Fold same-cycle fixes into their parent Added bullets

The Fixed / Changed bullets for CT002/CT003 saturation, efficiency-
rotation lockup, and the MQTT_INSIGHTS empty-config crash / HA mosquitto
availability check referenced features introduced in this same release
cycle, so they weren't a standalone diff against main. Merged those PR
refs into the CT002/CT003 and MQTT Insights Added bullets (the end
state, which is what a main-viewer cares about). Modbus UNIT_ID fix
stays in Fixed — Modbus existed on main.

https://claude.ai/code/session_01BCVmemteVXNfoTQE4De2CU

Author: claude

CHANGELOG.md

@@ -12,8 +12,8 @@
 - **Removed** from-source / contributor workflow: Pipenv, `Pipfile`, and running `python main.py` from the repo root are gone — use **uv** and the **`astrameter`** command (or `uv run astrameter`) per [CONTRIBUTING.md](CONTRIBUTING.md).
 
 ### Added
-- **Added** CT002/CT003 emulation for steering multiple Marstek storage devices over the Marstek CT UDP protocol — fair-share load balancing, saturation-aware handoff, manual target override and forced rotation via MQTT, ARP-based consumer discovery, and an opt-in efficiency mode that concentrates power on fewer batteries at low demand (`MIN_EFFICIENT_POWER`, `EFFICIENCY_ROTATION_INTERVAL`, probe-based fades, `SATURATION_GRACE_SECONDS`) ([#283](https://github.com/tomquist/astrameter/pull/283), [#284](https://github.com/tomquist/astrameter/pull/284), [#287](https://github.com/tomquist/astrameter/pull/287), [#289](https://github.com/tomquist/astrameter/pull/289), [#294](https://github.com/tomquist/astrameter/pull/294), [#296](https://github.com/tomquist/astrameter/pull/296), [#298](https://github.com/tomquist/astrameter/pull/298), [#303](https://github.com/tomquist/astrameter/pull/303), [#310](https://github.com/tomquist/astrameter/pull/310), [#311](https://github.com/tomquist/astrameter/pull/311)).
-- **Added** MQTT Insights: optional `[MQTT_INSIGHTS]` section publishes internal state (grid power, targets, saturation, consumer topology, EMA poll interval) to MQTT with Home Assistant Device Discovery; per-consumer active/pause + manual target control; Shelly battery offline availability; auto-configured in the HA app when Mosquitto is installed ([#292](https://github.com/tomquist/astrameter/pull/292), [#294](https://github.com/tomquist/astrameter/pull/294), [#297](https://github.com/tomquist/astrameter/pull/297)).
+- **Added** CT002/CT003 emulation for steering multiple Marstek storage devices over the Marstek CT UDP protocol — fair-share load balancing, sample-rate-invariant time-weighted saturation detection with handoff, manual target override and forced rotation via MQTT, ARP-based consumer discovery, and an opt-in efficiency mode that concentrates power on fewer batteries at low demand (`MIN_EFFICIENT_POWER`, `EFFICIENCY_ROTATION_INTERVAL`, probe-based fades, `SATURATION_GRACE_SECONDS`) ([#283](https://github.com/tomquist/astrameter/pull/283), [#284](https://github.com/tomquist/astrameter/pull/284), [#287](https://github.com/tomquist/astrameter/pull/287), [#289](https://github.com/tomquist/astrameter/pull/289), [#291](https://github.com/tomquist/astrameter/pull/291), [#293](https://github.com/tomquist/astrameter/pull/293), [#294](https://github.com/tomquist/astrameter/pull/294), [#296](https://github.com/tomquist/astrameter/pull/296), [#298](https://github.com/tomquist/astrameter/pull/298), [#301](https://github.com/tomquist/astrameter/pull/301), [#303](https://github.com/tomquist/astrameter/pull/303), [#310](https://github.com/tomquist/astrameter/pull/310), [#311](https://github.com/tomquist/astrameter/pull/311), [#320](https://github.com/tomquist/astrameter/pull/320), [#321](https://github.com/tomquist/astrameter/pull/321)).
+- **Added** MQTT Insights: optional `[MQTT_INSIGHTS]` section publishes internal state (grid power, targets, saturation, consumer topology, EMA poll interval) to MQTT with Home Assistant Device Discovery; per-consumer active/pause + manual target control; Shelly battery offline availability; auto-configured in the HA app when Mosquitto is installed ([#292](https://github.com/tomquist/astrameter/pull/292), [#294](https://github.com/tomquist/astrameter/pull/294), [#297](https://github.com/tomquist/astrameter/pull/297), [#300](https://github.com/tomquist/astrameter/pull/300), [#306](https://github.com/tomquist/astrameter/pull/306)).
 - **Added** opt-in web-based configuration editor (`WEB_CONFIG_ENABLED = True` in `[GENERAL]`) accessible at `http://<host>:52500/config`; supports editing all config sections and keys with type-appropriate inputs, comment preservation, and a Save & Restart button ([#319](https://github.com/tomquist/astrameter/pull/319)).
 - **Added** HomeWizard P1 powermeter via the device WebSocket API, with optional `VERIFY_SSL` ([#231](https://github.com/tomquist/astrameter/pull/231), [#254](https://github.com/tomquist/astrameter/pull/254)).
 - **Added** SMA Energy Meter / Sunny Home Manager support via Speedwire multicast with device auto-detection and per-phase readings ([#252](https://github.com/tomquist/astrameter/pull/252)).
@@ -35,17 +35,12 @@
 
