Camera init failed with error 0x105 #60
Description
When connecting to my esp32 cam board through thonny i get the following message into the shell:
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030,len:4832
load:0x40078000,len:16460
load:0x40080400,len:4
load:0x40080404,len:3504
entry 0x400805cc
E (358) esp_cor��&VW�}���͡� No core dump partition found!
E (358) esp_core_dump_flash: No core dump partition found!
E (475) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND)
Camera init failed with error 0x105
Device is busy or does not respond. Your options:
- wait until it completes current work;
- use Ctrl+C to interrupt current work;
- reset the device and try again;
- check connection properties;
- make sure the device has suitable MicroPython / CircuitPython / firmware;
- make sure the device is not in bootloader mode.
the connections, like the camera appear to be OK.
Also i cant programm the board through thonny. I can't the flash nor execute something. Even after CTRL+F2 the message "Device is busy or does not respond" reapears.