	:term:`CFS <CFSR>` reanalysis of monthly sea ice climatology
freezeH2O.dat	Defines freezing behavior of water under different temperatures and pressures
co2historicaldata_YYYY.txt	Monthly CO2 in PPMV data for year YYYY
global_albedo4.1x1.grb	Four albedo fields for seasonal mean climatology: 2 for strong zenith angle dependent (visible and near IR) and 2 for weak zenith angle dependent
global_glacier.2x2.grb	Glacier points, permanent/extreme features
global_h2oprdlos.f77	Coefficients for the parameterization of photochemical production and loss of water (H2O)
global_maxice.2x2.grb	Maximum ice extent, permanent/extreme features
global_mxsnoalb.uariz.t126.384.190.rg.grb	Climatological maximum snow albedo
global_o3prdlos.f77	Monthly mean ozone coefficients
global_shdmax.0.144x0.144.grb	Climatological maximum vegetation cover
global_shdmin.0.144x0.144.grb	Climatological minimum vegetation cover
global_slope.1x1.grb	Climatological slope type
global_snoclim.1.875.grb	Climatological snow depth
global_snowfree_albedo.bosu.t126.384.190.rg.grb	Climatological snowfree albedo
global_soilmgldas.t126.384.190.grb	Climatological soil moisture
global_soiltype.statsgo.t126.384.190.rg.grb	Soil type from the STATSGO dataset
global_tg3clim.2.6x1.5.grb	Climatological deep soil temperature
global_vegfrac.0.144.decpercent.grb	Climatological vegetation fraction
global_vegtype.igbp.t126.384.190.rg.grb	Climatological vegetation type
global_zorclim.1x1.grb	Climatological surface roughness
IMS-NIC.blended.ice.monthly.clim.grb	Monthly climatology of global sea ice concentration from blended :term:`IMS` and :term:`NIC` datasets
qr_acr_qgV2.dat	Precomputed data for rain-graupel collection processes
qr_acr_qsV2.dat:	Precomputed data for rain–snow collection processes
RTGSST.1982.2012.monthly.clim.grb	Monthly, climatological, real-time global sea surface temperature
seaice_newland.grb	High resolution land mask
sfc_emissivity_idx.txt	External surface emissivity data table
solarconstant_noaa_an.txt	External solar constant data table

Grid Description and Initial Condition Files

The input files containing grid information and the initial conditions for global configurations are listed and described in :numref:`Table %s <GridICFiles>`. The input files for a limited area model (LAM) configuration, including grid information and initial and lateral boundary conditions, are listed and described in :numref:`Table %s <RegionalGridICFiles>`. Note that the regional grid is referred to as Tile 7 here, and it is generated by several pre-processing utilities.

Input files containing grid information and initial conditions for global configurations

Filename	Description	Date-dependent
Cxx_grid.tile[1-6].nc	Cxx grid information for tiles 1-6, where 'xx' is the grid number
gfs_ctrl.nc	NCEP NGGPS tracers, ak, and bk	✔
gfs_data.tile[1-6].nc	Initial condition fields (ps, u, v, u, z, t, q, O3). May include spfo3, spfo, spf02 if multiple gases are used	✔
oro_data.tile[1-6].nc	Model terrain (topographic/orographic information) for grid tiles 1-6
sfc_ctrl.nc	Control parameters for surface input: forecast hour, date, number of soil levels
sfc_data.tile[1-6].nc	Surface properties for grid tiles 1-6	✔

Regional input files containing grid information and initial and lateral boundary conditions for regional configurations

Filename	Description	Date-dependent
Cxx_grid.tile7.nc	Cxx grid information for tile 7, where 'xx' is the grid number
gfs_ctrl.nc	NCEP NGGPS tracers, ak, and bk	✔
gfs_bndy.tile7.HHH.nc	Lateral boundary conditions at hour HHH	✔
gfs_data.tile7.nc	Initial condition fields (ps, u, v, u, z, t, q, O3). May include spfo3, spfo, spf02 if multiple gases are used	✔
oro_data.tile7.nc	Model terrain (topographic/orographic information) for grid tile 7
sfc_ctrl.nc	Control parameters for surface input: forecast hour, date, number of soil levels
sfc_data.tile7.nc	Surface properties for grid tile 7	✔

MOM6

Static Datasets (i.e., fix files)

The static input files for global configurations are listed and described in :numref:`Table %s <MOM6_FixFiles>`. Note that not all files are required for all resolutions.

Fix files containing climatological information

Filename	Description	Used in resolution
runoff.daitren.clim.1440x1080.v20180328.nc	climatological runoff	0.25
runoff.daitren.clim.720x576.v20180328.nc	climatological runoff	0.50
runoff.daitren.iaf.720x576.v20180328.nc	interannually varying runoff forcing	0.50
seawifs-clim-1997-2010.1440x1080.v20180328.nc	climatological chlorophyll concentration in sea water	0.25
seawifs-clim-1997-2010.720x576.v20180328.nc	climatological chlorophyll concentration in sea water	0.50
seawifs_1998-2006_smoothed_2X.nc	climatological chlorophyll concentration in sea water	1.00
tidal_amplitude.v20140616.nc	climatological tide amplitude	0.25
tidal_amplitude.nc	climatological tide amplitude	0.50, 1.00
geothermal_davies2013_v1.nc	climatological geothermal heat flow	0.50, 0.25
KH_background_2d.nc	climatological 2-d background harmonic viscosities	1.00
salt_restore_PHC2.720x576.v20180405.nc	climatological salinity restoring field (PHC source)	0.50

Grid Description and Initial Condition Files

The input files containing grid information and the initial conditions for global configurations are listed and described in :numref:`Table %s <MOM6_GridICFiles>`.

Input files containing grid information and initial conditions for global configurations

Filename	Description	Valid resolution options	Date-dependent
ocean_hgrid.nc	horizonal grid information	9.00, 5.00, 1.00, 0.50, 0.25
oceanda_zgrid_25L.nc	defines the vertical z-coordinate depth structure for 25 ocean layers used in data assimilation	5.00
vgrid_75_2m.nc	vertical grid levels	1.00
ocean_mosaic.nc	specify horizonal starting and ending points index	9.00, 5.00, 1.00, 0.50, 0.25
ocean_topog.nc	ocean topography	0.50, 0.25
ocean_mask.nc	ocean mask	9.00, 5.00, 1.00, 0.50, 0.25
ocean_static.nc	static ocean grid and mask data	0.50
land_mosaic_tile1Xocean_mosaic_tile1.nc	land/ocean mosaic tiles	1.00, 0.50
atmos_mosaic_tile1Xland_mosaic_tile1.nc	atmosphere/land mosaic tiles	1.00
atmos_mosaic_tile1Xocean_mosaic_tile1.nc	atmosphere/ocean mosaic tiles	1.00
land_mask.nc	land mask	1.00, 0.50
basin_codes.nc	ocean basin classification grid	0.50
hycom1_25.nc	vertical coordinate thickness defining 25 vertical levels	9.00, 5.00
hycom1_75_800m.nc	vertical coordinate level thickness	1.00, 0.50, 0.25
layer_coord.nc	vertical layer target potential density	1.00, 0.50, 0.25
layer_coord25.nc	vertical layer target potential density defining 25 vertical levels	9.00, 5.00
All_edits.nc	specify grid points where topography are manually modified to adjust throughflow strength for narrow channels	0.25
topo_edits_011818.nc	specify grid points where topography are manually modified to adjust throughflow strength for narrow channels	1.00
ufs.topo_edits_011818.nc	UFS specific grid points where topography are manually modified to adjust throughflow strength for narrow channels	1.00
topog.nc	topography	9.00, 1.00, 0.25
MOM_channels_global_025	specifies restricted channel widths	0.50, 0.25
MOM_layout	specifies parameters for testing mask_tables in a non-FRE enviroment (production use is not recommended )	0.50, 0.25
MOM_override	blank file for overriding default MOM6 parameters	9.00, 5.00, 1.00, 0.50, 0.25
MOM_channels_SPEAR	specifies restricted channel widths	1.00
interpolate_zgrid_40L.nc	specify target depth for output	1.00, 0.50, 0.25
MOM.res*nc	ocean initial conditions (from CPC ocean DA)	0.25	✔
MOM6_IC_TS.nc	ocean temperature and salinity initial conditions (from :term:`CFSR`)	1.00, 0.50, 0.25	✔
woa18_decav_s00_01.nc	global annual climatological average ocean salinity from 1955–2017 (from :term:`NCEI`)	1.00	✔
woa18_decav_t00_01.nc	global annual climatological average ocean temperature from 1955–2017 (from :term:`NCEI`)	1.00	✔
mom6.mx050.2021032206.warmstart.nc	MOM6 warm restart file	0.50	✔
mom6.mx100.2021032206.warmstart.nc	MOM6 warm restart file	1.00	✔

HYCOM

Static Datasets (i.e., fix files)

Static input files have been created for several regional domains. These domains are listed and described in :numref:`Table %s <HYCOM_DomainIdentifiers>`.

The following table describes each domain identifier.

Identifier	Description
hat10	Hurricane North Atlantic (1/12 degree)
hep20	Hurricane Eastern North Pacific (1/12 degree)
hwp30	Hurricane Western North Pacific (1/12 degree)
hcp70	Hurricane Central North Pacific (1/12 degree)

Static input files are listed and described in :numref:`Table %s <HYCOM_FixFiles>`. Several datasets contain both dot-a (.a) and dot-b (.b) files. Dot-a files contain data written as 32-bit IEEE real values (idm*jdm) and dot-b files contain plain text metadata for each field in the dot-a file.

