Bug - Relay Contact Switching Time

[JSGreggTech]

Hey Paul, thank you for all the hard work you've put into this project. This may or may not be an issue - I noticed when using individual relay contacts linked to a coil that the contacts close suddenly at the end of the coil switching time, as opposed to gradually like the pre-built relay. I'm taking advantage of the switching time for a project I'm working on. Thanks for your time,

JSGregg

RAM Module - Relay Version - D Flip Flop.txt

[esaruoho]

I've opened a PR to address this: pfalstad#289

The fix makes RelayContactElm (standalone relay contacts linked to a RelayCoilElm coil) smoothly interpolate resistance during the switching transition, rather than snapping instantly between on and off.

The coil now computes a fractional d_position (0 to 1) that ramps linearly over the switching time during state transitions, and passes it to linked contacts. Each contact uses resistance = r_on + (r_off - r_on) * d_position to smoothly transition. This matches the smooth behavior of the built-in RelayElm. Normal, on-delay, off-delay, and latching relay types are all handled correctly.