 ### Changed
 - **Switched** the Home Assistant powermeter integration from REST polling to the WebSocket API ([#232](https://github.com/tomquist/astrameter/pull/232)).
-- **Updated** the CT002/CT003 saturation EMA to be time-weighted for sample-rate invariance — slow meters no longer accumulate saturation faster per sample ([#321](https://github.com/tomquist/astrameter/pull/321)).
 - **Added** battery activity info logs for Shelly emulation to report detection, inactivity, and reconnection events ([#241](https://github.com/tomquist/astrameter/pull/241)).
 - **Reduced** throttling output noise by replacing unconditional `print` calls in `ThrottledPowermeter` with structured logging (`logger.debug` for routine wait/fetch/cache messages; failures remain at error level) ([#251](https://github.com/tomquist/astrameter/pull/251)).
 - **Improved** Shelly UDP server robustness by adding socket timeouts to avoid hangs during shutdown and testing ([#233](https://github.com/tomquist/astrameter/pull/233)).
 
 ### Fixed
 - **Fixed** Modbus `UNIT_ID` handling and clarified Home Assistant entity ID configuration in the docs ([#191](https://github.com/tomquist/astrameter/pull/191), [#195](https://github.com/tomquist/astrameter/pull/195)).
-- **Fixed** MQTT service availability check in the Home Assistant addon ([#306](https://github.com/tomquist/astrameter/pull/306)).
-- **Fixed** CT002 efficiency-rotation lockup when a push-based powermeter goes silent ([#320](https://github.com/tomquist/astrameter/pull/320)).
-- **Fixed** crash when the `[MQTT_INSIGHTS]` section has empty config values ([#300](https://github.com/tomquist/astrameter/pull/300)).
-- **Fixed** false saturation detection during load-sign reversal and battery ramp-down, and false saturation swaps under fluctuating household load ([#291](https://github.com/tomquist/astrameter/pull/291), [#293](https://github.com/tomquist/astrameter/pull/293), [#301](https://github.com/tomquist/astrameter/pull/301)).
 
 ## 1.0.8
 - Added support for Modbus holding registers through new `REGISTER_TYPE` configuration option ([#173](https://github.com/tomquist/b2500-meter/pull/173))