Fix files containing climatological information

Filename	Description	Domain
:ref:`blkdat.input<HYCOM_BlkdatInput>`	Model input parameters
patch.input	Tile description
ports.input	Open boundary cells
forcing.chl.(a,b)	Chlorophyll (monthly climatology)	hat10, hep20, hwp30, hcp70
forcing.rivers.(a,b)	River discharge (monthly climatology)	hat10, hep20, hwp30, hcp70
iso.sigma.(a,b)	Fixed sigma thickness	hat10, hep20, hwp30, hcp70
regional.depth.(a,b)	Total depth of ocean	hat10, hep20, hwp30, hcp70
regional.grid.(a,b)	Grid information for HYCOM "C" grid	hat10, hep20, hwp30, hcp70
relax.rmu.(a,b)	Open boundary nudging value	hat10, hep20, hwp30, hcp70
relax.ssh.(a,b)	Surface height nudging value (monthly climatology)	hat10, hep20, hwp30, hcp70
tbaric.(a,b)	Thermobaricity correction	hat10, hep20, hwp30, hcp70
thkdf4.(a,b)	Diffusion velocity (m/s) for Laplacian thickness diffusivity	hat10, hep20, hwp30, hcp70
veldf2.(a,b)	Diffusion velocity (m/s) for biharmonic momentum dissipation	hat10, hep20, hwp30, hcp70
veldf4.(a,b)	Diffusion velocity (m/s) for Laplacian momentum dissipation	hat10, hep20, hwp30, hcp70

Grid Description and Initial Condition Files

The input files containing time dependent configuration and forcing data are listed and described in :numref:`Table %s <HYCOM_GridICFiles>`. These files are generated for specific regional domains (see :numref:`Table %s <HYCOM_DomainIdentifiers>`) during ocean prep. When uncoupled, the the forcing data drives the ocean model. When coupled, the forcing data is used to fill in unmapped grid cells. Several datasets contain both dot-a (.a) and dot-b (.b) files. Dot-a files contain data written as 32-bit IEEE real values (idm*jdm) and dot-b files contain plain text metadata for each field in the dot-a file.

Input files containing grid information, initial conditions, and forcing data for regional configurations.

Filename	Description	Domain	Date-dependent
limits	Model begin and end time (since HYCOM epoch)		✔
forcing.airtmp.(a,b)	GFS forcing data for 2m air temperature	hat10, hep20, hwp30, hcp70	✔
forcing.mslprs.(a,b)	GFS forcing data for mean sea level pressure (symlink)	hat10, hep20, hwp30, hcp70	✔
forcing.precip.(a,b)	GFS forcing data for precipitation rate	hat10, hep20, hwp30, hcp70	✔
forcing.presur.(a,b)	GFS forcing data for mean sea level pressure	hat10, hep20, hwp30, hcp70	✔
forcing.radflx.(a,b)	GFS forcing data for total radiation flux	hat10, hep20, hwp30, hcp70	✔
forcing.shwflx.(a,b)	GFS forcing data for net downward shortwave radiation flux	hat10, hep20, hwp30, hcp70	✔
forcing.surtmp.(a,b)	GFS forcing data for surface temperature	hat10, hep20, hwp30, hcp70	✔
forcing.tauewd.(a,b)	GFS forcing data for eastward momentum flux	hat10, hep20, hwp30, hcp70	✔
forcing.taunwd.(a,b)	GFS forcing data for northward momentum flux	hat10, hep20, hwp30, hcp70	✔
forcing.vapmix.(a,b)	GFS forcing data for 2m vapor mixing ratio	hat10, hep20, hwp30, hcp70	✔
forcing.wndspd.(a,b)	GFS forcing data for 10m wind speed	hat10, hep20, hwp30, hcp70	✔
restart_in.(a,b)	Restart file for ocean state variables	hat10, hep20, hwp30, hcp70	✔

CICE6

Static Datasets (i.e., fix files)

No fix files are required for CICE6.

Grid Description and Initial Condition Files

The input files containing grid information and the initial conditions for global configurations are listed and described in :numref:`Table %s <CICE6_GridICFiles>`.

Input files containing grid information and initial conditions for global configurations

Filename	Description	Valid RES options	Date-dependent
cice_model_RES.res_YYYYMMDDHH.nc	cice model IC or restart file	1.00, 0.50, 0.25	✔
cice.mxRES.YYYYMMDDHH.warmstart.nc	warm restart file used to continue a previous CICE run from an existing model state	1.00, 0.50	✔
grid_cice_NEMS_mxRES.nc	cice model grid at resolution RES	9.00, 5.00, 1.00, 0.50, 0.25
kmtu_cice_NEMS_mxRES.nc	cice model land mask at resolution RES	9.00, 5.00, 1.00, 0.50, 0.25
mesh.mxRES.nc	CICE mesh at resolution RES	9.00, 5.00, 1.00, 0.50, 0.25

WW3

Static Datasets (i.e., fix files)

No fix files are required for WW3.

Grid Description and Initial Condition Files

The files for global configurations are listed and described in :numref:`Table %s <WW3_FixFiles>` for GFSv16 setup and :numref:`Table %s <WW3_FixFilesp>` for single grid configurations. The model definitions for wave grid(s) including spectral and directional resolutions, time steps, numerical scheme and parallelization algorithm, the physics parameters, boundary conditions and grid definitions are stored in binary mod_def files. The aforementioned parameters are defined in ww3_grid.inp.<grd> and the ww3_grid executables generates the binary mod_def.<grd> files.

The WW3 version number in mod_def.<grd> files must be consistent with version of the code in ufs-weather-model. createmoddefs/creategridfiles.sh can be used in order to generate the mod_def.<grd> files, using ww3_grid.inp.<grd>, using the WW3 version in ufs-weather-model. In order to do it, the path to the location of the ufs-weather-model (UFSMODELDIR), the path to generated mod_def.<grd> outputs (OUTDIR), the path to input ww3_grid.inp.<grd> files (SRCDIR) and the path to the working directory for log files (WORKDIR) should be defined.

Input files containing grid information and conservative remapping for global configurations (GFSv16 Wave)

Filename	Description	Spatial Resolution	nFreq	nDir
mod_def.aoc_9km	Antarctic Ocean PolarStereo [50N 90N]	9km	50	36
mod_def.gnh_10m	Global mid core [15S 52N]	10 min	50	36
mod_def.gsh_15m	southern ocean [79.5S 10.5S]	15 min	50	36
mod_def.glo_15mxt	Global 1/4 extended grid [90S 90S]	15 min	36	24
mod_def.points	GFSv16-wave spectral grid point output	na	na	na
rmp_src_to_dst_conserv_002_001.nc	Conservative remapping gsh_15m to gnh_10m	na	na	na
rmp_src_to_dst_conserv_003_001.nc	Conservative remapping aoc_9km to gnh_10m	na	na	na

Input grid information for single global/regional configurations

Filename	Description	Spatial Resolution	nFreq	nDir
mod_def.ant_9km	Regional polar stereo antarctic grid [90S 50S]	9km	36	24
mod_def.glo_10m	Global grid [80S 80N]	10 min	36	24
mod_def.glo_30m	Global grid [80S 80N]	30 min	36	36
mod_def.glo_1deg	Global grid [85S 85N]	1 degree	25	24
mod_def.glo_2deg	Global grid [85S 85N]	2 degree	20	18
mod_def.glo_5deg	Global grid [85S 85N]	5 degree	18	12
mod_def.glo_gwes_30m	Global NAWES 30 min wave grid [80S 80N]	30 min	36	36
mod_def.natl_6m	Regional North Atlantic Basin [1.5N 45.5N; 98W 8W]	6 min	50	36

Coupled regional configurations require forcing files to fill regions that cannot be interpolated from the atmospheric component. For a list of forcing files used to fill unmapped data points see :numref:`Table %s <WW3_ForcingFiles>`.

Forcing information for single regional configurations

Filename	Description	Resolution
wind.natl_6m	Interpolated wind data from GFS	6 min

The model driver input (ww3_shel.nml.IN) includes the input, model and output grids definition, the starting and ending times for the entire model run and output types and intervals. The ww3_multi.inp.IN template is located under tests/parm/ directory. The inputs are described hereinafter:

Model driver input

NMGRIDS	Number of wave model grids
NFGRIDS	Number of grids defining input fields
FUNIPNT	Flag for using unified point output file.
IOSRV	Output server type
FPNTPROC	Flag for dedicated process for unified point output
FGRDPROC	Flag for grids sharing dedicated output processes

If there are input data grids defined ( NFGRIDS > 0 ) then these grids are defined first (CPLILINE, WINDLINE, ICELINE, CURRLINE). These grids are defined as if they are wave model grids using the file mod_def.<grd>. Each grid is defined on a separate input line with <grd>, with nine input flags identifying $ the presence of 1) water levels 2) currents 3) winds 4) ice $ 5) momentum 6) air density and 7-9) assimilation data.

The UNIPOINTS defines the name of this grid for all point output, which gathers the output spectral grid in a unified point output file.

The WW3GRIDLINE defines actual wave model grids using 13 parameters to be read from a single line in the file for each. It includes (1) its own input grid mod_def.<grd>, (2-10) forcing grid ids, (3) rank number, (12) group number and (13-14) fraction of communicator (processes) used for this grid.

RUN_BEG and RUN_END define the starting and end times, FLAGMASKCOMP and FLAGMASKOUT are flags for masking at printout time (default F F), followed by the gridded and point outputs start time (OUT_BEG), interval (DTFLD and DTPNT) and end time (OUT_END). The restart outputs start time, interval and end time are define by RST_BEG, DTRST, RST_END respectively.

