[New Variant] request list

[fpistm]

Hereafter the list of all new variants requested and their linked issue.
Feel free to file an new issue then it will be added to this list.

Note

This is a community projects.
Any contribution is welcome, so feel free submit a PR. 😉

Important

To add a STM32 based board follows this wiki

Board support requested:

Discovery

• STM32F429IDISCOVERY (STM32F429IDISCOVERY #2026)
• STM32F469iDiscovery ([New Variant]STM32F469iDiscovery #571)
• STM32H750B-DK Discovery Kit ([New Variant] request list #722 (comment))
• STM32H735G-DK Discovery Kit ([New Variant] request list #722 (comment))
• STM32H745I-DISCO Discovery Kit ([New Variant] request list #722 (comment))
• STM32L4R9I-DISCO

Nucleo

• Nucleo-F334R8 (https://www.stm32duino.com/viewtopic.php?f=43&t=569)
• NUCLEO-F413ZH (NUCLEO-F413ZH #1262)
• NUCLEO-G491RE ([New Variant] request list #722 (comment))
• NUCLEO-H745ZI-Q ([New Variant] request list #722 (comment)) and (STM32 Nucleo-H745ZI-Q STM32H745ZIT6 #2090)
• NUCLEO-H755ZI-Q ([New Variant] request list #722 (comment)) and (Support for H755ZI #2147)
• Nucleo-L011K4 (L011K4 #843)
• NUCLEO L412RB-P (Add board NUCLEO L412RB-P #1350 and [New Variant] NUCLEO-L412RB-P #2663)
• Nucleo-U545RE-Q Add support for Nucleo U545RE-Q #2494

Generic / Custom

• STM32F030CC ([New Variant] request list #722 (comment)) and (Is the STM32F030CCT6 chip supported?  #2337)
• STM32F030RC chip ([New Variant] Add support for STM32F030RC chip #1356)
• STM32F051R8T (Update boards.txt for stm32f0discovery (MB1034B) #1913)
• Demo F070F6 ([STM32F070] #1146) variant of F070F4
• STM32F105RCT6 (Support STM32F105RCT6  #1925)
• Can Filter with STM32F105RBT6 ([New Variant] Can Filter with STM32F105RBT6 #869)
• HY-ministm32v ([New Variant] request list #722 (comment))
• Open107V from Waveshare [New Variant] Open107V from Waveshare #815
• Pyboard ([New Variant]Pyboard #906)
• Stm32f373_BluePill (Second SPI not working for LCD ST7920 or SPI Flash W25Q128 using with STM32F103C8T6 (Blue Pill) or STM32F401CCU (Black Pill) #1085)
• BLACK_F407VE_Mini ([New Variant]BLACK_F407VE_Mini #1083)
• STM32F407ZGT6 Mini ([New variant] STM32F407ZGT6 Mini & STM32F103ZET6 Mini #635)
• STM32F411VET6 ( [New Variant] #1314)
• STM32F437VGT6 (STM32F437VGT6 #1535)
• STM32F722, STM32F745, STM32F765 ([New Variant] request list #722 (comment))
• STM32G0B0KET6 (STM32G0B0KET6 #2656)
• STM32H563VI (Support for STM32H563VI #2089)
• STM32H723VGT6 WeAct Studio ([New Variant] STM32H723VGT6 WeAct Studio #2606)
• Portenta (STM32H747XI or Portenta H7 #1984) and other Arduino STM32 based boards (Support for the new Arduino boards #2168)
• STM32L071 (Support STM32L071 MCU #1229, [New Variant] - L071 #1879)
• STM32L100RB (Add support for STM32L100RB #989)
• STM32L151RCT6 (STM32L151RCT6 #1608)
• STM32L496VGT (Support for the STM32L496VGTx series #2021)
• STM32L4R9AI
• STM32L4P5AGIxP (Generic L4P5AGIxP #1905)
• STM32U585CI ([New Variant] Support STM32U585CI #1977)
• STM32WL5MOCH (variants/STM32WLxx/WL5MOCH missing from boards.txt #2539)

3D printer:

• BIGTREETECH BTT SKR PRO V1.2 ([New Variant] STM32F407ZGT6 - BIGTREETECH BTT SKR PRO V1.2 #1284)

LoRa:

