Sipeed Maix Amigo board support

[kallisti5]

Seeed Studio is now shipping the Sipeed Maix Amigo devices. These are powered via the Kendryte K210 (like the other Maix devices)

Platform information

• SoC – Kendryte K210 Dual-core 64-bit RISC-V (RV64GC) processor with FPU @ 400 MHz (overclockable to 500MHz), 8MB SRAM, built-in AI accelerators for video and audio
• Storage – 16MB Flash, MicroSD card slot up
• Display – 3.5-inch TFT capacitive touch screen display with 480×320 resolution
• Camera
  • VGA front-facing camera up to 30 fps (GC0328 sensor)
  • VGA rear camera up to 60 fps (OV7740 sensor)
• Audio – 6+1 microphone array
• USB – 1x USB Type-C port for power and programming
• Expansion
  • 3x Grove ports with I2C, GPIO, etc…
  • 3x 8-pin SP-MOD headers with GPIOs, 3.3V, and GND signals; compatible with ESP-01 ESP8266 WiFi module, PSRAM modules, etc…
• Sensor – Accelerometer
• Misc – Reset button, 3x function buttons, 3x LEDs
• Battery – 520 mAh Lithium battery
• Power Supply – Via USB-C port
• Dimensions – 104.3 x 63.3 x 16.5mm

It looks like Sipeed has done "something" here for platformio. Guessing it wasn't upstreamed
https://dl.sipeed.com/MAIX/platformio/dl-packages

[kallisti5]

@ivankravets can you help here? Seeedstudio documents PlatformIO support on the Maix Amigo, but there is zero support.
It doesn't look like a lot of work needs done, but the board needs defined within platform-kendryte210

[junhuanchen]

Will. This needs to be added to the configuration file, but not yet processed.

[vamoosebbf]

@ivankravets can you help here? Seeedstudio documents PlatformIO support on the Maix Amigo, but there is zero support.
It doesn't look like a lot of work needs done, but the board needs defined within platform-kendryte210

Both MaixCube and MaixAmigo can choose to develop MaixDuino, they are compatible, refer to the configuration above