The OUTPARS_WAV defines gridded output fields. The GOFILETYPE, POFILETYPE and RSTTYPE are gridded, point and restart output types respectively.

No initial condition files are required for WW3.

Mesh Generation

For coupled applications using the CMEPS mediator, an ESMF Mesh file describing the WW3 domain is required. For regional and sub-global domains, the mesh can be created using a two-step procedure.

Generate a SCRIP format file for the domain

Generate the ESMF Mesh.

In each case, the SCRIP file needs to be checked that it contains the right start and end latitudes and longitudes to match the mod_def file being used.

For the HAFS regional domain, the following commands can be used:

ncremap -g hafswav.SCRIP.nc -G latlon=441,901#snwe=1.45,45.55,-98.05,-7.95#lat_typ=uni#lat_drc=s2n
ESMF_Scrip2Unstruct hafswav.SCRIP.nc mesh.hafs.nc 0

For the sub-global 1-deg domain extending from latitude 85.0S:

ncremap -g glo_1deg.SCRIP.nc -G latlon=171,360#snwe=-85.5,85.5,-0.5,359.5#lat_typ=uni#lat_drc=s2n
ESMF_Scrip2Unstruct glo_1deg.SCRIP.nc mesh.glo_1deg.nc 0

For the sub-global 1/2-deg domain extending from latitude 80.0S:

ncremap -g gwes_30m.SCRIP.nc -G latlon=321,720#snwe=-80.25,80.25,-0.25,359.75#lat_typ=uni#lat_drc=s2n
ESMF_Scrip2Unstruct gwes_30m.SCRIP.nc mesh.gwes_30m.nc 0

For the tripole grid, the mesh file is generated as part of the cpld_gridgen utility in UFS_UTILS.

CDEPS

Static Datasets (i.e., fix files)

No fix files are required for CDEPS.

Grid Description and Initial Condition Files

The input files containing grid information and the time-varying forcing files for global configurations are listed and described in :numref:`Table %s <CDEPS_FilesATM>` and :numref:`Table %s <CDEPS_FilesOCN>`.

Data Atmosphere

Input files containing grid information and forcing files for global configurations

Filename	Description	Date-dependent
cfsr_mesh.nc	ESMF mesh file for CFSR data source
gefs_mesh.nc	ESMF mesh file for GEFS data source
TL639_200618_ESMFmesh.nc	ESMF mesh file for ERA5 data source
cfsr.YYYYMMM.nc	CFSR forcing file for year YYYY and month MM	✔
gefs.YYYYMMM.nc	GEFS forcing file for year YYYY and month MM	✔
ERA5.TL639.YYYY.MM.nc	ERA5 forcing file for year YYYY and month MM	✔

Note

Users can find atmospheric forcing files for use with the Noah-MP land component (LND) in the Land Data Assimilation (DA) data bucket. These files provide atmospheric forcing data related to precipitation, solar radiation, longwave radiation, temperature, pressure, winds, humidity, topography, and mesh data. Forcing files for the land component configuration come from the Global Soil Wetness Project Phase 3 (GSWP3) dataset.

clmforc.GSWP3.c2011.0.5x0.5.Prec.1999-12.nc
clmforc.GSWP3.c2011.0.5x0.5.Prec.2000-01.nc
clmforc.GSWP3.c2011.0.5x0.5.Solr.1999-12.nc
clmforc.GSWP3.c2011.0.5x0.5.Solr.2000-01.nc
clmforc.GSWP3.c2011.0.5x0.5.TPQWL.1999-12.nc
clmforc.GSWP3.c2011.0.5x0.5.TPQWL.2000-01.nc
clmforc.GSWP3.c2011.0.5x0.5.TPQWL.SCRIP.210520_ESMFmesh.nc
fv1.9x2.5_141008_ESMFmesh.nc
topodata_0.9x1.25_USGS_070110_stream_c151201.nc
topodata_0.9x1.SCRIP.210520_ESMFmesh.nc

See the :ref:`Land DA User's Guide <landda:InputFiles>` or the :ref:`WM LND Input <lnd-in>` section of this page for more information on files used in land configurations of the UFS WM.

Data Ocean

Input files containing grid information and forcing files for global configurations

Filename	Description	Date-dependent
TX025_210327_ESMFmesh_py.nc	ESMF mesh file for OISST data source
sst.day.mean.YYYY.nc	OISST forcing file for year YYYY	✔

Input files containing grid information and forcing files for regional configurations

Filename	Description	Date-dependent
hat10_210129_ESMFmesh_py.nc	ESMF mesh file for MOM6 data source
GHRSST_mesh.nc	ESMF mesh file for GHRSST data source
hycom_YYYYMM_surf_nolev.nc	MOM6 forcing file for year YYYY and month MM	✔
ghrsst_YYYYMMDD.nc	GHRSST forcing file for year YYYY, month MM and day DD	✔

GOCART

Static Datasets (i.e., fix files)

The static input files for GOCART configurations are listed and described in :numref:`Table %s <GOCART_ControlFiles>`.

GOCART run control files

Filename	Description
AERO.rc	Atmospheric Model Configuration Parameters
AERO_ExtData.rc	Model Inputs related to aerosol emissions
AERO_HISTORY.rc	Create History List for Output
AGCM.rc	Atmospheric Model Configuration Parameters
CA2G_instance_CA.bc.rc	Resource file for Black Carbon parameters
CA2G_instance_CA.br.rc	Resource file for Brown Carbon parameters
CA2G_instance_CA.oc.rc	Resource file for Organic Carbon parameters
CAP.rc	Meteorological fields imported from atmospheric model (CAP_imports) & Prognostic Tracers Table (CAP_exports)
DU2G_instance_DU.rc	Resource file for Dust parameters
GOCART2G_GridComp.rc	The basic properties of the GOCART2G Grid Components
NI2G_instance_NI.rc	Resource file for Nitrate parameters
SS2G_instance_SS.rc	Resource file for Sea Salt parameters
SU2G_instance_SU.rc	Resource file for Sulfur parameters

GOCART inputs defined in AERO_ExtData are listed and described in :numref:`Table %s <GOCART_InputFiles>`.

GOCART inputs defined in AERO_ExtData.rc

Filename	Description
ExtData/dust	FENGSHA input files
ExtData/QFED	QFED biomass burning emissions
ExtData/CEDS	Anthropogenic emissions
ExtData/MERRA2	DMS concentration
ExtData/PIESA/sfc	Aviation emissions
ExtData/PIESA/L127	H2O2, OH and NO3 mixing ratios
ExtData/MEGAN_OFFLINE_BVOC	VOCs MEGAN biogenic emissions
ExtData/monochromatic	Aerosol monochromatic optics files
ExtData/optics	Aerosol radiation bands optic files for RRTMG
ExtData/volcanic	SO2 volcanic pointwise sources

The static input files when using climatology (MERRA2) are listed and described in :numref:`Table %s <Climatology_InputFiles>`.

Inputs when using climatology (MERRA2)

Filename	Description
merra2.aerclim.2003-2014.m$(month).nc	MERRA2 aerosol climatology mixing ratio
Optics_BC.dat	BC optical look-up table for MERRA2
Optics_DU.dat	DUST optical look-up table for MERRA2
Optics_OC.dat	OC optical look-up table for MERRA2
Optics_SS.dat	Sea Salt optical look-up table for MERRA2
Optics_SU.dat	Sulfate optical look-up table for MERRA2

Grid Description and Initial Condition Files

Running GOCART in UFS does not require aerosol initial conditions, as aerosol models can always start from scratch (cold start). However, this approach does require more than two weeks of model spin-up to obtain reasonable aerosol simulation results. Therefore, the most popular method is to take previous aerosol simulation results. The result is not necessarily from the same model; it could be from a climatology result, such as MERRA2, or from a different model but with the same aerosol species and bin/size distribution.

The aerosol initial input currently read by GOCART is the same format as the UFSAtm initial input data format of gfs_data_tile[1-6].nc in :numref:`Table %s <GridICFiles>`, so the aerosol initial conditions should be combined with the meteorological initial conditions as one initial input file. There are many tools available for this purpose. The UFS_UTILS preprocessing utilities provide a solution for this within the Global Workflow.

UFS AQM

Static Datasets (i.e., fix files)

The static input files for AQM configurations are listed and described in :numref:`Table %s <AQM_ControlFiles>`.

AQM run control files

Filename	Description
AQM.rc	NOAA Air Quality Model Parameters

AQM inputs defined in aqm.rc are listed and described in :numref:`Table %s <AQM_InputFiles>`.

AQM inputs defined in aqm.rc

Filename	Description
AE_cb6r5_ae7_aq.nml	AE Matrix NML - Specifies chemical species, emissions mapping, and related settings for CMAQ's CB6r5 (Revision 5 of the Carbon Bond 6 Mechanism) chemical mechanism.
GC_cb6r5_ae7_aq.nml	GC Matrix NML - Configures CMAQ's gas-phase chemistry controls.
NR_cb6r5_ae7_aq.nml	NR Matrix NML - Non-reactive, gas-phase chemical species configuration for CMAQ.
Species_Table_TR_0.nml	TR Matrix NML - CMAQ species transport definitions. Empty in the UFS as CMAQ is used as a column model with tracer transport using FV3.
CSQY_DATA_cb6r5_ae7_aq	CSQY Data - CMAQ's chemical stoichiometric yield data table used by the solver for numerical calculations.
PHOT_OPTICS.dat	Optics Data
omi_cmaq_2015_361X179.dat	OMI data - Ozone Monitoring Instrument (OMI) profile mappings used in establishing CMAQ boundary conditions.
INPUT/NEXUS_Expt.nc	Emissions File
BEIS_RRFScmaq_C775.ncf	Biogenic File
gspro_biogenics_1mar2017.txt	Biogenic Speciation File
Hourly_Emissions_regrid_rrfs_13km_20190801_t12z_h72.nc	File Emissions File

The most recent AQM input data files can be found in the Weather Model S3 bucket in the input-data-202XXXXX/AQM directory for the most recent date. Below are the data subdirectories that exist in input-data-202XXXXX/AQM.

fix

Fix files are static, climatological, and topographical datasets required for model initialization and running. These files include terrain, land use, vegetation, and soil data.

