hardware-list-of-components.md

List of Components

Please, take into account that the frame is still a work in progress and this list might change.

This list of components is suitable for the u360gts official 3d printted frame.

Note: Other alternatives to this list are possible for other frames, please contact the community of users to get more information.

Mandatory parts:

• 1 x CONTROLLER: Naze32 rev5 acro / Bluepill / Naze32 rev5 full / Flip32 10dof / Spracing F3
• 1 x I2C 2.42" 128x64 OLED Display SSD1306/SSD1309(Arduino/PIC/Multi-wii).
• 1 x TILT SERVO: TowerPro MG996R
• 1 x PAN SERVO : TowerPro MG996R (You have to convert it to 360º)
• 2 x Momentary Push Button Switch
• 1 x 5V 3A BEC
• 1 X Bluetooth module HC-05
• 2 x Bearing 30mm x 55mm x 13mm for pan.
• 1 x Bearing 16mm x 5mm x 5mm for tilt.
• 1 x Battery 3S 11.1v 1800 mah XT60 plug
• 1 x XT60 female connector
• 1 x USB cable
• M2 screws
• M3 screws

Optional parts are:

• 1 x External magnetometer HMC5883L for Arduino
• 1 x GPS ublox/nmea compatible (with compass when using a Naze32 acro).
• 1 x Buzzer
• 1 x Slip Ring ZSR022 - 12 Wires 2A 500Rpm A Type
• 1 x Mini Switch button 220v 3A
• 1 x 8 Pin Aviation Connector Male Female
• 1 x Female panel power jack dc 5,5 x 2,1 mm-Electronics, Arduino

<< Go back