Merge pull request #82 from MK16kawai/dev

Update the display documentation for LT9611.

Author: Neutree

docs/doc/en/vision/display.md

@@ -103,11 +103,12 @@ display.send_to_maixvision(img)
 
 If you wish to switch to a screen of a different size, you can consult and purchase from the [store](https://wiki.sipeed.com/store).
 
-For MaixCAM, the following four screen options are currently supported:
+For MaixCAM, currently, there are 4 types of screens and 1 type of MIPI to HDMI module supported:
 * 2.3-inch 552x368 resolution capacitive touch screen: The default screen that comes with MaixCAM.
 * 2.4-inch 640x480 resolution capacitive touch screen: The default screen that comes with MaixCAM-Pro.
 * 5-inch 854x480 resolution non-touch screen: Note that this is a non-touch screen, similar in size to a mobile phone screen.
 * 7-inch 1280x800 resolution capacitive touch screen: A large 7-inch screen, suitable for scenarios requiring a fixed screen display.
+* LT9611 (MIPI to HDMI module) supports various resolutions including 1280x720, suitable for driving various HDMI screens.
 
 The image refresh time difference between different screens is about 1-5 milliseconds, which is not significant; the main difference lies in the image resolution, which affects image processing time.
 
@@ -120,6 +121,15 @@ When replacing the screen, you must also **modify the configuration file**; othe
   * 2.4-inch (MaixCAM-Pro default screen): `st7701_lct024bsi20`.
   * 5-inch: `st7701_dxq5d0019_V0`, with the earlier (2023) test screen being `st7701_dxq5d0019b480854`.
   * 7-inch: `mtd700920b`, with the earlier (2023) test screen being `zct2133v1`.
+  * LT9611 (MIPI to HDMI module):
+    * Wiring:
+      * LT9611 I2C <---> MaixCAM I2C5
+      * LT9611 MIPI IN <---> MaixCAM MIPI OUT
+    * Supported configurations:
+      * `lt9611_1280x720_60hz`: 1280x720 60Hz
+      * `lt9611_1024x768_60hz`: 1024x768 60Hz
+      * `lt9611_640x480_60hz`: 640x480 60Hz
+      * `lt9611_552x368_60hz`: 552x368 60Hz
 * Save the `board` file, and **click to eject the USB drive**—do not just disconnect the power, or the file may be lost.
 * Press the board's `reset` button, or power cycle to restart.
 

docs/doc/zh/vision/display.md

@@ -104,11 +104,12 @@ display.send_to_maixvision(img)
 ## 更换其它型号屏幕
 
 如果想换不同尺寸的屏幕，可以到[商城](https://wiki.sipeed.com/store)咨询购买。
-对于 MaixCAM，目前支持 4 款屏幕：
+对于 MaixCAM，目前支持 4 款屏幕和 1 款 MIPI 转 HDMI 模块：
 * 2.3寸 552x368 分辨率电容触摸屏： MaixCAM 带的屏幕。
 * 2.4寸 640x480 分辨率电容触摸屏： MaixCAM-Pro 带的屏幕。
 * 5寸 854x480 分辨率无触摸屏： 注意无触摸，类似手机屏幕大小。
 * 7寸 1280x800 分辨率电容触摸屏：7寸大屏，适合更多需要固定屏幕观看场景。
+* LT9611（MIPI转HDMI模块） 支持1280x720等多种分辨率，适合驱动各种HDMI屏。
 
 不同屏幕的刷新图像时间差别在1～5毫秒，差别不是很大，主要的区别在于图像分辨率大了图像处理时间的差别。
 
@@ -121,7 +122,16 @@ display.send_to_maixvision(img)
   * 2.4寸（MaixCAM-Pro 自带屏幕）： `st7701_lct024bsi20`。
   * 5寸：`st7701_dxq5d0019_V0`  早期（2023年）测试屏幕`st7701_dxq5d0019b480854`。
   * 7寸：`mtd700920b`，早期（2023年）测试屏幕用 `zct2133v1`。
-* 保存`board`，并且**点击弹出 U 盘**，不要只接断电，否则可能文件丢失。
+  * LT9611（MIPI转HDMI模块）：
+    * 接线：
+      * LT9611 I2C <---> MaixCAM I2C5
+      * LT9611 MIPI IN <---> MaixCAM MIPI OUT
+    * 支持的配置
+      * `lt9611_1280x720_60hz`: 1280x720 60Hz
+      * `lt9611_1024x768_60hz`: 1024x768 60Hz
+      * `lt9611_640x480_60hz`:  640x480  60Hz
+      * `lt9611_552x368_60hz`:  552x368  60Hz
+* 保存`board`，并且**点击弹出 U 盘**，不要直接断电，否则可能文件丢失。
 * 按下板子的`reset`按键，或者重新上电启动。