You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
The [SparkFun Qwiic Air Quality PM1/PM2.5/PM10 Sensor - BMV080]() is an ultra-small, fan-less air quality sensor for sensing PM2.5 particulate matter! Within the enclosure is a breakout board that breaks out Bosch's BMV080, the world's smallest PM2.5 air quality sensor. The sensing element measures merely 4.2mm x 3.5mm x 3.1mm (W x L x H), which is more than 450 times smaller than any comparable device on the market. The innovative design is based on ultra-compact lasers with integrated photodiodes. The sensor applies sophisticated algorithms to measure PM2.5 concentration directly in free space, without requiring an intrusive fan. <!-- PM1 and PM10 concentrations can also be measured as well! -->
4
+
The [SparkFun Qwiic Air Quality PM1/PM2.5/PM10 Sensor - BMV080](https://www.sparkfun.com/catalog/product/view/id/26554) is an ultra-small, fan-less air quality sensor for sensing PM1 and PM2.5 particulate matter! Within the enclosure is a breakout board that breaks out Bosch's BMV080, the world's smallest PM1 and PM2.5 air quality sensor. The sensing element measures merely 4.2mm x 3.5mm x 3.1mm (W x L x H), which is more than 450 times smaller than any comparable device on the market. The innovative design is based on ultra-compact lasers with integrated photodiodes. The sensor applies sophisticated algorithms to measure PM1 and PM2.5 concentrations directly in free space, without requiring an intrusive fan. <!-- PM10 concentrations can also be measured as well! -->
<b>SparkFun Qwiic Air Quality PM1/PM2.5/PM10 Sensor - BMV080</b>
18
18
<br />
19
19
SEN-26554
20
20
<br />
21
-
<center>[Purchase from SparkFun :fontawesome-solid-cart-plus:](https://){ .md-button .md-button--primary }</center>
21
+
<center>[Purchase from SparkFun :fontawesome-solid-cart-plus:](https://www.sparkfun.com/catalog/product/view/id/26554){ .md-button .md-button--primary }</center>
22
22
</a>
23
23
</div>
24
24
@@ -162,12 +162,12 @@ We recommend using any board with an ESP32 (such as the ESP32-WROOM, ESP32-S2, a
162
162
163
163
164
164
165
-
### Qwiic Cables
165
+
### Qwiic Accessories
166
166
167
167
For those that want to take advantage of the Qwiic connector, you'll want to grab a Qwiic cable. Besides the one listed earlier, there are a variety of other cable lengths available in the SparkFun catalog to choose from.
168
168
169
169
<divclass="grid cards col-4"markdown>
170
-
170
+
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
@@ -226,11 +226,60 @@ For those that want to take advantage of the Qwiic connector, you'll want to gra
226
226
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
227
227
</div>
228
228
229
+
You'll also want a Qwiic MultiPort when daisy chaining more than one BMV080 or adding additional Qwiic-enabled devices. Adding displays will allow you to view the amount of particulate mater in the air.
230
+
231
+
<divclass="grid cards col-4"markdown>
232
+
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
275
+
</div>
276
+
277
+
229
278
230
279
### Tools (Optional)
231
280
232
281
!!! note
233
-
When soldering directly to the PTHs, you will need to be careful of the 3D printed enclosure! You will want to carefully remove the board from the enclosure when soldering.
282
+
When soldering directly to the PTHs, you will need to be careful of the 3D printed enclosure! You will want to carefully remove the board from the enclosure before soldering.
234
283
235
284
You will need a soldering iron, solder, and [general soldering accessories](https://www.sparkfun.com/categories/49) for a secure connection when using the plated through holes.
236
285
@@ -322,26 +371,66 @@ You will need a soldering iron, solder, and [general soldering accessories](http
322
371
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
323
372
</div>
324
373
374
+
For users that are using the BMV080 in SPI mode or mounting the enclosure, make sure to grab the iFixit Moray Driver Kit. A precision flathead with 0.1mm tip is needed to remove the sensor from the enclosure. We also recommend using Phillips screwdriver with #0 tip and 4-40 standoffs when mounting the enclosure.
325
375
326
-
### Prototyping Accessories (Optional)
376
+
<divclass="grid cards col-4"markdown>
377
+
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
Depending on your setup, you may want to use IC hooks for a temporary connection. However, you will want to solder header pins to connect devices to the plated through holes for a secure connection. We opted for right angle headers for the SparkFun Qwiic Air Quality PM1/PM2.5/PM10 Sensor - BMV080 as well as M/F jumpers to connect to the RedBoard IoT Development Board to reduce the amount of soldering.
384
+
---
329
385
330
-
<divclass="grid cards col-4"markdown>
386
+
<ahref="https://www.sparkfun.com/products/25568">
387
+
<b>iFixit Moray Driver Kit</b>
388
+
<br />
389
+
TOL-14456
390
+
</a>
391
+
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
<b>Screw - Phillips Head (1/4", 4-40, 10 pack)</b>
417
+
<br />
418
+
PRT-14456
419
+
</a>
420
+
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
421
+
</div>
422
+
423
+
424
+
425
+
426
+
### Prototyping Accessories (Optional)
427
+
428
+
!!! note
429
+
Due to the size of the 3D printed enclosure, you will not be able to place the sensor on a breadboard. We recommend using M/F jumper wires should you decide to solder male header pins on the sensor. Of course, when soldering the sensor to a protoboard, you could solder to the other side of the protoboard to access the pins.
430
+
431
+
Depending on your setup, you may want to use IC hooks for a temporary connection when the sensor is removed from enclosure. However, you will want to solder header pins to connect devices to the plated through holes for a secure connection. We opted for straight male headers for the SparkFun Qwiic Air Quality PM1/PM2.5/PM10 Sensor - BMV080 as well as M/F jumpers to connect to the RedBoard IoT Development Board to reduce the amount of soldering.
432
+
433
+
<divclass="grid cards col-4"markdown>
345
434
<!-- ----------WHITE SPACE BETWEEN PRODUCTS---------- -->
0 commit comments