major update from private branch

Author: trouch

resources/bundled_packages/cura.json

@@ -0,0 +1,53 @@
+{
+    "version": 2, 
+    "name": "101Hero",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "rikky",
+        "manufacturer": "101Hero",
+        "file_formats": "text/x-gcode",
+        "platform": "101hero-platform.stl",
+        "supports_usb_connection": true,
+        "preferred_quality_type": "draft",
+        "machine_extruder_trains":
+        {
+            "0": "101Hero_extruder_0"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "101Hero" },
+        "machine_shape": { "default_value": "elliptic"},
+        "machine_heated_bed": { "default_value": false },
+        "machine_width": { "default_value": 149.86 },
+        "machine_depth": { "default_value": 149.86 },
+        "machine_height": { "default_value": 99.822 },
+        "machine_center_is_zero": { "default_value": true },
+        "machine_head_with_fans_polygon": {
+            "default_value": [
+                [ 0, 0 ],
+                [ 0, 0 ],
+                [ 0, 0 ],
+                [ 0, 0 ]
+            ]
+        },
+        "speed_print": {  "default_value": 14 },
+        "speed_travel": { "value": "speed_print" },
+        "speed_infill": { "default_value": 14 },
+        "speed_wall": { "value": "speed_print * 0.7" },
+        "speed_topbottom": { "value": "speed_print * 0.7" },
+        "speed_layer_0": { "value": "speed_print * 0.7" },
+        "gantry_height": { "default_value": 0 },
+        "retraction_speed": { "default_value" : 10 },
+        "retraction_amount": { "default_value" : 2.5 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+
+        "machine_start_gcode": {
+            "default_value": "G21       ;metric values\nG90       ;absolute positioning\nM82       ;set extruder to absolute mode\nM107      ;start with the fan off\nG28 Z0    ;home Z\nG1 Z15.0 F840\nG92 E0    ;zero the extruded length\nG1 F200 E3              ;extrude 3mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F840\n;Put printing message on LCD screen\nM117 Printing...\n"
+         },
+        "machine_end_gcode": {
+            "default_value": "M104 S0     ;extruder heater off\nM140 S0     ;heated bed heater off (if you have it)\nG91         ;relative positioning\nG1 E-1 F300 ;retract the filament a bit\nG1 Z0.5 E-5 F840 ;move Z up a bit and retract even more\nG28 X0 Y0   ;home X/Y, so the head is out of the way\nM84         ;steppers off\nG90         ;absolute positioning"
+        }
+    }
+}