NEXUS

"NEXUS" (NOAA Emission and eXchange Unified System) files are specialized input files used for air quality modeling to incorporate pollutant emissions data.

INPUT

This directory contains pre-processing, initial conditions, grid-dependent, and namelist files.

NOAH-MP (LND)

LND component datasets are available from the Land Data Assimilation (DA) System data bucket and can be retrieved using a wget command:

wget https://noaa-ufs-land-da-pds.s3.amazonaws.com/develop-20240501/Landda_develop_data.tar.gz
tar xvfz Landda_develop_data.tar.gz

These files will be untarred into an inputs directory. They include data for Jan. 1-2, 2000. :numref:`Table %s <LndInputFiles>` describes the file types. In each file name, YYYY refers to a valid 4-digit year, MM refers to a valid 2-digit month, and DD refers to a valid 2-digit day of the month.

LND input files

Filename(s)	Description	File Type
ufs-land_C96_init_fields.tile*.nc	Initial conditions files for each tile; the files include the initial state variables that are required for the UFS land snow DA to begin a cycling run. `*` stands for the grid tile number [1-6].	Initial conditions
C96.maximum_snow_albedo.tile.nc C96.slope_type.tile.nc C96.soil_type.tile.nc C96.soil_color.tile.nc C96.substrate_temperature.tile.nc C96.vegetation_greenness.tile.nc C96.vegetation_type.tile.nc oro_C96.mx100.tile.nc	Tiled static files that contain information on maximum snow albedo, slope type, soil color and type, substrate temperature, vegetation greenness and type, and orography (grid and land mask information). `*` stands for the grid tile number [1-6].	FV3 fix files/Grid information
grid_spec.nc (aka C96.mosaic.nc)	Contains information on the mosaic grid	FV3 fix files/Grid information
C96_grid.tile*.nc	C96 grid information for tiles 1-6 at C96 grid resolution, where `*` is the grid tile number [1-6].	FV3 fix files/Grid information
C96_oro_data.tile*.nc / oro_C96.mx100.tileN.nc	Orography files that contain grid and land mask information, where `*` is the grid tile number [1-6]. `mx100` refers to the ocean resolution (100=1º).	FV3 fix files/Grid information
See :ref:`CDEPS <cdeps-in>` for information on GSWP3 atmospheric forcing files.	Atmospheric forcing	CDEPS/DATM
ghcn_snwd_ioda_YYYYMMDD.nc	GHCN snow depth data assimilation files	DA
ufs_land_restart.YYYY-MM-DD_HH-mm-SS.nc	Restart file	Restart

Static Datasets (i.e., fix files)

The fix files (listed in :numref:`Table %s <LndInputFiles>`) include specific information on location, time, soil layers, and fixed (invariant) experiment parameters that are required for the land component to run. The data must be provided in :term:`netCDF` format.

The following fix files are available in the inputs/UFS_WM/FV3_fix_tiled/C96/ data directory (downloaded :ref:`above <lnd-in>`):

C96.maximum_snow_albedo.tile*.nc
C96.slope_type.tile*.nc
C96.soil_type.tile*.nc
C96.soil_color.tile*.nc
C96.substrate_temperature.tile*.nc
C96.vegetation_greenness.tile*.nc
C96.vegetation_type.tile*.nc
oro_C96.mx100.tile*.nc

where * refers to the tile number (1-6). Details on the configuration variables included in these files are available in the :ref:`Land DA documentation <landda:InputFiles>`.

Grid Description and Initial Condition Files

The input files containing grid information and the initial conditions for global configurations are listed and described in :numref:`Table %s <LndInputFiles>`.

The initial conditions file includes the initial state variables that are required for the UFS land snow DA to begin a cycling run. The data must be provided in :term:`netCDF` format. The initial conditions file is available in the inputs data directory (downloaded :ref:`above <lnd-in>`) at the following path:

inputs/UFS_WM/NOAHMP_IC/ufs-land_C96_init_fields.tile*.nc

Grid files are available in the inputs/UFS_WM/FV3_input_data/INPUT directory:

C96_grid.tile*.nc
grid_spec.nc     # aka C96.mosaic.nc

The C96_grid.tile*.nc files contain grid information for tiles 1-6 at C96 grid resolution. The grid_spec.nc file contains information on the mosaic grid.

Additional Files

The LND component uses atmospheric forcing files, data assimilation files, and restart files, which are also listed in :numref:`Table %s <LndInputFiles>`.

Model configuration files

The configuration files used by the UFS Weather Model are listed here and described below:

diag_table

field_table

model_configure

ufs.configure

fd_ufs.yaml

suite_[suite_name].xml (used only at build time)

datm.streams (used by CDEPS)

datm_in (used by CDEPS)

blkdat.input (used by HYCOM)

While the input.nml file is also a configuration file used by the UFS Weather Model, it is described in :numref:`Section %s <InputNML>`. The run-time configuration of model output fields is controlled by the combination of diag_table and model_configure, and is described in detail in :numref:`Section %s <OutputFiles>`.

`diag_table` file

There are three sections in file diag_table: Header (Global), File, and Field. These are described below.

Header Description

The Header section must reside in the first two lines of the diag_table file and contain the title and date of the experiment (see example below). The title must be a Fortran character string. The base date is the reference time used for the time units, and must be greater than or equal to the model start time. The base date consists of six space-separated integers in the following format: year month day hour minute second. Here is an example:

20161003.00Z.C96.64bit.non-mono
2016 10 03 00 0 0

File Description

The File Description lines are used to specify the name of the file(s) to which the output will be written. They contain one or more sets of six required and five optional fields (optional fields are denoted by square brackets [ ]). The lines containing File Descriptions can be intermixed with the lines containing Field Descriptions as long as files are defined before fields that are to be written to them. File entries have the following format:

"file_name", output_freq, "output_freq_units", file_format, "time_axis_units", "time_axis_name"
[, new_file_freq, "new_file_freq_units"[, "start_time"[, file_duration, "file_duration_units"]]]

These file line entries are described in :numref:`Table %s <FileDescription>`.

Description of the six required and five optional fields used to define output file sampling rates.

File Entry	Variable Type	Description
file_name	CHARACTER(len=128)	Output file name without the trailing ".nc"
output_freq	INTEGER	The period between records in the file_name: > 0 output frequency in output_freq_units. = 0 output frequency every time step (output_freq_units is ignored) =-1 output at end of run only (output_freq_units is ignored)
output_freq_units	CHARACTER(len=10)	The units in which output_freq is given. Valid values are "years", "months", "days", "minutes", "hours", or "seconds".
file_format	INTEGER	Currently only the netCDF file format is supported. = 1 netCDF
time_axis_units	CHARACTER(len=10)	The units to use for the time-axis in the file. Valid values are "years", "months", "days", "minutes", "hours", or "seconds".
time_axis_name	CHARACTER(len=128)	Axis name for the output file time axis. The character string must contain the string 'time'. (mixed upper and lowercase allowed.)
new_file_freq	INTEGER, OPTIONAL	Frequency for closing the existing file, and creating a new file in new_file_freq_units.
new_file_freq_units	CHARACTER(len=10), OPTIONAL	Time units for creating a new file: either years, months, days, minutes, hours, or seconds. NOTE: If the new_file_freq field is present, then this field must also be present.
start_time	CHARACTER(len=25), OPTIONAL	Time to start the file for the first time. The format of this string is the same as the global date. NOTE: The new_file_freq and the new_file_freq_units fields must be present to use this field.
file_duration	INTEGER, OPTIONAL	How long file should receive data after start time in file_duration_units. This optional field can only be used if the start_time field is present. If this field is absent, then the file duration will be equal to the frequency for creating new files. NOTE: The file_duration_units field must also be present if this field is present.
file_duration_units	CHARACTER(len=10), OPTIONAL	File duration units. Can be either years, months, days, minutes, hours, or seconds. NOTE: If the file_duration field is present, then this field must also be present.

Field Description

The field section of the diag_table specifies the fields to be output at run time. Only fields registered with register_diag_field(), which is an API in the FMS diag_manager routine, can be used in the diag_table.

Registration of diagnostic fields is done using the following syntax

diag_id = register_diag_field(module_name, diag_name, axes, ...)

in file ufsatm/FV3/atmos_cubed_sphere/tools/fv_diagnostics.F90. As an example, the sea level pressure is registered as:

id_slp = register_diag_field (trim(field), 'slp', axes(1:2), &   Time, 'sea-level pressure', 'mb', missing_value=missing_value, range=slprange )

All data written out by diag_manager is controlled via the diag_table. A line in the field section of the diag_table file contains eight variables with the following format:

"module_name", "field_name", "output_name", "file_name", "time_sampling", "reduction_method", "regional_section", packing

These field section entries are described in :numref:`Table %s <FieldDescription>`.

Description of the eight variables used to define the fields written to the output files.

