premade images #111
Replies: 36 comments
-
|
I don't have any SD images now, because there are a lot of possible configurations that I'll need to support. For quick start you can use image from https://github.com/bortek/EZ-WifiBroadcast/wiki. On raspberry pi run:To start capture RTP stream from raspberry pi camera run: To broadcast RTP stream: On your host machine run:To receive RTP stream: To play RTP stream: |
Beta Was this translation helpful? Give feedback.
-
|
Would this be a good use for docker? |
Beta Was this translation helpful? Give feedback.
-
|
@dagar |
Beta Was this translation helpful? Give feedback.
-
|
You might want to try semaphoreci for docker builds. I believe it will take care of your authentication with docker hub outside of the repo. |
Beta Was this translation helpful? Give feedback.
-
|
Prebuilt binaries for raspberry pi: |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I want to test your version of wifibroadcast with low latency. < For quick start you can use image from https://github.com/bortek/EZ-WifiBroadcast/wiki. But I don't know what to do with your prebuilt binaries. I can't find where to replace them in borteks image ! I need a little help, please ... ps : have you ever think of sharing your code with bortek ? Perhaps he could include it for next updates. (I'm sad when I see people working each on its own side ...) |
Beta Was this translation helpful? Give feedback.
-
|
You can only get modified kernel (from /boot) from these images. And use clear image with this kernel and wifibroadcast binaries. Prebuild wifibroadcast binaries for raspberry pi are in "Releases" section. Or you can build it manually if you have linux with docker installed. Run |
Beta Was this translation helpful? Give feedback.
-
|
I tested my setup but on the groundstation I get the error: erroneus pipline: no element "avdec_h264" after trying to play the RTP stream. Another problem is that it says "unable to decode package #xxxxxx" |
Beta Was this translation helpful? Give feedback.
-
|
What is your pipeline? |
Beta Was this translation helpful? Give feedback.
-
|
I have did it like here: https://dev.px4.io/en/qgc/video_streaming_wifi_broadcast.html |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Okay after installing gstreamer1-libav it works to decode the video but.. I can see only 1/4 of the screen the remaining screen is green. What I can see is blurred and it updates very slow every 2 secounds. On the terminal i can see that it looses a lot of packages but it detected a session then i get a lot of unable to decrypt.. |
Beta Was this translation helpful? Give feedback.
-
|
1142666 PKT 0:0:0:0:0:0 |
Beta Was this translation helpful? Give feedback.
-
|
Do you have patched kernel (rtl2800 driver) on TX side?
to /etc/NetworkManager/NetworkManager.conf |
Beta Was this translation helpful? Give feedback.
-
|
why dont you just make a image that can be put straight onto a sd card rather than making people deal with all these patches. |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Three independent usb busses can connect wifi card, LTE modem and pi zero (via usb net) without any external usb hub and provide fair 480mbit/s for every usb channel. |
Beta Was this translation helpful? Give feedback.
-
|
why cant the video encoding be done on the neo2? |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Okay finally it works even without kernel patches. |
Beta Was this translation helpful? Give feedback.
-
|
So, what's the working process in case I have two RPIs and using PiCamera, and have 18.12.1 image downloaded.
|
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Cool. |
Beta Was this translation helpful? Give feedback.
-
|
It run in background by default as systemd service (wifibroadcast@drone or wifibroadcast@gs) |
Beta Was this translation helpful? Give feedback.
-
|
It's really the correct software I'm looking for. Will try it soon. |
Beta Was this translation helpful? Give feedback.
-
|
Hi @svpcom , maybe it´s interesting to take a look at https://github.com/HD-Fpv/Open.HD_Image_Builder . That´s a collecting of scripts which create a fresh Open.HD image. |
Beta Was this translation helpful? Give feedback.
-
|
I know about OpenHD, but it just a collection of bad-structured shell scripts around RPI+pi camera only. The problem of most security ip-cameras is a high latency (it can be up to several seconds). For FPV you need machine-vision cameras. |
Beta Was this translation helpful? Give feedback.
-
|
Well, even if the Image builder is not structured to the highest level it is at least working. Maybe you could create some structured shell scripts? I like your solution, but takes quite some steps to get it running. Just for my understanding: Which component inside an IP camera takes that long (encoder, network etc...)? |
Beta Was this translation helpful? Give feedback.
-
|
@Seeelefant I prefer to follow classic UNIX way - make small services but not monolithic system. WFB can be build by Most of security cameras are proprietary SoC, so even if you know what part is bad you unable to fix it. They don't have any public docs, so I don't want to invest my time to hacking device which can be EOL on the next year. |
Beta Was this translation helpful? Give feedback.
-
|
Hi to all, I'm now able to build an image which should work on both drone and gs side with a few modifications on each side. My setup :
Both Pis are ethernet connected with my desktop, and I can ssh to them. The 2 Pis are booting perfectly, and the 2 wifi boards are up and in monitor mode. But using "wfb-cli gs" on the gs Pi, I can see that all 3 connections failed (refused by the other side) So if someone has time to read my guide and find what is wrong or missing, I will share my image as soon as it will work. Thanks for your help !! |
Beta Was this translation helpful? Give feedback.
-
could you provide some pre made SD images to make trying your system easer?
Beta Was this translation helpful? Give feedback.
All reactions