IOS App with version 5.0 not updating location

[timmcmic]

Launch IOS App and validate that modern interface is displayed.

Select a device from the devices menu.

Compare device on IOS to web interface.

Vehicle lags several seconds to + minutes behind active tracking on the web interface.

Vehicle location does not update when reselecting the unit.

App does eventually refresh but tracking does not appear to be as aggressive as old version.

[tananaev]

Do you happen to have a large number of devices? Because location updates are always done via WebSocket, so there should be no delay. By the way, check if WebSocket connection is working for you.

[timmcmic]

We have 5 devices. Websockets appear to be working from what i can tell - certainly not an area of expertise. I am seeing the lag across three different mobile IOS devices as well as the vehicle not updating after the device is awoken and a unit is selected. You can select the unit over and over and it does not update without resetting the application.

[tananaev]

Are you using modern or legacy app?

[timmcmic]

Using traccar manager on the iphone appears to be rendering the modern app by default. I had not switched back to the legacy app on the mobile devices.

The web interface tracks fine which is what i'm using for comparison.

[tananaev]

Web interface on the same phone works fine?

[timmcmic]

I did not try tracking it through the browser on the phone - I can try but then I cannot side by side on the same device.

[tananaev]

You can still compare to the working one, right? To see if it works.

[timmcmic]

Got it - standby - I'll see if I can get some ambulances moving and test.

[timmcmic]

Ok - so I went through and rebooted and attempted a repro. The app did pretty well. What I was able to reproduce was changing focus to a different app - then reopening the app and showing that the unit does not update automatically and did not refresh when clicking on the unit.

I have a video if you have somewhere to send a link.

[tananaev]

You should be able to upload the video here directly. Did it work correctly in the legacy app?

[timmcmic]

In the mobile IOS app - how do I go ahead and change to the legacy interface?

[tananaev]

On the login screen there's a button to switch.

[timmcmic]

Ok - give me a few minutes. I'm already logged in on the mobile app i'll log out and give it a go.

[timmcmic]

Ok found it - it looks like a refresh button in the top right hand corner so it was not obvious sorry.

[timmcmic]

Followed the same steps on the repro - two devices. One iphone using the modern interface one ipad using the legacy. Both of them did the same thing. Take the apps out of focus and switch to - for example mail. Wait - bring the apps back in focus. The unit that was originally selected does not move. Reselect the unit from either the unit selection in modern or the table in legacy. The unit does not change location. App must be exited and come back in.

On a PC with the modern web interface running (not the host running traccar) the issue does not reproduce.