• Heltec LoRa Node L151 ([New Variant][on way] Heltec LoRa Node L151 #983) initial support at https://github.com/fthiebolt/LoRa-boards-stm32duino
• RAK811 Wis DUO (STM32L(RAK811 chip) RAK811 Wis DUO #1395)
• RAK3172: (RAK3172 "WLE5CCU6" STM32LoRaWAN#7)
  • RAK3172-Evaluation-Board
    • RAK3172-SiP

Done

• 3D printer board support (3D printer board support #347)
• STM32G0316-DISCO
• 32F413HDISCOVERY ([New Variant] request list #722 (comment))
• STM32H747I-DISCO board (Support for STM32H747I-DISCO board #1106 and [New Variant] request list #722 (comment))
• STM32MP1 boards support Support added thanks @kbumsik in [New variant] STM32MP157_DK  #717
• Nucleo-F031K6 ([New Variant] request list #722 (comment))
• NUCLEO-F042K6 ([New Variant] Nucleo 32 - STM32F042K6 #1099)
• (Nucleo-F439ZI](https://www.st.com/en/evaluation-tools/nucleo-f439zi.html) Nucleo-F439ZI support #2324. Done thanks Initial support for Nucleo-F439ZI #2347.
• Nucleo-F446ZE Would it be possible to provide support for the Nucleo F446ZE card? #1970. Done thanks Add variant: add support for generic F446Z(C-E)(H-J-T) and Nucleo-F446ZE #2108.
• Nucleo-F746ZG (NUCLEO-F746ZG #715)
• Nucleo G031k8 (STM32G031K8T6 #855)
• Nucleo-G070RB ([New Variant] add support for Nucleo64 STM32G070 #1147 Nucleo-G070RB #1651)
• STM32G474CEU6 (STM32G474CEU6 for WeAct Boards #2605) --> done variant(g4): Add WeActStudio.STM32G474CoreBoard support #2615
• Nucleo-L010RB (STM32L010rb support #662)
• NUCLEO-L552ZE-Q Requested here
• Nucleo 144 F722ZE (Nucleo 144 F722ZE #1259)
• NUCLEO-H743ZI ([New Variant] request list #722 (comment))
• NUCLEO-H753ZI ([New Variant] request list #722 (comment)) --> Done thanks Support for NUCLEO-H753ZI board #2130
• NUCLEO-H723ZG ([New Variant] request list #722 (comment))
• NUCLEO-H503RB ([New Variant] request list #722 (comment)) Fixed by variant(H5): add generic H503RB and Nucelo H503RB #2117
• BlackPill STM32F411CEU6
• BlackPill F401CE [New Variant] Please add BlackPill F401CE #1143
• STM32F103Vx (please support f103v #958)
• STM32F103ZET6 Mini ([New variant] STM32F407ZGT6 Mini & STM32F103ZET6 Mini #635)
• MCUDev DevEBox STM32H7XX_M board (STM32H750VBT6) (Support for MCUDev DevEBox STM32H7XX_M board (STM32H750VBT6) #1145, [New Variant] Generic STM32H743VIT6 #1172, [New Variant] STM32H743VIT6 (and STM32H750VBT6) #1266)
• Leafony STM32 (Leafony STM32  #1887) --> done thanks variants: add Leafony AP03 #1889
• STM32F412ZG (Stm32f412zg support #1899)
• STM32H750XB (STM32H750XB #1982)
• STM32F446ZE (Pls add STM32F446ZE to supported controllers. #2074). Done thanks Add variant: add support for generic F446Z(C-E)(H-J-T) and Nucleo-F446ZE #2108.
• STM32C011J6 (STM32C011J6M6 #2210 and [New Variant] request list #722 (comment)) --> Done Adding support for stm32c011j4m6 #2359
• STM32F030K6 ([New Variant] STM32F030K6 #1357) --> done Added F0 boards #1792
• RAK3172-Module --> done thanks Add RAK3172 module #2005
• RAK3271T ([New Variant] Support for RAK3271T #2162) --> done thanks Added RAK3172T Variant #2431
• STM32C071Rx (Add support for STM32C071Rx #2536) --> done feat: Generic variant C071RBTx support #2556
• NUCLEO-C071RB ([New Variant] NUCLEO-C071RB #2537) --> Done feat: Add variant NUCLEO-C071RB #2558
• NUCLEO-H7A3ZI-Q ([New Variant] request list #722 (comment), NUCLEO-U575ZI-Q memory size incorrect in Arduino IDE showing 256 kbytes should be 786 kbytes #1827 (comment) and [New Variant] Nucleo STM32H7A3ZITxQ #2632)
• STM32F407IGH ([New Variant] STM32F407IGH #2589) --> done thanks add support for stm32F407IGHx #2649
• STM32F407IGT6 ([New Variant] does this lib support STM32F407IGT6? #2131)--> done thanks add support for stm32F407IGHx #2649

