Vanilla schematics don't exist / Sources for officially provided vanilla schematics (that aren't the basic empty one)

[Rudi3]

I understand that user-generated schematics can be sensitive, but e.g. for the rock 4c plus the schematic ed7091ab924ef1406dadc4623c90f245868f03d262764ddc2c22c8a19eb37c1c that is provided in the docs is not easily reproducible. I can't find the yaml that was used to generate it. Maybe I'm missing something.

I'm trying to upgrade from an older version and the basic image that is generated by image factory boots, but seems to be missing nic related drivers/firmware. The official ed7091ab924ef1406dadc4623c90f245868f03d262764ddc2c22c8a19eb37c1c doesn't seem to be available for 1.7.7 - so I'm trying to figure out what was added to newer builds.
Maybe you can point me to that specific config? Thanks!

I think it would be beneficial if at least the schematics referenced in the docs had a source yaml.

Edit:
Even the newer versions of the schematic don't seem to exist: https://factory.talos.dev/image/ed7091ab924ef1406dadc4623c90f245868f03d262764ddc2c22c8a19eb37c1c/v1.11.0/metal-arm64.iso just 404s. Link found on https://docs.siderolabs.com/talos/v1.11/platform-specific-installations/single-board-computers/rock4cplus

[smira]

I'm not quite sure what is wrong in the docs (but they are wrong), but you don't need any of it.

You can use Image Factory UI to pick your borard and come up with a vanilla or customized schematic: https://factory.talos.dev/?arch=arm64&board=rock4cplus&cmdline-set=true&extensions=-&platform=metal&target=sbc&version=1.11.3

[Rudi3]

I thought that the image provided by the factory was missing something (like an additional overlay). But that doesn't seem to be the case. Thanks, I'll stick to picking directly from the factory, then.