Field Entry	Variable Type	Description
module_name	CHARACTER(len=128)	Module that contains the field_name variable. (e.g. dynamic, gfs_phys, gfs_sfc)
field_name	CHARACTER(len=128)	The name of the variable as registered in the model.
output_name	CHARACTER(len=128)	Name of the field as written in file_name.
file_name	CHARACTER(len=128)	Name of the file where the field is to be written.
time_sampling	CHARACTER(len=50)	Currently not used. Please use the string "all".
reduction_method	CHARACTER(len=50)	The data reduction method to perform prior to writing data to disk. Current supported option is .false.. See `FMS/diag_manager/diag_table.F90` for more information.
regional_section	CHARACTER(len=50)	Bounds of the regional section to capture. Current supported option is "none". See `FMS/diag_manager/diag_table.F90` for more information.
packing	INTEGER	Fortran number KIND of the data written. Valid values: 1=double precision, 2=float, 4=packed 16-bit integers, 8=packed 1-byte (not tested).

Comments can be added to the diag_table using the hash symbol (#).

Each WM component has its own diag_table with associated variables. :numref:`Table %s <diag-table-options>` contains links to the full set of options for each WM component.

* diag_table Options for WM Components*

WM Component	Diag Table	Source File
UFSatm	:ref:`FV3 Variables <fv3diagtable>`	GFS_diagnostics.F90
MOM6	MOM6 Variables	MOM_diagnostics.F90

A brief example of the diag_table is shown below. "..." denotes where lines have been removed.

 20161003.00Z.C96.64bit.non-mono
 2016 10 03 00 0 0

 "grid_spec",     -1,  "months",   1, "days",  "time"
 "atmos_4xdaily",  6,  "hours",    1, "days",  "time"
 "atmos_static"   -1,  "hours",    1, "hours", "time"
 "fv3_history",    0,  "hours",    1, "hours", "time"
 "fv3_history2d",  0,  "hours",    1, "hours", "time"

 #
 #=======================
 # ATMOSPHERE DIAGNOSTICS
 #=======================
 ###
 # grid_spec
 ###
  "dynamics", "grid_lon",  "grid_lon",  "grid_spec", "all", .false.,  "none", 2,
  "dynamics", "grid_lat",  "grid_lat",  "grid_spec", "all", .false.,  "none", 2,
  "dynamics", "grid_lont", "grid_lont", "grid_spec", "all", .false.,  "none", 2,
  "dynamics", "grid_latt", "grid_latt", "grid_spec", "all", .false.,  "none", 2,
  "dynamics", "area",      "area",      "grid_spec", "all", .false.,  "none", 2,
 ###
 # 4x daily output
 ###
  "dynamics",  "slp",       "slp",      "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "vort850",   "vort850",  "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "vort200",   "vort200",  "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "us",        "us",       "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "u1000",     "u1000",    "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "u850",      "u850",     "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "u700",      "u700",     "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "u500",      "u500",     "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "u200",      "u200",     "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "u100",      "u100",     "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "u50",       "u50",      "atmos_4xdaily", "all", .false.,  "none", 2
  "dynamics",  "u10",       "u10",      "atmos_4xdaily", "all", .false.,  "none", 2

 ...
 ###
 # gfs static data
 ###
  "dynamics",  "pk",        "pk",       "atmos_static",  "all", .false.,  "none", 2
  "dynamics",  "bk",        "bk",       "atmos_static",  "all", .false.,  "none", 2
  "dynamics",  "hyam",     "hyam",      "atmos_static",  "all", .false.,  "none", 2
  "dynamics",  "hybm",     "hybm",       "atmos_static",  "all", .false.,  "none", 2
  "dynamics",  "zsurf",    "zsurf",      "atmos_static",  "all", .false.,  "none", 2
 ###
 # FV3 variables needed for NGGPS evaluation
 ###
 "gfs_dyn",    "ucomp",      "ugrd",     "fv3_history",    "all",  .false.,  "none",  2
 "gfs_dyn",    "vcomp",      "vgrd",     "fv3_history",    "all",  .false.,  "none",  2
 "gfs_dyn",    "sphum",      "spfh",     "fv3_history",    "all",  .false.,  "none",  2
 "gfs_dyn",    "temp",       "tmp",      "fv3_history",    "all",  .false.,  "none",  2
 ...
 "gfs_phys",  "ALBDO_ave",    "albdo_ave", "fv3_history2d", "all", .false., "none",  2
 "gfs_phys",  "cnvprcp_ave",  "cprat_ave", "fv3_history2d", "all", .false., "none",  2
 "gfs_phys",  "cnvprcpb_ave", "cpratb_ave","fv3_history2d", "all", .false., "none",  2
 "gfs_phys",  "totprcp_ave",  "prate_ave", "fv3_history2d", "all", .false., "none",  2
 ...
 "gfs_sfc",   "crain",   "crain",    "fv3_history2d",  "all",  .false.,  "none",  2
 "gfs_sfc",   "tprcp",   "tprcp",    "fv3_history2d",  "all",  .false.,  "none",  2
 "gfs_sfc",   "hgtsfc",  "orog",     "fv3_history2d",  "all",  .false.,  "none",  2
 "gfs_sfc",   "weasd",   "weasd",    "fv3_history2d",  "all",  .false.,  "none",  2
 "gfs_sfc",   "f10m",    "f10m",     "fv3_history2d",  "all",  .false.,  "none",  2
...

More information on the content of this file can be found in FMS/diag_manager/diag_table.F90.

Note

None of the lines in the diag_table can span multiple lines.

`field_table` file

The FMS field and tracer managers are used to manage tracers and specify tracer options. All tracers advected by the model must be registered in an ASCII table called field_table. The field table consists of entries in the following format:

The first line of an entry should consist of three quoted strings:

The first quoted string will tell the field manager what type of field it is. The string "TRACER" is used to declare a field entry.
The second quoted string will tell the field manager which model the field is being applied to. The supported type at present is "atmos_mod" for the atmosphere model.
The third quoted string should be a unique tracer name that the model will recognize.

The second and following lines are called methods. These lines can consist of two or three quoted strings. The first string will be an identifier that the querying module will ask for. The second string will be a name that the querying module can use to set up values for the module. The third string, if present, can supply parameters to the calling module that can be parsed and used to further modify values.

An entry is ended with a forward slash (/) as the final character in a row. Comments can be inserted in the field table by adding a hash symbol (#) as the first character in the line.

Below is an example of a field table entry for the tracer called "sphum":

# added by FRE: sphum must be present in atmos
# specific humidity for moist runs
 "TRACER", "atmos_mod", "sphum"
           "longname",     "specific humidity"
           "units",        "kg/kg"
           "profile_type", "fixed", "surface_value=3.e-6" /

In this case, methods applied to this :term:`tracer` include setting the long name to "specific humidity", the units to "kg/kg". Finally a field named "profile_type" will be given a child field called "fixed", and that field will be given a field called "surface_value" with a real value of 3.E-6. The "profile_type" options are listed in :numref:`Table %s <TracerTable>`. If the profile type is "fixed" then the tracer field values are set equal to the surface value. If the profile type is "profile" then the top/bottom of model and surface values are read and an exponential profile is calculated, with the profile being dependent on the number of levels in the component model.

Tracer Profile Setup from FMS/tracer_manager/tracer_manager.F90.

Method Type	Method Name	Method Control
profile_type	fixed	surface_value = X
profile_type	profile	surface_value = X, top_value = Y (atmosphere)

For the case of

"profile_type","profile","surface_value = 1e-12, top_value = 1e-15"

in a 15 layer model this would return values of surf_value = 1e-12 and multiplier = 0.6309573, i.e 1e-15 = 1e-12*(0.6309573^15).

A method is a way to allow a component module to alter the parameters it needs for various tracers. In essence, this is a way to modify a default value. A namelist can supply default parameters for all tracers and a method, as supplied through the field table, will allow the user to modify the default parameters on an individual tracer basis. The lines in this file can be coded quite flexibly. Due to this flexibility, a number of restrictions are required. See FMS/field_manager/field_manager.F90 for more information.

`model_configure` file

This file contains settings and configurations for the NUOPC/ESMF main component, including the simulation start time, the processor layout/configuration, and the I/O selections. :numref:`Table %s <ModelConfigParams>` shows the following parameters that can be set in model_configure at run-time.

Parameters that can be set in model_configure at run-time.

Parameter	Meaning	Type	Default Value
print_esmf	flag for ESMF PET files	logical	.true.
start_year	start year of model integration	integer	2019
start_month	start month of model integration	integer	09
start_day	start day of model integration	integer	12
start_hour	start hour of model integration	integer	00
start_minute	start minute of model integration	integer	0
start_second	start second of model integration	integer	0
nhours_fcst	total forecast length	integer	48
dt_atmos	atmosphere time step in second	integer	1800 (for C96)
restart_interval	frequency to output restart file or forecast hours to write out restart file	integer	0 (0: write restart file at the end of integration; 12, -1: write out restart every 12 hours; 12 24 write out restart files at fh=12 and 24)
quilting	flag to turn on quilt	logical	.true.
write_groups	total number of groups	integer	2
write_tasks_per_group	total number of write tasks in each write group	integer	6
output_history	flag to output history files	logical	.true.
num_files	number of output files	integer	2
filename_base	file name base for the output files	character(255)	'atm' 'sfc'
output_grid	output grid	character(255)	gaussian_grid
output_file	output file format	character(255)	netcdf
imo	i-dimension for output grid	integer	384
jmo	j-dimension for output grid	integer	190
output_fh	history file output forecast hours or history file output frequency if the second elelment is -1	real	-1 (negative: turn off the option, otherwise overwritten nfhout/nfhout_fh; 6 -1: output every 6 hoursr; 6 9: output history files at fh=6 and 9. Note: output_fh can only take 1032 characters)

:numref:`Table %s <ModelConfigParamsNotChanged>` shows the following parameters in model_configure that are not usually changed.

