Pictures of running TerrariumPI system

[theyosh]

I would like to know how people are using this software. As I have developed a lot of user features, which is cool, I could imagine that there should be at least a dozen TerrariumPIs running. So I was wondering if you can send me photo's of the environment that is powered by this software.

You can upload images to this issue. Just to see how you all using it! Maybe we can even share handy tips...

[jornobe]

This is my 2m40x1m50x65 Chinese Waterdragon enclosure. Just recently added the TerrariumPi to get better control on the environment. Have been using a mix of wifi sockets, timers and thermostats but it was all too static.

What I currently have attached to TerrariumPi:

• Rain system triggered by humidity controlled environment
• 3x 50W SolarRaptor HID bulbs controlled by lights environment
• 2 Ceramic Heat Emitters controlled by temperature environment
• Temperature sensor in the pool
• Temperature sensors on the basking spots
• 2 Nest outdoor cams for live monitoring and be able to rewind and check animal behaviour

Upcoming additions:

• Install second Pi for humidifier control based on second humidity sensor and trigger humidifier
• Connect pool heater to second Pi and add temperature environment
• Install door sensors and set humidity environments to not trigger when doors are open
• Prepare larger case to keep all componente safely together

[kaju666]

What I currently have attached to TerrariumPi:

• 2x DS18B20 in COLD and HEATED FLOOR AREA
• LED LIGHT controled by relay
• Half Heated floor using cable and controled by relay
• DHT22 for humidity and AIR temperature show
• RPI CAMERA v1.3

Upcoming works:

• ADD longer (2m) RPI Camera tape.
• Print and mount a holder for camera
• Find a place for dht22 sensor.
• Night led light

Terrarium View:

Control box

My new family member :P

And picture form mounted camera

[Natrixz]

Some older pictures of one of my enclosures, this one is for a Brazilian Rainbow Boa.
Plants etc have changed quite a bit but other than that;

Pi running;
3x TaaraLabs Humidity and Temp sensor through OneWire
2x DS18B20 for extra temperature and water temperature for my Mistking system
1x Energenie EG-PMS2
2x Jungle Dawn LED Lights
1x Arcadia T5 UVB
1x Arcadia Deep Heat Projector
1x Mistking System
1x HC-SR04

My second enclosure runs pretty much the same system, 3rd system is currently being build up.
Both second and third system are for Emerald Tree Boa's.
Might figure out a way to heat the water with some heat cable's so I can spray with warmer water.

@jornobe curious to your solution to do that =)

[jornobe]

@Natrixz instead of heat cables you could add a 25W aquarium heater (with thermostat) inside the water supply (I use a 40L jerrycan) and attach it to a sensor to cut off power when the water level goes below a certain point. Could connect the pump of the rain system to the same sensor to disable the system completely if needed.

[Natrixz]

Awesome idea! That’s gonna be my next project times 2 haha :)
Thanks @jornobe :)

[theyosh]

Live version https://terrarium.theyosh.nl

Running:

• Multiple temperature sensors (OWFS)
• Multiple humidity sensors (OWFS)
• Multiple MyFlora sensors
• Door sensors
• Sprayer power
• Heating power
• Lights power
• Height sensor for water level
• RaspiCam
• Remote cam

It houses a Madagascar (giant) daygecko

This is my 18x18x24 TerrariumPi environment for my Crested Gecko Taz!

• Mistking system controlled by timer
• HC-SR04 distance sensor for the mist king water tank.
• a DHT11 sensor (until I get something better)
• two DS18b20 temperature sensors
• a Miflora bluetooth sensor
• 2 Phillips Hue LED bulbs programmed for sunrise and sunset with 30 min fade in/out. Lights also transition to 5000k (blue-white) between 11 am - 3 pm.
• a heat mat controlled by Wemo switch
• a usb connected PS3 Eye camera with the infrared filter removed
• a Wii sensor bar repurposed as an infrared light source
• reed switch sensor on the door

https://imgur.com/a/njmZNhr