resources/definitions/101Hero.def.json

@@ -0,0 +1,56 @@
+{
+    "version": 2,
+    "name": "3Dator",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "3Dator GmbH",
+        "manufacturer": "3Dator GmbH",
+        "file_formats": "text/x-gcode",
+        "supports_usb_connection": true,
+        "platform": "3dator_platform.stl",
+        "machine_extruder_trains":
+        {
+            "0": "3dator_extruder_0"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "3Dator" },
+        "speed_travel": { "default_value": 120 },
+        "prime_tower_size": { "default_value": 8.660254037844387 },
+        "infill_sparse_density": { "default_value": 20 },
+        "speed_wall_x": { "default_value": 45 },
+        "speed_wall_0": { "default_value": 40 },
+        "speed_topbottom": { "default_value": 35 },
+        "layer_height": { "default_value": 0.2 },
+        "speed_print": { "default_value": 50 },
+        "speed_infill": { "default_value": 60 },
+        "machine_heated_bed": { "default_value": true },
+        "machine_center_is_zero": { "default_value": false },
+        "machine_height": { "default_value": 260 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_depth": { "default_value": 170 },
+        "machine_width": { "default_value": 180 },
+        "retraction_speed": {"default_value":100},
+        "cool_fan_speed_min": {"default_value": 20},
+        "cool_fan_speed_max": {"default_value": 70},
+        "adhesion_type": { "default_value": "none" },
+        "machine_head_with_fans_polygon": {
+            "default_value": [
+                [-15, -25],
+                [-15, 35],
+                [40, 35],
+                [40, -25]
+            ]
+        },
+        "gantry_height": {
+            "default_value": 30
+        },
+        "machine_start_gcode": {
+            "default_value": ";Sliced at: {day} {date} {time}\nM104 S{material_print_temperature} ;set temperatures\nM140 S{material_bed_temperature}\nM109 S{material_print_temperature} ;wait for temperatures\nM190 S{material_bed_temperature}\nG21  ;metric values\nG90  ;absolute positioning\nM82  ;set extruder to absolute mode\nM107  ;start with the fan off\nG28 Z0  ;move Z to min endstops\nG28 X0 Y0  ;move X/Y to min endstops\nG29  ;Auto Level\nG1 Z0.6 F{speed_travel} ;move the Nozzle near the Bed\nG92 E0\nG1 Y0  ;zero the extruded length\nG1 X10 E30 F500  ;printing a Line from right to left\nG92 E0  ;zero the extruded length again\nG1 Z2\nG1 F{speed_travel}\nM117 Printing...;Put printing message on LCD screen\nM150 R255 U255 B255 P4 ;Change LED Color to white"      },
+        "machine_end_gcode": {
+            "default_value": "M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28                          ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning"
+        }
+    }
+}

resources/definitions/3dator.def.json

@@ -0,0 +1,83 @@
+{
+    "name": "ABAX PRi3",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "file_formats": "text/x-gcode",
+        "machine_extruder_trains":
+        {
+            "0": "abax_pri3_extruder_0"
+        }
+    },
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y215                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 225
+        },
+        "machine_depth": {
+            "default_value": 220
+        },
+        "machine_height": {
+            "default_value": 200
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
+    }
+}

resources/definitions/abax_pri3.def.json

@@ -0,0 +1,83 @@
+{
+    "name": "ABAX PRi5",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "file_formats": "text/x-gcode",
+        "machine_extruder_trains":
+        {
+            "0": "abax_pri5_extruder_0"
+        }
+    },
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 310
+        },
+        "machine_depth": {
+            "default_value": 310
+        },
+        "machine_height": {
+            "default_value": 300
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
+    }
+}

resources/definitions/abax_pri5.def.json

@@ -0,0 +1,83 @@
+{
+    "name": "ABAX Titan",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "ABAX 3d Technologies",
+        "manufacturer": "ABAX 3d Technologies",
+        "file_formats": "text/x-gcode",
+        "machine_extruder_trains":
+        {
+            "0": "abax_titan_extruder_0"
+        }
+    },
+    "overrides": {
+        "machine_start_gcode": {
+            "default_value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z5.0 F200          ;move Z to position 5.0 mm\nG92 E0                  ;zero the extruded length\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "default_value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nM140 S0  ;set temp of bed to Zero  \nG91                     ;set to relative positioning\nG1 E-10 F300            ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300                 ;move X to min and Y to max \nG90                     ;set to absolute positioning\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "default_value": 310
+        },
+        "machine_depth": {
+            "default_value": 310
+        },
+        "machine_height": {
+            "default_value": 300
+        },
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 1
+        },
+        "top_bottom_thickness": {
+            "default_value": 1
+        },
+        "bottom_thickness": {
+            "default_value": 1
+        },
+        "material_print_temperature": {
+            "default_value": 200
+        },
+        "material_bed_temperature": {
+            "default_value": 0
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_infill": {
+            "default_value": 70
+        },
+        "speed_wall": {
+            "default_value": 25
+        },
+        "speed_topbottom": {
+            "default_value": 15
+        },
+        "speed_travel": {
+            "default_value": 150
+        },
+        "speed_layer_0": {
+            "default_value": 30
+        },
+        "support_enable": {
+            "default_value": true
+        }
+    }
+}