Parameters that are not usually changed in model_configure at run-time.

Parameter	Meaning	Type	Default Value
calendar	type of calendar year	character(*)	'gregorian'
fhrot	forecast hour at restart for nems/earth grid component clock in coupled model	integer	0
write_dopost	flag to do post on write grid component	logical	.true.
write_nsflip	flag to flip the latitudes from S to N to N to S on output domain	logical	.false.
ideflate	lossless compression level	integer	1 (0:no compression, range 1-9)
nbits	lossy compression level	integer	14 (0: lossless, range 1-32)
iau_offset	IAU offset lengdth	integer	0

`ufs.configure` file

This file contains information about the various NEMS components and their run sequence. The active components for a particular model configuration are given in the EARTH_component_list. For each active component, the model name and compute tasks assigned to the component are given. A specific component might also require additional configuration information to be present. The runSeq describes the order and time intervals over which one or more component models integrate in time. Additional attributes, if present, provide additional configuration of the model components when coupled with the CMEPS mediator.

For the ATM application, since it consists of a single component, the ufs.configure is simple and does not need to be changed. A sample of the file contents is shown below:

# ESMF #
logKindFlag:            ESMF_LOGKIND_MULTI
globalResourceControl:  true

# EARTH #
EARTH_component_list: ATM
EARTH_attributes::
Verbosity = 0
::

# ATM #
ATM_model:                      @[atm_model]
ATM_petlist_bounds:             @[atm_petlist_bounds]
ATM_omp_num_threads:            @[atm_omp_num_threads]
ATM_attributes::
Verbosity = 0
Diagnostic = 0
::

# Run Sequence #
runSeq::
ATM
::

However, ufs.configure files for other configurations of the Weather Model are more complex. A full set of ufs.configure templates is available in the ufs-weather-model/tests/parm/ directory here. Template names follow the pattern ufs.configure.*.IN. A number of samples are available below:

ATMAQ configuration

S2S (fully coupled S2S configuration that receives atmosphere-ocean fluxes from a mediator)

S2SW (fully coupled S2SW configuration)

S2SWA (coupled GOCART in the S2SAW configuration)

ATM-LND (ATML configuration)

For more HAFS, HAFSW, and HAFS-ALL configurations please see the following ufs.configure templates:

HAFS ATM-OCN

HAFS ATM-WAV

HAFS ATM-OCN-WAV

HAFS ATM-DOCN

Note

The aoflux_grid option is used to select the grid/mesh to perform atmosphere-ocean flux calculation. The possible options are xgrid (exchange grid), agrid (atmosphere model grid) and ogrid (ocean model grid).

Note

The aoflux_code option is used to define the algorithm that will be used to calculate atmosphere-ocean fluxes. The possible options are cesm and ccpp. If ccpp is selected then the suite file provided in the aoflux_ccpp_suite option is used to calculate atmosphere-ocean fluxes through the use of CCPP host model.

`fd_ufs.yaml`

The fd_ufs.yaml file contains a field dictionary to configure several fields that are used in import/export operations by different Earth modeling components in ESMF's NUOPC coupling system. It allows the sharing of coupling fields between components. Entries in the field dictionary are organized as YAML lists of maps. The NUOPC Field Dictionary data structure in the model code is set up by the NUOPC function called NUOPC_FieldDictionarySetup(), which loads the fd_ufs.yaml file (see UFSDriver.F90). The field metadata described in each entry are used by the NUOPC layer to match fields provided and requested by the various component models. The field dictionary can be shared with other Earth modeling systems that use the same ESPS coupling strategy, such as the Community Earth System Model (CESM).

The standard field metadata for each coupling field has the following keys and corresponding values:

- standard_name: <field_name>
  canonical_units: <unit>
  description: <brief description about this field>
  alias: <other_field_name>

standard_name (required): Name of the field.
canonical_units (required): The units used to fully define the field
description (optional): Brief explanation of the field
alias (optional): Alternative names for the field. An alias can be one character string or a list of strings (e.g., <name> or [<name>, <name2>]). This allows a field to have different names used in the coupling field exchange.

Either the standard_name or alias name can be used in a component model, and the NUOPC layer will recognize these fields as the same field using the definitions provided in the YAML file. For more on the NUOPC field dictionary, visit the documentation.

The Suite Definition File (SDF) File

There are two SDFs currently supported for the UFS Medium Range Weather App configuration:

suite_FV3_GFS_v15p2.xml

suite_FV3_GFS_v16beta.xml

There are four SDFs currently supported for the UFS Short Range Weather App configuration:

suite_FV3_GFS_v16.xml

suite_FV3_RRFS_v1beta.xml

suite_FV3_HRRR.xml

suite_FV3_WoFS_v0.xml

Detailed descriptions of the supported suites can be found with the CCPP v6.0.0 Scientific Documentation.

`datm.streams`

A data stream is a time series of input forcing files. A data stream configuration file (datm.streams) describes the information about those input forcing files.

Parameters that can be set in a data stream configuration file at run-time.

Parameter	Meaning
taxmode01	time axis mode
mapalgo01	type of spatial mapping (default=bilinear)
tInterpAlgo01	time interpolation algorithm option
readMode01	number of forcing files to read in (current option is single)
dtimit01	ratio of max/min stream delta times (default=1.0. For monthly data, the ratio is 31/28.)
stream_offset01	shift of the time axis of a data stream in seconds (Positive offset advances the time axis forward.)
yearFirst01	the first year of the stream data
yearLast01	the last year of the stream data
yearAlign01	the simulation year corresponding to yearFirst01
stream_vectors01	the paired vector field names
stream_mesh_file01	stream mesh file name
stream_lev_dimname01	name of vertical dimension in data stream
stream_data_files01	input forcing file names
stream_data_variables01	a paired list with the name of the variable used in the file on the left and the name of the Fortran variable on the right

A sample of the data stream file is shown below:

stream_info:               cfsr.01
taxmode01:                 cycle
mapalgo01:                 bilinear
tInterpAlgo01:             linear
readMode01:                single
dtlimit01:                 1.0
stream_offset01:           0
yearFirst01:               2011
yearLast01:                2011
yearAlign01:               2011
stream_vectors01:          "u:v"
stream_mesh_file01:        DATM_INPUT/cfsr_mesh.nc
stream_lev_dimname01:      null
stream_data_files01:       DATM_INPUT/cfsr.201110.nc
stream_data_variables01:  "slmsksfc Sa_mask" "DSWRF Faxa_swdn" "DLWRF Faxa_lwdn" "vbdsf_ave Faxa_swvdr" "vddsf_ave Faxa_swvdf" "nbdsf_ave Faxa_swndr" "nddsf_ave Faxa_swndf" "u10m Sa_u10m" "v10m Sa_v10m" "hgt_hyblev1 Sa_z" "psurf Sa_pslv" "tmp_hyblev1 Sa_tbot" "spfh_hyblev1 Sa_shum" "ugrd_hyblev1 Sa_u" "vgrd_hyblev1 Sa_v" "q2m Sa_q2m" "t2m Sa_t2m" "pres_hyblev1 Sa_pbot" "precp Faxa_rain" "fprecp Faxa_snow"

`datm_in`

Parameters that can be set in a data stream namelist file (datm_in) at run-time.

Parameter	Meaning
datamode	data mode (such as CFSR, GEFS, etc.)
factorfn_data	file containing correction factor for input data
factorfn_mesh	file containing correction factor for input mesh
flds_co2	if true, prescribed co2 data is sent to the mediator
flds_presaero	if true, prescribed aerosol data is sent to the mediator
flds_wiso	if true, water isotopes data is sent to the mediator
iradsw	the frequency to update the shortwave radiation in number of steps (or hours if negative)
model_maskfile	data stream mask file name
model_meshfile	data stream mesh file name
nx_global	number of grid points in zonal direction
ny_global	number of grid points in meridional direction
restfilm	model restart file namelist

A sample of the data stream namelist file is shown below:

&datm_nml
datamode = "CFSR"
factorfn_data = "null"
factorfn_mesh = "null"
flds_co2 = .false.
flds_presaero = .false.
flds_wiso = .false.
iradsw = 1
model_maskfile = "DATM_INPUT/cfsr_mesh.nc"
model_meshfile = "DATM_INPUT/cfsr_mesh.nc"
nx_global = 1760
ny_global = 880
restfilm = "null"
/

`blkdat.input`

The HYCOM model reads parameters from a custom formatted configuraiton file, blkdat.input. The HYCOM User's Guide provides an in depth description of the configuration settings.

Namelist file `input.nml`

The atmosphere model reads many parameters from a Fortran namelist file, named input.nml. This file contains several Fortran namelist records, some of which are always required, others of which are only used when selected physics options are chosen:

The CCPP Scientific Documentation provides an in-depth description of the namelist settings. Information describing the various physics-related namelist records can be viewed here.

The Stochastic Physics Documentation describes the stochastic physics namelist records.

The FV3 Dynamical Core Technical Documentation describes some of the other namelist records (dynamics, grid, etc).

The namelist section &interpolator_nml is not used in this release, and any modifications to it will have no effect on the model results.

fms_io_nml

The namelist section &fms_io_nml of input.nml contains variables that control reading and writing of restart data in netCDF format. There is a global switch to turn on/off the netCDF restart options in all of the modules that read or write these files. The two namelist variables that control the netCDF restart options are fms_netcdf_override and fms_netcdf_restart. The default values of both flags are .true., so by default, the behavior of the entire model is to use netCDF IO mode. To turn off netCDF restart, simply set fms_netcdf_restart to .false.. The namelist variables used in &fms_io_nml are described in :numref:`Table %s <fms_io_nml>`.