[Hedda]

What about the new STM32MP1 MPU series which has both a Cortex-A7 as well as an onboard Cortex-M4 microcontroller unit?

https://blog.st.com/stm32mp1-mpu-stm32mp157a-ev1-stm32mp157c-dk2/

https://www.cnx-software.com/2019/02/21/stmicro-stm32mp1-cortex-a7-m4-mpu/

Seeed Studio ODYSSEY-STM32MP157C SBC based on Seeed Studio SoM-STM32MP157C SoM

https://www.cnx-software.com/2020/01/21/odyssey-stm32mp157c-sbc-feature-stmicro-stm32mp157c-cortex-a7-m4-soc/

Emtrion emSBC-Argon

https://www.cnx-software.com/2019/07/18/emtrion-emsbc-argon-stm32mp1-dual-cortex-a7-m4-processor/

i2Som PanGu board from I2Som:

https://www.cnx-software.com/2019/06/25/pangu-board-stm32mp1-sbc/

MYIR MYD-YA157C development board based on their MYiR MYC-YA157C STM32MP1 CPU Module

https://www.cnx-software.com/2020/01/07/myir-launches-som-development-board-based-on-stm32mp1-microprocessor/

Avenger96 96Boards CE Extended Board Features an STMicro STM32MP1 SoM

https://www.cnx-software.com/2019/02/23/avenger96-96boards-stmicro-stm32mp1-som/

Shiratech Stinger96 board (96Boards board design)

https://www.cnx-software.com/2020/05/15/stinger96-nb-iot-emtc-and-avenger96-96boards-stm32mp1-sbcs-giveaway/

Direct Insight / Ka-Ro STM32MP1 QSMP 1570 / 157C SoM module and development kit with reference board:

https://www.cnx-software.com/2020/06/26/linux-powered-stmicro-stm32mp1-solder-down-qfn-style-som-measures-27x27mm/

Could we also request support for STM32MP1 (STM32 MP1) that comes onboard STM32MP157A-DK1 development board?

https://www.st.com/en/evaluation-tools/stm32mp157a-dk1.html

STM32MP157A-DK1 development board also come with the STM32MP157C-DK2 Discovery Kit

https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html

STM32MP157A-DK1 and STM32MP157C-DK2 Discovery kits are $99 with LCD or $69 without
https://www.st.com/en/evaluation-tools/stm32mp157a-dk1.html
https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html

STM32MP157A-EV1 Evaluation kit for PCB engineers does have a steeper price at $399
https://www.st.com/en/evaluation-tools/stm32mp157a-ev1.html

Several other boards with STM32MP1 have been announced but none released yet AFIK.

[justind000]

Picked up STM32G0316-DISCO the other day. It'd be nice to port over. It's close to an ATTiny85 alternative.

[MCUdude]

It would be great if we could have more generic chip options. I'm particularly interested in the 48 and 64 pin versions of the STM32F401 and STM32F411, but these will be used on custom hardware and not board like the Nucleo. The F401 and F411 are also very reasonably priced on LCSC.com.

I've been a pro AVR user for years now, but have very experience with STM32. Let's say I start working on a pin definition file for all 48-pin F401C's. Can we use the same pin definition files for all variants (F401CB/CC/CD/CD)? And are there guidelines on how the Arduino pinout should look like? Perhaps similar/identical to other supported STM32's?

[kbumsik]

@MCUdude
As far as I understand about this project, it can support all generic chips, since it pulled from the official STM32 Cube libraries.
The problem is that it is just impossible to define generic pinouts for all possible chips because Arduino platform requires flattened pinout definitions (like PA14 => Arduino Digial 1 pin). You should modify the source code to define your own board.
The good news is that you don't need to do much works since Arduino_Core_STM32 already supports STM32F401 Series, so you only need to define a new variant. You can see the wiki to figure out how to define your own variant and see here to learn how to work with the source code.

Can we use the same pin definition files for all variants (F401CB/CC/CD/CD)?

You should look at the datasheet to see if they have the same pinouts, but as far as I know they have different memories and the same package/pinouts.