upd

Author: MustafaMulla29

tests/repros/repro58-pcb-autolayout-out-of-board.test.tsx

@@ -2,93 +2,97 @@ import { expect, test } from "bun:test"
 import { getTestFixture } from "tests/fixtures/get-test-fixture"
 import { sel } from "lib/sel"
 
-test("pcb autolayout out of board", async () => {
-  const { circuit } = getTestFixture()
+test(
+  "pcb autolayout out of board",
+  async () => {
+    const { circuit } = getTestFixture()
 
-  circuit.add(
-    <board width="25.4mm" height="25.4mm">
-      <group>
-        <chip name="U1" footprint="soic20_pw0.6_pl3.9_w11.9_p1.25" />
-        <capacitor
-          name="C1"
-          capacitance="0.1uF"
-          footprint="0603"
-          schX={-2}
-          schY={0}
-          schRotation={-90}
-          connections={{
-            pin2: [sel.U1.pin20, sel.net.GND],
-            pin1: [sel.U1.pin19, sel.net.V3_3],
-          }}
-        />
-        <capacitor
-          name="C2"
-          capacitance="4.7uF"
-          footprint="0603"
-          connections={{ pin2: sel.U1.pin20, pin1: sel.net.V3_3 }}
-          schRotation={-90}
-          pcbRotation={180}
-        />
-        <resistor
-          name="R1"
-          resistance="2.2k"
-          footprint="0603"
-          schRotation={90}
-          connections={{ pin1: sel.U1.pin9, pin2: sel.JP1.pin3 }}
-        />
-        <resistor
-          name="R2"
-          resistance="2.2k"
-          footprint="0603"
-          schRotation={90}
-          connections={{ pin1: sel.U1.pin10, pin2: sel.JP1.pin1 }}
-        />
-        <resistor
-          name="R3"
-          resistance="4.7k"
-          footprint="0603"
-          schRotation={90}
-          connections={{ pin1: sel.D1.pin1, pin2: sel.JP2.pin1 }}
-        />
-        <led
-          name="D1"
-          color="RED"
-          footprint="0603"
-          schRotation={-90}
-          connections={{ pin2: sel.net.GND }}
-        />
-        <solderjumper
-          name="JP1"
-          footprint="solderjumper3_bridged123_pw0.66_pl1.270_p1"
-          layer="bottom"
-          bridgedPins={[["1", "2", "3"]]}
-          pcbRotation={90}
-          schRotation={180}
-        />
-        <solderjumper
-          name="JP2"
-          footprint="solderjumper2_bridged12_pw0.66_pl1.270_p1"
-          layer="bottom"
-          bridgedPins={[["1", "2"]]}
-          pcbRotation={90}
-          schRotation={180}
-          connections={{ pin2: sel.net.V3_3 }}
-        />
-        <jumper
-          name="JP3"
-          footprint="pinrow4_id1.016_od1.88_nosquareplating_pinlabeltextalignright_pinlabelorthogonal_doublesidedpinlabel_pinlabelverticallyinverted"
-          connections={{ pin3: sel.U1.pin10 }}
-        />
-      </group>
-    </board>,
-  )
+    circuit.add(
+      <board width="25.4mm" height="25.4mm">
+        <group>
+          <chip name="U1" footprint="soic20_pw0.6_pl3.9_w11.9_p1.25" />
+          <capacitor
+            name="C1"
+            capacitance="0.1uF"
+            footprint="0603"
+            schX={-2}
+            schY={0}
+            schRotation={-90}
+            connections={{
+              pin2: [sel.U1.pin20, sel.net.GND],
+              pin1: [sel.U1.pin19, sel.net.V3_3],
+            }}
+          />
+          <capacitor
+            name="C2"
+            capacitance="4.7uF"
+            footprint="0603"
+            connections={{ pin2: sel.U1.pin20, pin1: sel.net.V3_3 }}
+            schRotation={-90}
+            pcbRotation={180}
+          />
+          <resistor
+            name="R1"
+            resistance="2.2k"
+            footprint="0603"
+            schRotation={90}
+            connections={{ pin1: sel.U1.pin9, pin2: sel.JP1.pin3 }}
+          />
+          <resistor
+            name="R2"
+            resistance="2.2k"
+            footprint="0603"
+            schRotation={90}
+            connections={{ pin1: sel.U1.pin10, pin2: sel.JP1.pin1 }}
+          />
+          <resistor
+            name="R3"
+            resistance="4.7k"
+            footprint="0603"
+            schRotation={90}
+            connections={{ pin1: sel.D1.pin1, pin2: sel.JP2.pin1 }}
+          />
+          <led
+            name="D1"
+            color="RED"
+            footprint="0603"
+            schRotation={-90}
+            connections={{ pin2: sel.net.GND }}
+          />
+          <solderjumper
+            name="JP1"
+            footprint="solderjumper3_bridged123_pw0.66_pl1.270_p1"
+            layer="bottom"
+            bridgedPins={[["1", "2", "3"]]}
+            pcbRotation={90}
+            schRotation={180}
+          />
+          <solderjumper
+            name="JP2"
+            footprint="solderjumper2_bridged12_pw0.66_pl1.270_p1"
+            layer="bottom"
+            bridgedPins={[["1", "2"]]}
+            pcbRotation={90}
+            schRotation={180}
+            connections={{ pin2: sel.net.V3_3 }}
+          />
+          <jumper
+            name="JP3"
+            footprint="pinrow4_id1.016_od1.88_nosquareplating_pinlabeltextalignright_pinlabelorthogonal_doublesidedpinlabel_pinlabelverticallyinverted"
+            connections={{ pin3: sel.U1.pin10 }}
+          />
+        </group>
+      </board>,
+    )
 
-  await circuit.renderUntilSettled()
+    await circuit.renderUntilSettled()
 
-  const circuitJson = circuit.getCircuitJson()
+    const circuitJson = circuit.getCircuitJson()
 
-  // TODO uncomment when fixed
-  //expect(circuit.db.pcb_component_outside_board_error.list()).toEqual([])
+    // TODO uncomment when fixed
+    //expect(circuit.db.pcb_component_outside_board_error.list()).toEqual([])
 
-  expect(circuitJson).toMatchPcbSnapshot(import.meta.path)
-})
+    expect(circuitJson).toMatchPcbSnapshot(import.meta.path)
+  },
+  { timeout: 80000 },
+)