Description of the &fms_io_nml namelist section.

Variable Name	Description	Data Type	Default Value
fms_netcdf_override	If true, `fms_netcdf_restart` overrides the individual `do_netcdf_restart` value. If false, individual module settings has a precedence over the global setting, therefore `fms_netcdf_restart` is ignored.	logical	.true.
fms_netcdf_restart	If true, all modules using restart files will operate under netCDF mode. If false, all modules using restart files will operate under binary mode. This flag is effective only when `fms_netcdf_override` is .true. When `fms_netcdf_override` is .false., individual module setting takes over.	logical	.true.
threading_read	Can be 'single' or 'multi'	character(len=32)	'multi'
format	Format of restart data. Only netCDF format is supported in fms_io.	character(len=32)	'netcdf'
read_all_pe	Reading can be done either by all PEs (default) or by only the root PE.	logical	.true.
iospec_ieee32	If set, call mpp_open single 32-bit ieee file for reading.	character(len=64)	'-N ieee_32'
max_files_w	Maximum number of write files	integer	40
max_files_r	Maximum number of read files	integer	40
time_stamp_restart	If true, `time_stamp` will be added to the restart file name as a prefix.	logical	.true.
print_chksum	If true, print out chksum of fields that are read and written through save_restart/restore_state.	logical	.false.
show_open_namelist_file_warning	Flag to warn that open_namelist_file should not be called when INTERNAL_FILE_NML is defined.	logical	.false.
debug_mask_list	Set `debug_mask_list` to true to print out mask_list reading from mask_table.	logical	.false.
checksum_required	If true, compare checksums stored in the attribute of a field against the checksum after reading in the data.	logical	.true.

This release of the UFS Weather Model sets the following variables in the &fms_io_nml namelist:

&fms_io_nml
  checksum_required = .false.
  max_files_r = 100
  max_files_w = 100
/

`namsfc`

The namelist section &namsfc contains the filenames of the static datasets (i.e., fix files). :numref:`Table %s <FixFiles>` contains a brief description of the climatological information in these files. The variables used in &namsfc to set the filenames are described in :numref:`Table %s <namsfc_nml>`.

List of common variables in the *namsfc namelist section used to set the filenames of static datasets.*

Variable Name	File contains	Data Type	Default Value
fnglac	Climatological glacier data	character*500	'global_glacier.2x2.grb'
fnmxic	Climatological maximum ice extent	character*500	'global_maxice.2x2.grb'
fntsfc	Climatological surface temperature	character*500	'global_sstclim.2x2.grb'
fnsnoc	Climatological snow depth	character*500	'global_snoclim.1.875.grb'
fnzorc	Climatological surface roughness	character*500	'global_zorclim.1x1.grb'
fnalbc	Climatological snowfree albedo	character*500	'global_albedo4.1x1.grb'
fnalbc2	Four albedo fields for seasonal mean climatology	character*500	'global_albedo4.1x1.grb'
fnaisc	Climatological sea ice	character*500	'global_iceclim.2x2.grb'
fntg3c	Climatological deep soil temperature	character*500	'global_tg3clim.2.6x1.5.grb'
fnvegc	Climatological vegetation cover	character*500	'global_vegfrac.1x1.grb'
fnvetc	Climatological vegetation type	character*500	'global_vegtype.1x1.grb'
fnsotc	Climatological soil type	character*500	'global_soiltype.1x1.grb'
fnsmcc	Climatological soil moisture	character*500	'global_soilmcpc.1x1.grb'
fnmskh	High resolution land mask field	character*500	'global_slmask.t126.grb'
fnvmnc	Climatological minimum vegetation cover	character*500	'global_shdmin.0.144x0.144.grb'
fnvmxc	Climatological maximum vegetation cover	character*500	'global_shdmax.0.144x0.144.grb'
fnslpc	Climatological slope type	character*500	'global_slope.1x1.grb'
fnabsc	Climatological maximum snow albedo	character*500	'global_snoalb.1x1.grb'

A sample subset of this namelist is shown below:

&namsfc
  FNGLAC   = 'global_glacier.2x2.grb'
  FNMXIC   = 'global_maxice.2x2.grb'
  FNTSFC   = 'RTGSST.1982.2012.monthly.clim.grb'
  FNSNOC   = 'global_snoclim.1.875.grb'
  FNZORC   = 'igbp'
  FNALBC   = 'global_snowfree_albedo.bosu.t126.384.190.rg.grb'
  FNALBC2  = 'global_albedo4.1x1.grb'
  FNAISC   = 'CFSR.SEAICE.1982.2012.monthly.clim.grb'
  FNTG3C   = 'global_tg3clim.2.6x1.5.grb'
  FNVEGC   = 'global_vegfrac.0.144.decpercent.grb'
  FNVETC   = 'global_vegtype.igbp.t126.384.190.rg.grb'
  FNSOTC   = 'global_soiltype.statsgo.t126.384.190.rg.grb'
  FNSMCC   = 'global_soilmgldas.t126.384.190.grb'
  FNMSKH   = 'seaice_newland.grb'
  FNVMNC   = 'global_shdmin.0.144x0.144.grb'
  FNVMXC   = 'global_shdmax.0.144x0.144.grb'
  FNSLPC   = 'global_slope.1x1.grb'
  FNABSC   = 'global_mxsnoalb.uariz.t126.384.190.rg.grb'
/

Additional variables for the &namsfc namelist can be found in the ufsatm/ccpp/physics/physics/Interstitials/UFS_SCM_NEPTUNE/sfcsub.F file. .. _atmos_model_nml_section:

`atmos_model_nml`

The namelist section &atmos_model_nml contains information used by the atmosphere model. The variables used in &atmos_model_nml are described in :numref:`Table %s <atmos_model_nml>`.

List of common variables in the *atmos_model_nml namelist section.

Variable Name	Description	Data Type	Default Value
blocksize	Number of columns in each `block` sent to the physics. OpenMP threading is done over the number of blocks. For best performance this number should divide the number of grid cells per processor: `((npx-1)(npy-1)/(layout\_x)(layout\_y))`. A description of these variables is provided here.	integer	1
chksum_debug	If true, compute checksums for all variables passed into the GFS physics, before and after each physics timestep. This is very useful for reproducibility checking.	logical	.false.
dycore_only	If true, only the dynamical core (and not the GFS physics) is executed when running the model, essentially running the model as a solo dynamical core.	logical	.false.
debug	If true, turn on additional diagnostics for the atmospheric model.	logical	.false.
sync	If true, initialize timing identifiers.	logical	.false.
ccpp_suite	Name of the CCPP physics suite	character(len=256)	FV3_GFS_v15p2, set in `build.sh`
avg_max_length	Forecast interval (in seconds) determining when the maximum values of diagnostic fields in FV3 dynamics are computed.	real

A sample of this namelist is shown below:

&atmos_model_nml
  blocksize = 32
  chksum_debug = .false.
  dycore_only = .false.
  ccpp_suite = 'FV3_GFS_v16beta'
/

The namelist section relating to the FMS diagnostic manager &diag_manager_nml is described in :numref:`Section %s <DiagManagerNML>`.

gfs_physics_nml

The namelist section &gfs_physics_nml contains physics-related information used by the atmosphere model and some of the variables are only relevant for specific parameterizations and/or configurations. The small set of variables used in &gfs_physics_nml are described in :numref:`Table %s <gfs_physics_nml>`.

List of common variables in the *gfs_physics_nml namelist section.

Variable Name	Description	Data Type	Default Value
cplflx	Flag to activate atmosphere-ocean coupling. If true, turn on receiving exchange fields from other components such as ocean.	logical	.false.
use_med_flux	Flag to receive atmosphere-ocean fluxes from mediator. If true, atmosphere-ocean fluxes will be received into the CCPP physics and used there, instead of calculating them.	logical	.false.

A sample subset of this namelist is shown below:

&gfs_physics_nml
  use_med_flux = .true.
  cplflx       = .true.
/

Additional variables for the &gfs_physics_nml namelist can be found in the GFS_typedefs.F90

Output files

UFSAtm

The output files generated when running fv3.exe are defined in the diag_table file. For the default global configuration, the following files are output (six files of each kind, corresponding to the six tiles of the model grid):

atmos_4xdaily.tile[1-6].nc

atmos_static.tile[1-6].nc

sfcfHHH.nc

atmfHHH.nc

grid_spec.tile[1-6].nc

Note that the sfcf* and atmf* files are not output on the 6 tiles, but instead as a single global gaussian grid file. The specifications of the output files (format, projection, etc) may be overridden in the model_configure input file, see :numref:`Section %s <model_configureFile>`.

The regional configuration will generate similar output files, but the tile[1-6] is not included in the filename.

Two files (model_configure and diag_table) control the output that is generated by the UFS Weather Model. The output files that contain the model variables are written to a file as shown in the figure below. The format of these output files is selected in model_configure as NetCDF. The information in these files may be remapped, augmented with derived variables, and converted to GRIB2 by the Unified Post Processor (UPP). Model variables are listed in the diag_table in two groupings, fv3_history and fv3_history2d, as described in :numref:`Section %s <diag_tableFile>`. The names of the files that contain these model variables are specified in the model_configure file. When quilting is set to .true. for the write component, the variables listed in the groups fv3_history and fv3_history2d are converted into the two output files named in the model_configure file, e.g. atmfHHH. and sfcfHHH.. The bases of the file names (atm and sfc) are specified in the model_configure file, and HHH refers to the forecast hour.

