-
Notifications
You must be signed in to change notification settings - Fork 0
/
Copy pathgdb-server-out.log
76 lines (72 loc) · 3.78 KB
/
gdb-server-out.log
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
[2024-11-12T16:20:00.434Z] SERVER CONSOLE DEBUG: onBackendConnect: gdb-server session connected. You can switch to "DEBUG CONSOLE" to see GDB interactions.
openocd -c "gdb_port 50000" -c "tcl_port 50001" -c "telnet_port 50002" -s /home/tbennett/H5NuttxPort -f /home/tbennett/.vscode-server/extensions/marus25.cortex-debug-1.12.1/support/openocd-helpers.tcl -f board/st_nucleo_h5.cfg -c "CDRTOSConfigure nuttx" -c "adapter speed 200"
Open On-Chip Debugger 0.12.0-00024-g34afaa939 (2024-10-24-12:29) [https://github.com/STMicroelectronics/OpenOCD]
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
CDLiveWatchSetup
Info : DEPRECATED target event trace-config; use TPIU events {pre,post}-{enable,disable}
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
Info : target type name = cortex_m
adapter speed: 200 kHz
Info : Listening on port 50001 for tcl connections
Info : Listening on port 50002 for telnet connections
Info : STLINK V3J13M4 (API v3) VID:PID 0483:374E
Info : Target voltage: 3.281861
/home/tbennett/.vscode-server/extensions/marus25.cortex-debug-1.12.1/support/openocd-helpers.tcl: stm32h5x.cpu configure -rtos nuttx
Info : clock speed 200 kHz
Info : stlink_dap_op_connect(connect)
Info : SWD DPIDR 0x6ba02477
Info : [stm32h5x.cpu] Cortex-M33 r0p4 processor detected
Info : [stm32h5x.cpu] target has 8 breakpoints, 4 watchpoints
stm32h5x.cpu in Non-Secure state
stm32h5x TrustZone disabled
stm32h5x.cpu work-area address is set to 0x20000000
stm32h5x.cpu work-area is enabled
Info : gdb port disabled
Info : starting gdb server for stm32h5x.cpu on 50000
Info : Listening on port 50000 for gdb connections
Info : accepting 'gdb' connection on tcp/50000
Error: No symbols for NuttX
Info : device idcode = 0x10076484 (STM32H56/H57xx - Rev X : 0x1007)
Info : TZEN = 0xC3 : TrustZone disabled by option bytes
Info : Product State = 0xED : 'Open'
Info : flash size = 2048kbytes
Info : flash mode : dual-bank
Info : device idcode = 0x10076484 (STM32H56/H57xx - Rev X : 0x1007)
Info : TZEN = 0xC3 : TrustZone disabled by option bytes
Info : Product State = 0xED : 'Open'
Info : flash size = 2048kbytes
Info : flash mode : dual-bank
Info : New GDB Connection: 1, Target stm32h5x.cpu, state: halted
undefined debug reason 8 - target needs reset
Error: Failed to read memory at 0x20000eb4
Error: target_read_u32 : ret = -306
Info : Unable to match requested speed 480 kHz, using 200 kHz
Info : Unable to match requested speed 480 kHz, using 200 kHz
[stm32h5x.cpu] halted due to debug-request, current mode: Thread
xPSR: 0xf9000000 pc: 0x0800275c msp: 0x20002df4
Info : Unable to match requested speed 480 kHz, using 200 kHz
Info : Unable to match requested speed 480 kHz, using 200 kHz
[stm32h5x.cpu] halted due to debug-request, current mode: Thread
xPSR: 0xf9000000 pc: 0x0800275c msp: 0x20002df4
Info : Padding image section 0 at 0x0802f173 with 1 bytes
Info : Unable to match requested speed 480 kHz, using 200 kHz
Info : Unable to match requested speed 480 kHz, using 200 kHz
[stm32h5x.cpu] halted due to debug-request, current mode: Thread
xPSR: 0xf9000000 pc: 0x0800275c msp: 0x20002df4
Info : Unable to match requested speed 480 kHz, using 200 kHz
Info : Unable to match requested speed 480 kHz, using 200 kHz
[stm32h5x.cpu] halted due to debug-request, current mode: Thread
xPSR: 0xf9000000 pc: 0x0800275c msp: 0x20002df4
Error: Failed to read memory at 0x20000eb4
Error: target_read_u32 : ret = -306
Error: Failed to read memory at 0x00000000
Error: Failed to read memory at 0x00000000
Error: Failed to read memory at 0x00000000
Error: Failed to read memory at 0x00000000
Error: Failed to read memory at 0x00000000
Error: Failed to read memory at 0x00000000
Error: Failed to read memory at 0x00000000
Error: Failed to read memory at 0x00000000
Error: Failed to read memory at 0x00000000