Update README.md

Signed-off-by: Carlo Parata <[email protected]>

Author: cparata

README.md

@@ -20,9 +20,9 @@ You need to connect the VL53L8CX-SATEL sensor board directly to the Nucleo board
  - pin 6 (MCLK_SCL) of the VL53L8CX satellite connected to pin D15 (SCL) of the Nucleo board
  - pin 7 (PWREN) of the VL53L8CX satellite connected to pin D11 of the Nucleo board
  - pin 8 (I0VDD) of the VL53L8CX satellite not connected
- - pin 9 (3V3) of the VL53L8CX satellite connected to 3V3 of the Nucleo board
+ - pin 9 (3V3) of the VL53L8CX satellite not connected
  - pin 10 (1V8) of the VL53L8CX satellite not connected
- - pin 11 (5V) of the VL53L8CX satellite not connected 
+ - pin 11 (5V) of the VL53L8CX satellite connected to 5V of the Nucleo board 
  - GPIO1 of VL53L8CX satellite connected to A2 pin of the Nucleo board (not used)
  - GND of the VL53L8CX satellite connected to GND of the Nucleo board
 
@@ -35,9 +35,9 @@ You need to connect the VL53L8CX-SATEL sensor board directly to the Nucleo board
  - pin 6 (MCLK_SCL) of the VL53L8CX satellite connected to pin D3 (MCLK_SCL) of the Nucleo board
  - pin 7 (PWREN) of the VL53L8CX satellite connected to pin D11 of the Nucleo board
  - pin 8 (I0VDD) of the VL53L8CX satellite not connected
- - pin 9 (3V3) of the VL53L8CX satellite connected to 3V3 of the Nucleo board
+ - pin 9 (3V3) of the VL53L8CX satellite not connected
  - pin 10 (1V8) of the VL53L8CX satellite not connected
- - pin 11 (5V) of the VL53L8CX satellite not connected
+ - pin 11 (5V) of the VL53L8CX satellite connected to 5V of the Nucleo board
  - GPIO1 of VL53L8CX satellite connected to A2 pin of the Nucleo board (not used)
  - GND of the VL53L8CX satellite connected to GND of the Nucleo board