Relationship between diag_table, model_configure and generated output files

Standard output files are logfHHH (one per forecast hour), and out and err as specified by the job submission. ESMF may also produce log files (controlled by variable print_esmf in the model_configure file), called PETnnn.ESMF_LogFile (one per MPI task).

Additional output files include: nemsusage.xml, a timing log file; time_stamp.out, contains the model init time; RESTART/*nc, files needed for restart runs.

MOM6

MOM6 output is controlled via the FMS diag_manager using the diag_table. When MOM6 is present, the diag_table shown :ref:`above <code-block-fv3-diag-table>` includes additional requested MOM6 fields.

A brief example of the diag_table is shown below. "..." denotes where lines have been removed.

 ######################
 "ocn%4yr%2mo%2dy%2hr",      6,  "hours", 1, "hours", "time", 6, "hours", "1901 1 1 0 0 0"
 "SST%4yr%2mo%2dy",      1,  "days",  1, "days",  "time", 1, "days",  "1901 1 1 0 0 0"
 ##############################################
 # static fields
 "ocean_model", "geolon",      "geolon",      "ocn%4yr%2mo%2dy%2hr", "all", .false., "none", 2
 "ocean_model", "geolat",      "geolat",      "ocn%4yr%2mo%2dy%2hr", "all", .false., "none", 2
 ...
# ocean output TSUV and others
 "ocean_model", "SSH",      "SSH",      "ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2
 "ocean_model", "SST",      "SST",      "ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2
 "ocean_model", "SSS",      "SSS",      "ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2
 ...
# save daily SST
 "ocean_model", "geolon",      "geolon",      "SST%4yr%2mo%2dy", "all", .false., "none", 2
 "ocean_model", "geolat",      "geolat",      "SST%4yr%2mo%2dy", "all", .false., "none", 2
 "ocean_model", "SST",         "sst",         "SST%4yr%2mo%2dy", "all", .true.,  "none", 2

# Z-Space Fields Provided for CMIP6 (CMOR Names):
#===============================================
 "ocean_model_z","uo","uo"      ,"ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2
 "ocean_model_z","vo","vo"      ,"ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2
 "ocean_model_z","so","so"      ,"ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2
 "ocean_model_z","temp","temp"  ,"ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2

# forcing
 "ocean_model", "taux",      "taux",          "ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2
 "ocean_model", "tauy",      "tauy",          "ocn%4yr%2mo%2dy%2hr","all",.true.,"none",2
 ...

HYCOM

HYCOM output configuration is set in the :ref:`blkdat.input<HYCOM_BlkdatInput>` file. A few common configuration options are described in :numref:`Table %s <HYCOM_OutputConfig>`

The following table describes HYCOM output configuration.

Parameter	Description
dsurfq	Number of days between model diagnostics at the surface
diagfq	Number of days between model diagnostics
meanfq	Number of days between model time averaged diagnostics
rstrfq	Number of days between model restart output
itest	i grid point where detailed diagnostics are desired
jtest	j grid point where detailed diagnostics are desired

HYCOM outpus multiple datasets. These datasets contain both dot-a (.a), dot-b (.b), and dot-txt (.txt) files. Dot-a files contain data written as 32-bit IEEE real values (idm*jdm). Dot-b files contain plain text metadata for each field in the dot-a file. Dot-txt files contain plain text data for a single cell for profiling purposes. Post-processing utilties are available in the HYCOM-tools repository.

The following table describes HYCOM output files.

Filename	Description
archs.YYYY_DDD_HH.(a,b,txt)	HYCOM surface archive data
archv.YYYY_DDD_HH.(a,b,txt)	HYCOM archive data
restart_out.(a,b)	HYCOM restart files

CICE6

CICE6 output is controlled via the namelist ice_in. The relevant configuration settings are

...
 histfreq       = 'm','d','h','x','x'
 histfreq_n     =  0 , 0 , 6 , 1 , 1
 hist_avg       = .true.
...

In this example, histfreq_n and hist_avg specify that output will be 6-hour means. No monthly (m), daily (d), yearly (x) or per-timestep (x) output will be produced.The hist_avg can also be set .false. to produce, for example, instaneous fields every 6 hours.

The output of any field is set in the appropriate ice_in namelist. For example,

...
&icefields_nml
f_aice         = 'mdhxx'
f_hi           = 'mdhxx'
f_hs           = 'mdhxx'
...

where the ice concentration (aice), ice thickness (hi) and snow thickness (hs) are set to be output on the monthly, daily, hourly, yearly or timestep intervals set by the histfreq_n setting. Since histfreq_n is 0 for both monthly and daily frequencies and neither yearly nor per-timestep output is requested, only 6-hour mean history files will be produced.

Further details of the configuration of CICE model output can be found in the CICE documentation Section 3.1.4.

WW3

The run directory includes WW3 binary outputs for the gridded outputs (YYYYMMDD.HHMMSS.out_grd.<grd>), point outputs (YYYYMMDD.HHMMSS.out_pnt.points) and restart files (YYYYMMDD.HHMMSS.restart.<grd>).

CMEPS

The CMEPS mediator writes general information about the run-time configuration to the file mediator.log in the model run directory. Optionally, the CMEPS mediator can be configured to write history files for the purposes of examining the field exchanges at various points in the model run sequence.

Additional Information about the FMS Diagnostic Manager

The FMS (Flexible Modeling System) diagnostic manager (FMS/diag_manager) manages the output for the ATM and, if present, the MOM6 component in the UFS Weather Model. It is configured using the diag_table file. Data can be written at any number of sampling and/or averaging intervals specified at run-time.

Diagnostic Manager Namelist

The diag_manager_nml namelist contains values to control the behavior of the diagnostic manager. Some of the more common namelist options are described in :numref:`Table %s <DiagManager>`. See FMS/diag_manager/diag_manager.F90 for the complete list or view the FMS documentation for additional information.

Namelist variables used to control the behavior of the diagnostic manager.

Namelist variable	Type	Description	Default value
max_files	INTEGER	Maximum number of files allowed in diag_table	31
max_output_fields	INTEGER	Maximum number of output fields allowed in diag_table	300
max_input_fields	INTEGER	Maximum number of registered fields allowed	300
prepend_date	LOGICAL	Prepend the file start date to the output file. .TRUE. is only supported if the diag_manager_init routine is called with the optional time_init parameter.	.TRUE.
do_diag_field_log	LOGICAL	Write out all registered fields to a log file	.FALSE.
use_cmor	LOGICAL	Override the missing_value to the CMOR value of -1.0e20	.FALSE.
issue_oor_warnings	LOGICAL	Issue a warning if a value passed to diag_manager is outside the given range	.TRUE.
oor_warnings_fatal	LOGICAL	Treat out-of-range errors as FATAL	.FALSE.
debug_diag_manager	LOGICAL	Check if the diag table is set up correctly	.FALSE.

This release of the UFS Weather Model uses the following namelist:

&diag_manager_nml
  prepend_date = .false.
/

Additional Information about the Write Component

The UFS Weather Model is built using the Earth System Modeling Framework (ESMF). As part of this framework, the output history files written by the model use an ESMF component, referred to as the write component. This model component is configured with settings in the model_configure file, as described in :numref:`Section %s <model_configureFile>`. By using the ESMF capabilities, the write component can generate output files in several different formats and several different map projections. For example, a Gaussian global grid in NEMSIO format, or a native grid in NetCDF format. The write component also runs on independent MPI tasks, and so the computational tasks can continue while the write component completes its work asynchronously. The configuration of write component tasks, balanced with compute tasks, is part of the tuning for each specific application of the model (HPC, write frequency, i/o speed, model domain, etc). For the global grid, if the write component is not selected (quilting=.false.), the FV3 code will write tiled output in the native projection in NetCDF format. The regional grid requires the use of the write component.

FilesExpand file tree

InputsOutputs.rst

Latest commit

History

InputsOutputs.rst

File metadata and controls

Data: Input, Model Configuration, and Output Files

Input files

ATM

Static Datasets (i.e., fix files)

Grid Description and Initial Condition Files

MOM6

Static Datasets (i.e., fix files)

Grid Description and Initial Condition Files

HYCOM

Static Datasets (i.e., fix files)

Grid Description and Initial Condition Files

CICE6

Static Datasets (i.e., fix files)

Grid Description and Initial Condition Files

WW3

Static Datasets (i.e., fix files)

Grid Description and Initial Condition Files

Mesh Generation

CDEPS

Static Datasets (i.e., fix files)

Grid Description and Initial Condition Files

GOCART

Static Datasets (i.e., fix files)

Grid Description and Initial Condition Files

UFS AQM

Static Datasets (i.e., fix files)

NOAH-MP (LND)

Static Datasets (i.e., fix files)

Grid Description and Initial Condition Files

Additional Files

Model configuration files

diag_table file

field_table file

model_configure file

ufs.configure file

fd_ufs.yaml

The Suite Definition File (SDF) File

datm.streams

datm_in

blkdat.input

Namelist file input.nml

fms_io_nml

namsfc

atmos_model_nml

gfs_physics_nml

Output files

UFSAtm

MOM6

HYCOM

CICE6

WW3

CMEPS

Additional Information about the FMS Diagnostic Manager

Diagnostic Manager Namelist

Additional Information about the Write Component

`diag_table` file

`field_table` file

`model_configure` file

`ufs.configure` file

`fd_ufs.yaml`

`datm.streams`

`datm_in`

`blkdat.input`

Namelist file `input.nml`

`namsfc`

`atmos_model_nml`